I need to reverse the system migration done through migration assistant

Hi All,
I have purchased a new macbook air 13".
From my previous macbook pro i have migrated the sysem using migration assistant.
i now want to reverse the migration and bring the machine back to the pre-migration stage.
Please guide me how to go about doing this.
Thankyou in advance.

Hi Again,
I did the procedure as detailed in the KB, but an unfortunate thing has happened. After neraly 4 hours (on a 512kbps net connection), it gave an error "Cannot find installation information for this machine - contact Apple Care".
When I spoke to Apple Care they guided me with the same procedure, but even after retrying, the status remains the same. Now I am stuck with a brand new Macbook Air with me that I cannot use at all due to this recovery goof-up.
Please please ... some one help.
Many thanx in advance.

Similar Messages

Will the System Migration Assistant Migrate all of my Passwords?

Hello,
I need to Migrate all of my password from my Lenovo X301 to my new Lenovo X1. Will the System Migration Assistant do this?
Thanks.

are you using thinkvantage password manager, if you are open TVPWM use the import/export to backup your passwords, copy to USB
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4.

I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4. We moved, and I have looked everywhere. Am I doomed to find a way to buy it? Can taking it into the Apple Store fix it? Will it be expensive THERE? I've already saved all of the files I want off of it.... I just need it to work now.

You've lost me on why you need to reinstall Tiger, when you already have all the files you wanted (which means Tiger worked perfectly fine). If you want to upgrade to Leopard, that's a different issue: your Mac needs to meet the minimum system requirements for that, which you can easily determine.
If you just want to get a replacement set of Tiger install discs, you can try calling AppleCare and see if they're able to send you a replacement set, and if not, you'll have to buy a new set yourself. You can get them on eBay, Craigslist, and HardCore Mac (http://store.yahoo.com/hardcoremac/), although they sell it for ridiculous prices.
< Edited by Host >

I need to get the system time in Micro second

Hi,
In the java API there is a static method �curentTimeMillis�, but I need
to get the system time in Micro second there is a equivalent method? Or
there exists any suggested solution?
Thanks
Dany

Why do you need such accurate timing ?
I'd be suprised if anyone seriously relies on millisecond timing in
Java, never mind calling through to JNI to get microsecond timing.
If that's even possible in native code.
The garbage collector can cause delays/pauses in a java program and
throw timings off by at least 500 milliseconds, probably more under big loads.
If you just want a more accuruate way to reset a random seed, there's probably other ways...
regards,
Owen

Dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

I work in the power conversion industry and do these types of measurements all the time…
Do you want to just measure power quality or create and measure power quality problems?
What hardware are you using?
Power quality analyzer?
Programmable AC power source?
Fast Transient Generator?
Here is an example of what I do.
To create PQ problems I use a California Instruments AC source set to nominal power for the unit under test. Using Labview I program several transients consisting of fixed and random duration dropouts and surges. I also use a Schaffer Fast Transient Burst Generator to apply high frequency noise bursts directly onto power lines.
For measuring power quality I use a Voltech PM3000A power analyzer and Labview to measure everything from voltage, current, and frequency, to harmonics and %THD
Message Edited by RTSLVU on 07-23-2008 10:31 AM

System Migration Assistant

I have previously used SMA to migrate settings to new lenovo laptops, it it still available and if so where can i find it? I have to migrate some users to new lenovo thinkpad Edge Win 7 machines.
Solved!
Go to Solution.

System Migration Assistant (SMA) was withdrawn at the end of 2013. See http://support.lenovo.com/en_US/detail.page?DocID=HT080684
Looks like the support website hasn't been totally cleaned up and still has an old version. I don't recommend using it.

System Migration Assistent - Migrating Vista-- Windows 7

T61 + Vista
When I receive Windows 7, can the ThinkVantage System Migration Assistant move current Vista settings to Windows 7 or does the utility only work within the same OS?
Thanks,
Mark
Moderator Note; edited subject for relevancy
Message Edited by andyP on 07-15-2009 09:45 PM

Yes Mark, It should be able to. I see why no reason why it shouldn't work.
Moderator Note; edited subject for relevancy
Message Edited by andyP on 07-15-2009 09:46 PM
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

System Migration Assistant select a profile

I am using the ThinkVantage System Migration Assistant 6.0 to migrate my data from my old lenovo laptop to a new lenovo laptop. On the Current Laptop (Laptop being used) I am able to select what profile I want to transfer. However on the Target Laptop (New Laptop) I am not able to select what profile to transfer the data to. Is there anyway to select what profile I can transfer the data to on the new laptop?

Hi
Welcome To Lenovo Community
You may also refer below link which will guide you through the deployment
http://support.lenovo.com/en_US/product-and-parts/detail.page?LegacyDocID=MIGR-73571
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-50889
Hope This Helps
Cheers!!!

