I need to run Illustrator in Rosetta Mode and the option isn't in Get Info

Hello everyone,
I need help. I need to run Illustrator in Rosetta Mode and the option isn't in Get Info.
I'm using CS3 on a Mac Book Pro 2.16GHz with 2gigs of RAM. When I get info on the Illustrator App, there isn't a rosetta option.
To be clear, I'm right-clicking on the icon in the dock, choosing 'show in finder', clicking on the Illustrator icon in there and there's no option.
NOW, my copy of Photoshop HAS the option! It's in the general tab just over the Lock option.
Any help would be greatly appreciated!!!
Thanks!

Trash your preferences for a starter.

Similar Messages

Running Firefox 4.0 on Mac OSX 10.6.6, using ATT mail, when I create a new email I get a browser message saying, "This page requires a plugin that can only run in 32-bit mode," and I have to restart Firefox in 32-bit mode. Is there any way around this?

I am assuming the plugin that the Firefox message is referring to is for attaching a file to the email. I say this because at the bottom of a new email it has a link that says "Attach files more easily" which, when you click it, takes you to a setup process where you download an att updater. I ran that and it did seem to change anything. I am wondering if there is anything I can do to make Firefox handle this page without having to restart in 32-bit mode every time.

That means that you need to run Firefox in 32 bit mode if you want to use that plugin.
# Close Firefox
# Open the Applications folder in Finder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox

For BPC how to enable Wow6432 compatibility to run in 32 bit mode on the 64

Dear friends
I am going to install BPC 7.0 so I want to enable following issues on my windows OS 64Bit
"If you run this on 64 bit hardware, you must configure it to enable
Wow6432 compatibility to run in 32 bit mode on the 64 bit system"
can any tell me solution as soon as possible
regarads
krishna
Edited by: krishna murthy on Feb 24, 2010 11:24 AM

hi,
as you read, your BPC was designed for NET1.1 which build under 32bit platform while NW AS ABAP needs 64 bit environments to run. wow3264 is to enable your 32 bit application to run on 64 bit platform in this case BPC NET component can run on 64 bit. wow3264 is windows registry keys. so you can find it in the registry value using regedit.msc.
may this help you.

Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

Hello guys,
            Problem has been solved -
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
1. If you install 64 bit oracle this is not an issue. Install 64 bit oracle.
2. Download odp.net 32 bit from below link:-
    ODP.NET Managed Driver Beta Download</title><meta name="Title" content="ODP.NET Managed Driver B…
3. installed the odp.net.
4. open the visual studio 2010.
5.Select new - project - asp.net web application - project name -ok
6.select tools- > connect to database- then follow the following steps
                         i> user name - your user name/client username (example -- hr)
                         ii> password -- enter your password/client password (example- hr)
                        iii>select connection type -- if you want to connect client database then- select EZ connect other wise select tns
                        iv>test the connection- then you will get connection succeed.
                        v> then click ok
Thanks
Chandrashekhar

You do not need to do anything in VS. You do need to configure both tnsnames.ora files, because the drivers do not share any data.
Please see:
http://sqlblog.com/blogs/jorg_klein/archive/2011/06/09/ssis-connect-to-oracle-on-a-64-bit-machine.aspx

Running in 64 bit mode with the 32 bit Oracle client installed

I have seen many postings on this issue but none of the suggested solutions have helped me.
I am running visual studio 2010 professional with SP1 on windows 7 64 bit machine. When I try to run a web service locally and call it with SoapUI, I get the following error message during OracleConnection.Open().
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
I have tried setting up the build configuration and the project settings to target 32 bit but that has not helped. I have also tried removing the reference to System.Data.OracleClient that shows being under Program Files (x86) and add a new reference to the dll under GAC_64. That too did not work.
I only have the 64 bit client installed on my machine.
Any help will be appreciated.
Thank you

1. Visual Studio any version is 32 bit ONLY irrespective of hardware or OS bits. So to DEVELOP with Oracle Client you MUST install 32 bit Oracle ODAC components. Task manager will show devenv.exe *32 (to confirm 32 bit Visual Studio application).
2. You can run your web application inside IIS/IIS Express in your PC which independently can be either 32bit or 64bit. If it is 64 bit, you MUST also install 64 bit Oracle ODAC components which means you'll have to install both 32bit and 64bit in your 64 bit Win7 running on 64bit hardware.
3. In Visual Studio if you compile with "AnyCPU" as target, the resultant binaries (Web/NonWeb) can be both 32bit or 64bit. So if target PC is "AnyCPU" or "x64", you MUST install Oracle ODAC 64 bit in the target OS if that target OS is 64bit. You don't have to install 32bit ODAC in the target PC.
4. One more catch to above scenario is the target OS could be 64bit simulated OS on a 32bit hardware. In such case you MUST install both 32bit and 64bit ODAC components.
So while you ask your network team to download ODP.NET/ODAC Components make sure you ask them to download both 32bit and 64bit. Total nearly 600MB.
Hope this helps many people out there.

This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bit

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Itunes is running in 64-bit mode and will not let me switch to 32- bit mode

I guess 64-bit mode requires MAC OS X 10.7 and I only have 10.6.8 so somehow i need to switch back to 32-bit mode and the instructions it gives me to do so don't make any sense. help!

At Mike Johnson12's suggestion I posted my problem separately at https://discussions.apple.com/message/15801854#15801854 . The only response I have received there so far is from another person who has experienced the same problem you & I have. That makes at least 3 of us. Please feel free to hijack my post there if you think it might help!

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7.

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7. When will you respond??

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.
Now when Firefox hangs, is this randomly, on specific websites, etc.? You can also read [https://support.mozilla.org/en-US/kb/Firefox-hangs https://support.mozilla.org/en-US/kb/Firefox-hangs]

My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address. Have since upgraded the e-mail addre

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct. Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in. It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me. Any assistance would be much appreciated, Thanks

Hi rbcjoker76, and a warm welcome to the forums!
Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
Required Fonts from 10.3, much the same in 10.4...
http://support.apple.com/kb/HT2444?viewlocale=en_US
You may have to get Pacifist...
http://www.charlessoft.com/
then intall the Fonts what you need from your Install Disk.
Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

My phone is on recovery mode and the only way out is to restore it but i dont wanna loose any of my memory on there what can i do?

my phone is on recovery mode and the only way out is to restore it but i dont wanna loose any of my memory on there what can i do?

ceci09 wrote:
my phone is on recovery mode and the only way out is to restore it
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

After watch a video in "full screen mode" and the video shrinks back into the eBook view, HALF of the TOP Title Bar DISAPPEARS, But it does not happen with ios 6.1

After watch a video in "full screen mode" and the video shrinks back into the eBook view, HALF of the TOP Title Bar DISAPPEARS, But it does not happen with ios 6.1

The Mac has never needed "Full Screen". It has done multiple screen Extended Desktop since 1987.
Full screen is an iPhone feature, carried into this verion with the mult-touch gestures and other so-called "unifying" features.

HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

I need to run Illustrator in Rosetta Mode and the option isn't in Get Info

Similar Messages

Maybe you are looking for