I need to synchronize my computer

I need to synchronize Pc to my I phone 4s to get pictures and video from pc to i phone. How do i do that?

Camera roll photos and videos don't sync at all. The must be imported to your computer as you would any digitial camera. Follow this guide: http://support.apple.com/kb/HT4083.

Similar Messages

HT2480 I need help syncing my computer outlook email (through Yahoo) with my Iphone. when I delete an email on my computer is it still in my inbox on my phone. Any help is appreciated.

I need help syncing my computer outlook email (through Yahoo) with my iphone. When I delete an email on my computer it is still in my inbox on my phone. Please help.

Your computer is probably set up to access your Yahoo mail using POP3. POP3 does not synchronize with the server. For full synchronization, you will need to use IMAP instead. See the Yahoo mail help pages for instructions on how to configure your mail client.

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

HT204074 I am trying to download apps to the iPad that we just purchased from iTunes. I click on all the apps I want downloaded and it keeps telling me I need to authorize this computer . I have done what they told me to do and still wont let me downlo

I am trying to downloadapps onto the iPad we just purchased, and it keeps telling me that I need to authorize my computer. I go ahead and authorize by going into iTunes/store/authorize computer, I verify the information that is given. I go back and try to redownload the apps and I get the same exact message, this computer is not authorized for this device. What am I doing wrong?

I have been trying to work through this problem by myself and have so far downloaded the most current version of iTunes. Frome there when it tells me I have to authorize this computer, I had to not put in the iPad information, I had to authorize with my current iTunes information, and any iPad or iPod, iPhone information. I have several people in the family that have different accounts, so I had to authorize each and every individual account because I didnt know which apps or music was purchased under which user. Hope this helps others.... Good luck!!

Can't get past a grey "you need to restart your computer screen"

Hello,
I have a few month old iMac 27" i7 quad core for music use and did an update this morning which consisted of an itunes update and update to the screen firmware and two other things I can't remember. Do the usual install and restart business and am now met with the following error:
panic(cpu 0 caller 0x558271): "Unable to find device driver for this platform: \"ACPI". \n"@/SourceCache/xnu/xnu-1504.3.12......................
Debugger called: <panic>
Backtrace (CPU 0) , Frame: Return Address (4 potential args on stack)
7 lines of numbers and letters (please let me know if you need these)
BSD process name correspoding to current thread: Unknown
Mac OS Version:
Not yet set
Kernal Version:
Darwin Kernel Version 10.3.0...............
System uptime in nanoseconds: 322691563
This is on the grey screen with the multi lingual "you need to restart your computer message"
Holding shift on startup bypasses the screen and allows me to eject the disk and boot in safe mode or whatever it's called but the bar down the bottom fills up and I'm just left with the rotating bars and the apple logo.
I have tried a few different suggestions I have found on other threads about holding a certain key to start in safe mode or something to that effect but nothing has worked.
I have inserted the OSX install dvd that came with the computer and restarted but that did nothing and now I cannot eject it.
I have backed up a lot of the stuff on there but it will be a huuuuuge inconvenience if I lose the data on this thing.
Any help is greatly appreciated!
Cheers,
Stephen

This is called a "kernel panic" (the multi-lingual restart screen). Solving them can be tricky. From the sounds of it, you can probably rule out hardware, but you probably have pretty severe system damage, probably caused by bad hard drive damage. But without more information, it's hard to say. Try looking over [the X Lab FAQ on resolving kernel panics|http://www.thexlab.com/faqs/kernelpanics.html].

What adapter do i need to connect my computer to the internet

I am woundering what adapter i need to plug into my computer so that i can plug my computer directly into the wall and use the internet using a ethernet cord. I am not wanting to use wify for that does work great. I have to plug my computer directly into the internet using an ethernet cable unfornately the new mac pros do not come with and ethernet port. I am wanting to do this because of 3D gaming they say that i can not use wify to play that particular game but have to be connected directly. I do how ever have thunderbolt port actually two. I also have usb 3.0 the mac store says that i need a thunder bolt ethernet adapter but which one i need to buy. I have been reading alot on those adapters and they say that the adapter is Giabit ethernet adapter will that work with normal internet speeds or is that cable just for a gigabit Network it is hard to understand all the details and what is going to work... I have also heard that the thunderbolt is faster but what the thunder bolt is used for is to connect a display or is it used also to connect to the internet directly. any help on this would be great.. My question again is what adapter do i need to hook my computer directly to the internet?