Where is the Windows Migration Assistant?

Window XP machines does not appear in the Lion Migration Assistant. Do I need to download software to the PC before running the Migration Assistant? Where is the software to download?

Is this what you want: Windows Migration Assistant for Lion?
Also, see Boot Camp - Installation & Setup Guide (OS X Lion)

Help writing a excel macro to do a copy of 4 cells and paste transpose. I need to loop the copy and paste through 6900 rows of data.

I need help writing a excelmacro to do a copy of 4 cells and paste transpose. I need to loop the copy and paste through 6900 rows of data. I started the macro with two rounds of copying & paster transposed but I need help getting it
to loop through all rows. Here is what macro looks like now.
    Range("I2:I5").Select
    Application.CutCopyMode = False
    Selection.Copy
    Range("J2").Select
    Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
        False, Transpose:=True
    Range("I6:I9").Select
    Application.CutCopyMode = False
    Selection.Copy
    Range("J6").Select
    Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
        False, Transpose:=True
End Sub

Thanks Jim for the solution above.
Hi Brogents,
Thanks for posting in our forum. Please note that this forum focuses on questions and feedback for Microsoft Office client. For any
VBA/Macro related issues, I would suggest you to post in the forum of
Excel for Developers, where you can get more experienced responses:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT2518 Where do i find the Windows Migration Assistant I'm supposed to download on my PC from Apple (step 2)?

Where do i find the Windows Migration Assistant I'm supposed to download on my PC from Apple (step 2)?

http://www.apple.com/support/macbasics/migration/

I need to reinstall the OS but don't have relevant disk?

Hi there, my OS has been having LOADS of glitches lately. It started when we were trying to get wifi working on a HP printer and I was trying to reinstall the drivers. The system crashed (we couldn't get past the boot up screen) and we did a permissions repair and disk repair from safe mode. This got us up and running again but theres a number of issues since (installer.app is not there, some issues using microsoft office and a few other bits)
Anyway we've backed up our stuff and were all aready to do a reinstall from disk but now we can't as I'm running 10.7.4 (lion) and our disk is for snow leopard.
I'd really love some advice. I'm quite new to mac. We've had windows PCs for years and I'm fairly familiar with maintenance and reinstalls etc, but only bought our first macbook last year. It's like learning a foreign language, albeit a really nice one Any tips on reinstalling and maintenance thereafter would be really appreciated.
Thanks.

I'd do a clean install from your Snow Leopard discs. Insert Disc 1 and erase and partition your drive and install SL. No need to do a secure erase as you're not selling your computer. After the clean install, you should be able to go back to the App Store and re-download Lion (as you've already purchased it) and install Lion. Then, one by one, start re-installing your apps. Then you can begin copying the files that you've backed up.
Am I right in assuming that you don't have a Time Machine back-up? If you do, after you install Lion, you can simply reboot to the recovery partition (Command-R) and restore your latest back-up. If you don't have a Time Machine back-up, you'll just have to use the clean install. I would suggest that after you do get everything up and running that you either use the external drive that you used to back-up your files as a Time Machine disk or buy another external drive, 2-3x the size of your internal, to create a Time Machine back-up. Some would advise to use something other than Time Machine, such as Carbon Copy Cloner, but I've been with Time Machine since it came out and use it religiously. Has saved me untold number of agonies.
Good luck - if you're not following these instructions perhaps someone will jump in with something more helpful.
Clinton

I need to reverse the command and let the computer use Windows to search the program I want to use t

I am not sure if you can help me. I need to command my computer to look for a program that is most suited to open files automatically. I accidentally check the mannual mode and appointed Adobe Reader x to be the designated program. Now nothing will open. How can I undo what I did last night and reverse the process to restore my original setting?

You made Adobe Reader the default progrm for what: .pdf files, or anything else?
"Nothing will open" means what, programs, files, any files?
Try a System Restore to a date before you made the change.

Physical Inventory - need to reverse the posting

Hello Everybody,
We performed a cylce count on work center in a plant. There were 4 numbers that we had to do a recount on. I was unable to enter the recounts. By mistake I posted the document before the changes were made. I tried to cancel the mat doc but was unsuccessful. I need this posting reversed.
Can anyone pls guide me.....?

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock

Need to change the system status in CRMD_ORDER

Hi,
The status of the deffect is set to "Relase Items" in crmd_order. Now if i try to do any changes it is not allowing me to change. Is there any way to reset the system Status .
Your help is appriated.
Regards,
Srilu.
Edited by: Srilu.M on Oct 15, 2010 8:32 AM

hi
refer this thread, the same scenario
[Re: CRMD_ORDER - Status|Re: CRMD_ORDER - Status]
jansi

I need to reverse the system migration done through migration assistant

Similar Messages

Maybe you are looking for