I need to take tracks from a CD-R for new CD-R disks

Disk Utility says the disk is "read only" and when I insert it, it says "you have inserted a disk containing no volumne that Mac OS X can read"
I burned the disk with my school's CD burner, and NEED to edit the disk at home on my computer for some very important audition tapes. i need help fast.

What type of computer and OS is the school's system? And what software was used to burn the CD?

Similar Messages

  • I need to take elements from within 2 nested for loops and place them in an array at the specific row and column that I need.

    I have tried intializing an array and replacing elements by specifying a particular row, and column, but in the end I get an array with only one element replaced, and I suspect that it is because as the for loops are running through their iterations each time the array is re-initializing. I have a simple vi that I will post below, it is not the exact situation that I have but is a good place for me to get some understanding. I have the row and column indexes being driven by the inner and outer loop iterations, which gives me the pattern I need. I am using the inner iterations as array elements. How do I set this up so that it works and d
    oes keep re-initializing my array.
    Attachments:
    Untitled.vi ‏26 KB

    I have fixed a number of things in your vi.
    You were right in thinking that the array was continuously re-initialized. To avoid this, use a shift register (right-click the loop border), which will pass the updated array into the next iteration.
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    your_vi.vi.zip ‏13 KB

  • I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop. I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop. How do I do this?

    I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
    How do I do this?
    (when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)

    Just to add to what ChrisJ4203 said.  You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing.  However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
    If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before.  You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer). 
    After that you can sync your voice memos to your computer as mentioned earlier.
    If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy.

  • Is there a way to change the color of the Bezier Curves and points to a different color other than black  I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

    Is there a way to change the color of the Bezier Curves and points to a different color other than black  I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

    Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
    Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
    Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
    This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

  • My computer crashed and I need to transfer songs from my ipod to a new PC

    My computer crashed and I need to transfer songs from my ipod to my new computer. This seems harder than I thought. Does anyone know how to do this?

    here i gave this to the other guy who had the same probl.
    http://www.kennettnet.co.uk/software/podutil.php
    just click on trial

  • Hi, I need help!. I will change my iphone and I need to move contacts from one iPhone to the new, what should I do?

    Hi, I need help!. I will change my iphone and I need to move contacts from one iPhone to the new, what should I do?

    You should have been syncing your contact with your computer all along.  Just sync them from the computer to the new iphone.
    iPhone: Transferring information from your current iPhone to a new iPhone

  • How do i take songs from my ipod to my new computer

    How do i take songs from my ipod to my new computer?

    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.

  • I need safari 5 to update safari 4.02 for new email provider have leopard on a g5 powermac can only find 5.1 download for snow leopard

    i need safari 5 to update safari 4.02 for new email provider have leopard on a g5 powermac can only find 5.1 download for snow leopard is 5 still available

    Click here for it.
    (59866)

  • [beginner] I need to take data from 4  in Numbers '09 and combine info

    I need to take 4 cells of data that has name and address in column and combine all cell information into a single cell in address format so it can be copied and pasted onto labels.
    e.g. A1 cell: John A2 cell" smith A3 city A4 state A5 zip code
    how can i get all of that info to be:
    John Smith
    city, state, zip code
    if anyone has an idea. thanks!

    Adding to what Yvan posted, if you want the exact format you posted, with commas and a line feed, it would be this:
    A1&" "&A2&CHAR(10)&A3&", "&A4&", "&A5
    The CHAR function isn't supposed to take codes smaller than 32 but 10 works. It is a line feed.
    You may also want to reconsider the comma between the state and zip code as that is typically just a space.

  • I need to take music off my Iphone to download new oper. system. how do I do this?

    I need to take music off my I Phone to download new operating system. How do I do this?

    Hey smllygoblue,
    Thanks for the question. The following resource may provide a solution:
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Make sure your device has enough available space to install the update. Use iTunes to update if you don't have enough space, or remove content from your device. Tap Settings > General > Usage to see how much space your content uses.
    Thanks,
    Matt M.

  • I need to transfer settings from my Macbook to a new Macbook pro. what are the steps I need to follow?

    I need to transfer the settings (mail, safari, etc.) from my Macbook to a new Macbook pro. what are the steps I need to follow?

    Time Machine will sort that out, you got an external HD ?

  • HT1766 i got a new iPhone. i need to transfer data from my previous to the new

    I got a new iPhone. I need to transfer all of my data from my old to the new. How do I do that?

    Read http://support.apple.com/kb/HT2109

  • Need Help:Reading Data from RU payroll cluster for table GRREC

    Hi...
    I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 .
    Please let me know about the includes and the import and export statements to be used.
    Thanks in advance,
    RAVI.