You need the Thunderbolt to Ethernet adapter > http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap ter
Thunderbolt is a video, audio and data port, so you can use it to connect external displays, external drives or different adapters to connect a display or connect the Mac to the Internet. In the case of Ethernet, you won't notice the Thunderbolt speed, as it's more for external disks

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

I need to reinstall my computer, how do I deal with Premiere pro and After effects?

Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejoking

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620)

I can't install Firefox 5. It downloads & starts the wizard. I follow the prompts till it says it needs to restart the computer 'to complete a previous upgrade of firefox' . I say yes and it restarts and there is no sign of firefox and no error message.

The very first time I tried this there was a red message that flashed on the screen too fast to read it. I have Windows 7 and AVG. My son's computer also has Windows 7 and AVG and his upgrade went without a hitch. It deleted my old version of firefox (3.6.12) so now I'm using IE. Windows installed a lot of updates just before I tried upgrading firefox. I have tried turning my firewall down. I have gone to the file in downloads and double clicked it and it does the same thing. It always says it needs to restart the computer even though I have closed all other applications. Should I just give up and try reinstalling an older version of Firefox? Thanks

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

When I turn off my mini, and at other random times, i get a message saying I need to restart my computer

When I turn off my mini, and at other random times, i get a simple message that says I need to restart my computer. any suggestions?

The message to restart your computer, in multiple languages, is a kernel panic. This is usually, but not always, caused by hardware, with memory being the leading cause.
You might want to run the Apple hardware test, which is on the original gray-faced OS X disks that came with the mini. FInd the one that says 'AHT Version x.x' in small print on the label, insert and reboot holding the alt/option key down. Choose the Apple hardware test, and when prompted, choose the extended test. You can also download Rember from http://kelleycomputing.net/rember/ if you want to really test the memory. Set it up and let it run over night.
See this kernel panic FAQs for other ideas: http://www.thexlab.com/faqs/kernelpanics.html

I want to access my itunes library from my new laptop but need to authorise this computer and don't know how to do it?

I have a new laptop and want to access my itunes library but can't as I need to authorise this computer. Anyone know how to do that?

Press CTRL+B to enable the menu bar.
tt2

I tried to play a song. But it says I need to authorize my computer with a very old apple id I dont use anymore and I cant play the song. How do I fix this?

I am trying to play a song I bought and it is saying I need to authorize my computer to use it with a very old id that I no longer use for apple. How do I get all my music back?

You need to authorize the computer with that specific Apple ID. If that account's inaccessible, delete the song and then purchase it from your current Apple ID, or click here and ask the iTunes Store staff for assistance.
(110985)

I've bought a few songs recently and they played the first day but now it says that i need to Authorize my computer with is already authorized How can I fix this?

Ive bought a few songs recently and they played the first day but then when i go to play them again it say i need to Authorize the computer which is already authorized I don't understand can someone help me??

Hello there, HelpMePlease117.
There is a good Knowledge Base article that helps resolve authorization issues you might want to look over:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Any one of the steps listed there should help you get to the bottom of your issue and resolve it for you.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