    Hi,
    Here goes pseudocode
    Includes:
    include: rpppxd00    ,
                rpppxd10     ,
                rpc2cd09     , 
                rpc2rx02_ce , "if ldb pnp_ce is used else use the same include with out _ce
                rpc2rx29      ,  
                rpc2rx39      ,
                rpppxm00    ,
                rpc2ruu0_ce ,
    Declare:
    DATA : i_rgdir   LIKE pc261        OCCURS 0 WITH HEADER LINE     ,
               i_result  TYPE pay99_result OCCURS 0 WITH HEADER LINE ,
               i_grrec   LIKE  pc292           OCCURS 0 WITH HEADER LINE .
    start-of-selection:
    GET pernr.
    Get the RGDIR VALUE for the current PERNR & selected Molga
    get rgdir data TABLES i_rgdir
                          USING pernr-pernr
                                     p_molga " parameter
    CD-KEY-PERNR = PERNR-PERNR.
    RP-IMP-C2-CU.
    i_rgdir [] = rgdir[].
      LOOP AT i_rgdir WHERE fpbeg  LE  pn-endda
                        AND fpend  GE  pn-begda
                        AND srtza  EQ 'A'
                        AND void   NE   'V'.
      get_result_tabs   TABLES i_result
                                   USING 'RU'    "  US cluster
                                         pernr-pernr
                                         i_rgdir-seqnr
          RX-KEY-PERNR = PERNR-PERNR.
          UNPACK i_RGDIR-SEQNR TO RX-KEY-SEQNO.
          RP-IMP-C2-RU.
      i_grrec[] = i_result-inter-grrec[].
      LOOP AT i_grrec.
      case i_grrec.
      use wage types required here and pass the data to output table.
      endcase.
      endloop.
      endloop
    end-of-selction.

  • Need help loading tracks from compact disc

    I get my CD ejected on my powerbook when I insert some of my cd's to burn into my itunes folder. On my eMac I can load the songs fine. What gives? why does one computer eject the disc and the other will accept it and burn?

    What kind of disks? Pressed AudioCDs, DUAL-Disks or burned AudioCDs?
    Especially Dual-Disks will cause lots of problems when being used in slim line slot-it drives as those disks are not (completely) compatible to red book definitions.

  • Need to split data from one row into a new row redux

    Hi folks,
    I asked this question about eight months ago (see thread https://discussions.apple.com/message/23961353#23961353) and got an excellent response from forum regular Wayne Contello.  However, I need to perform this operation again and when I attempted it recently, I am now greeted with a yellow warning triangle.  Clicking it shows "This formula can’t reference its own cell, or depend on another formula that references this cell."
    What I'm trying to do is the following:
    I have an excel file that keeps track of members of a social group.  The file places each member "unit" on a single row.  The unit can be a single person or a couple.  Columns are labeled "First1" "Last1" "Hometown1" "B-day1" while the second member of the unit is identified in columns like "First2" "Last2" etc.
    What I'd like to do is duplicate those rows with two people (which I'll do by hand) but have a way of deleting the "xxxx2" data from one row and the "xxxx1" data from the duplicate row.
    Wayne's illustrated solution was to create a blank sheet and enter the following formula in cell A2:
    =OFFSET(Input Data::$A$2, INT((ROW()−2)÷2), COLUMN()−1+IF(MOD(ROW()−2, 2)=0, 0, 4)), which apparently worked fine for me last year but now is sending up an error flag.  When I look at the formula, there is no clue except that which I quoted above.
    Can anyone (or hopefully Wayne) take a second look at this and help me out?  I can't imagine that it's a problem with using the newer version of Numbers, but who knows?  I'm using version 3.2 (1861), which is the "new" Numbers.
    Any help would really be appreciated.
    Thanks!
    -Tod

    Hi Tod,
    The error message "This formula can’t reference its own cell, or depend on another formula that references this cell." may be because your table may be different from the one you were using for Wayne's solution. Numbers has Header Rows, Footer Rows and Header Columns. Such Headers in tables exclude themselves from formulas. Excel does not recognise them as headers. What table are you using now?
    A screen shot of (the top left portion of) your table or a description of what you see under Menu > Table will help.
    Regards,
    Ian.

Maybe you are looking for

  • File size of corrected jpegs expands to half the size of the original

    Using a Canon 1Dx, I have an option of utilizing both slots and assigning different file types to each.  In one slot I shoot RAW, and on the 2nd slot I shoot a JPG backup.  Typically though I'll do all my work on the RAW file in Lightroom 5.  The uni

  • Sharing my Internet Connection

    I have a MacBook and have a connected a USB modem. I have shared the interject connection via airport. I have then been able connect to the shared Internet using my iPad. When I attempt to connect to the same shared connection using my iMac, I get a

  • Packaging Material and Handling Unit Issue

    Dear All, Context:       VL02N Outbound delivery (& packing) I have 2 packaging material 1.box 2.carton Finish product  a,b,c,d  etc I want to put multiple finish product in a box then I want to put 3box in a carton. I have VERP Packaging maerial  00

  • How can (parse) i use XML file with missing EndTag

    hi, i have an application which writes an "XML file". another application should read that XML file, build an DOM and access the nodes with xpath. my problem. if the first application is not finished there are tags missing. e.g. </xml>. but the secon

  • How to invoke javafx from java code

    hi all, i'm trying to invoke my .fx class from java class, but getting exception. Exception thrown in JavaFX pretty printing: java.io.FileNotFoundException: \tmp\___FX_SCRIPT___.fxdump from StringInputBuffer (The system cannot find the path specified