You need to restart your computer/can't mount Macintosh HD

My problem is a bit of a complicated one and I have a lot of background info to explain, therefore I will try to go into great detail so please bear with me.
A couple of days ago I used Boot Camp to install Windows Vista on my Macbook. Everything was working fine and I used vista with no problems for a few days. Then yesterday I was playing a game in Vista and instead of manually quiting out of the game I took the lazy way out and just pressed the power button on my Mac which I had set in Vista to power down the computer. After a few second Vista shut down like it should have and the computer was off. I then pressed the power button again to turn on the computer. My startup disk at this point was Macintosh HD so I just let it boot up onto that volume.
And that's where the problems began. OS X booted BUT not all the way. It went past the startup chime, past the gray Apple, all the way to the blue screen with the rotating gear. But then it just stopped there. At first I thought the computer was just slow starting up because I shut down from Vista in a strange way but after a substantial amount of time of OS X not going past that point with the blue screen and rotating gear I decided to restart by pressing the power button for a few seconds and then pressing it again to start up. It went to the same place and hanged again. I did this 3 or 4 more times with no luck.
At this point, I consulted my Macbook manual and found out what to do if the computer doesn't start up. The best solution I could find by looking through pages 43 to 45 was to *zap the PRAM*. Simple enough, I restarted the computer and did the key combination and it restarted. Upon being restarted, it no longer went to the blue screen. No, no, not even close. It showed me the gray Apple logo and then after a second or two showed me the dreaded "You need to restart your computer" screen in four languages. No matter how many times I restarted and booted into OS X, it always showed that.
Now I have tried rezapping the PRAM probably ten times now and all it does is it shows me that as I have now learned "kernel panic" screen.
So I thought maybe I could repair the volume using Disk Utility on my OS X Installation DVD. So I did just that. I repaired the Macintosh HD volume. And that's when I noticed something strange. The Macintosh HD Volume was grayed out. I could still click on it and Disk Utility would still display options for what I could do with it but it was greyed out. It didn't take me long to find out that the volume was not mounted. I noticed this because my "Untitled" Windows Vista volume was not grayed out and had an "unmount" button. Again it didn't take me long to figure out that I should just click the mount button and my problems would be over. So I clicked and nothing happened. It just did something for a few seconds but didn't mount it. I don't know how many times I clicked on that **** button (out of frustration) but nothing happened.
And this is where I am now, with no idea about what I can do. My biggest worry is that I'll have to format the Macintosh HD and reinstall OS X but that's really my last, last resort because I have documents that are not backed up anywhere else and it would be a great hassle to restore them. If I was wiser I would have bought backup software for my Mac but I only bought it a month ago and went on an overseas trip in a very far away place a few days after buying it.
Anyway, it would be great if there was some sort of solution to fix this problem without wiping my volume clean. If there is none, and trust me, I'd try anything as long as I don't lose my files, then is there some sort of utility that can back up my volume onto a DVD or external hard-drive or something without booting up into OS X??
By the way, if this helps in any way: I have no problems booting up and using the Windows Vista volume.
Thanks in advance, and please help me.

Hello,
First of all thanks for the reply. The only problem is that I've already tried what you suggested. When I press the option key on the keyboard with the installation cd inserted I see what I am supposed to, the CD, Windows Vista and Macintosh HD. When I select Macintosh HD it does that same thing, goes to the "restart your computer" screen.
If I try to change the startup disk from the OS X Installation disk the only two volumes that show up are "Windows Vista on Untitled" and the "OS X Installation" disk, no Macintosh HD to even choose. I believe the reason for this is because Macintosh HD but as I have already said, it just can't be mounted.
I think the reason that Macintosh HD shows up when I press Option at startup is because Apple has hard-coded it in so that it's always there, no matter if you can actually access it or not depending on whether or not it's mounted.
Right now the best thing for me is to find out how to mount Macintosh HD, if it has to be done manually through Terminal I'll do it, I just need the syntax but something tells me if it doesn't work through GUI it probably won't work through command prompt.
Anyway, thanks for the reply. Let's hope we get something.

IBook keeps telling me i need to restart my computer!! please help!!!!

hi, i am a new member and a new mac user. i am experiencing some problems with my mac computer
computer specification:
iBook G4 (Late 2005)
1.5 GB DDR RAM
40 GB HDD
running Mac OS X 10.5.8
i just bought this computer and i didnt have any problems with it. but recently whenever i connect to the wireless a small black box appears to me saying that i need to restart my computer. its even written in many languages.
ive been searching a lot about it on the internet, and i found that its a problem called "kernel panic". i read that it is caused by a software or a hardware problem. but i dont have any bad software on it. i only have office 2008 and photoshop CS4.
i hope i can hear any good news about it as i just need to know the exact problem and how to fix it, knowing that if i took it to an apple store to fix it, it might cost a lot...
wael dimachkie

Please see my post on ´iBook Life Expectancy´. I would guess you have the same problem as me and many others. Unfortunately, I am no expert at identifying iBook problems other than having had problems of my own, but with similar symptoms.
http://macintoshhowto.com/hardware/how-do-i-get-my-broken-g4-ibook-fixed.html

I need to synchronize my computer

Similar Messages

Maybe you are looking for