I need to time using timer control?

hi friends,
any body help me,i need to time using timer control?
regards
welcanv

Hi,
Check this example.
http://blog.flexexamples.com/2007/08/14/creating-a-simple-timer-in-flex-with-the-flashutil stimer-class/
also check the documentation on Timer class
http://livedocs.adobe.com/flex/3/html/help.html?content=08_Dates_and_times_4.html

Similar Messages

Time controlled Loop faster than 1ms

HI
I work with Labview 8.2.1.
I need a time controlled loop who is faster than 1ms. I tried to use the 1MHZ time source (see picture) but the loop does not work with this.
Please help
Message Edited by SteffenGrab on 11-30-2007 01:13 PM
Message Edited by SteffenGrab on 11-30-2007 01:17 PM
Attachments:
Time loop.JPG ‏66 KB

There is no picture to see...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Time Controlled Loop?

I am building an application that scrolls through an panoraminc photo to make it appear as if its rotating 360 degrees.
So far i can get the image to scroll left and right continously by having a left and right button to click on
what i am after is some ideas/direction on how i could automate the process, as in when you click the left button the image will scroll at a certain speed.
I was thinking that i would need a time controlled loop where the the method for scrolling the image to the left occurs every few seconds.
Thanks in advanced

Use a inner class that extends Thread as follow:
class MyTimer extends Thread{
boolean continue=true;
public void stopScroll(){
continue=false;
public void run(){
while(continue){
try{
xpos=pictureScroll(img, xpos, "right");
sleep(100);
}catch(InterrupdedException e){
}use
Thread t=new MyTimer ();
t.start();to start scroll, and to stop
t.stopScroll();in button's ActionPerformed

How to use database control to execute sql queries which change at run time

Hi all,
I need to execute sql queries using database controls , where the sql changes
at run time
based on some condition. For eg. based on the condition , I can add some where
condition.
Eg. sql = select id,name from emp where id = ?.
based on some condition , I can add the following condition .
and location = ?.
Have anybody had this kind of situation.
thanks,
sathish

From the perspective of the database control, you've got two options:
1) use the sql: keyword to do parameter substitution. Your observation
about {foo} style sbustitution is correct -- this is like using a
PreparedStatement. To do substitution into the rest of the SQL
statement, you can use the {sql: foo} substitution syntax which was
undocumented in GA but is documented in SP2. Then, you can build up
the filter clause String yourself in a JPF / JWS / etc and pass it into
the DB control.
For example:
* @jc:sql statement="select * from product {sql: filter}"
public Product[] getProducts(String filter) throws SQLException;
This will substitute the String filter directly into the statement that
is executed. The filter string could be null, "", "WHERE ID=12345", etc.
2) you can use the DatabaseFilter object to build up a set of custom
sorts and filters and pass that object into the DB control method.
There have been other posts here about doing this, look for the subject
"DatabaseFilter example".
Hope that helps...
Eddie
Dan Hayes wrote:
"Sathish Venkatesan" <[email protected]> wrote:
Hi Maruthi,
The parameter substituion , I guess is used like setting the values for
prepared
statements.
What I'm trying to do , is change the sql at run time based on some condition.
For example ,
consider the following query :
select col1,col2 from table t where t.col3 > 1
At run time , based on some condition , I need to add one more and condition.
i.e. select col1,col2 from table t where t.col3 > 1 and t.col4 < 10.
This MAY not address your issue but if you are trying to add "optional" parameters
you may try including ALL the possible parameters in the SQL but send in null
for those params that you don't want to filter on in any particular case. Then,
if you word your query
as follows:
select col1, col2 from table t where t.col3 > 1 and (t.col4 = {col4param} or
{col4param} is null) and (t.col5 = {col5param} or {col5param} is null) ...
you will get "dynamic" filters. In other words, col4 and col5 will only be
filtered if you send in non-null parameters for those arguments.
I have not tried this in a WL Workshop database control but I've used
this strategy dozens of times in stored procedures or jdbc prepared statements.
Good luck,
Dan

U of Dallas Media says they need me to use IE. But IE is 10 times slower.Can't Firefox masquerade IE?

U of Dallas Media says they need me to use IE. But IE is 10 times slower.Can't Firefox masquerade IE?
== URL of affected sites ==
http://www.udallas.edu/academics/ministry/online/olmasters

You can use this extension to fool that website into thinking you are using IE, but that extension isn't going to fix anything that needs IE-only functionality, like ActiveX controls.
https://addons.mozilla.org/en-US/firefox/addon/59/

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

I need a timer function to ping the server every 5 secs??using threads.

I need a timer function to ping the server every 5 secs??
using threads...i have to use a thread coz i cant use Timer and Timer Task coz clients r on the JDK1.2 version.I have created a thread which keeps checking th ping msg & any server msg is pings 4 the1st time properly but then it just waits to read the response from server but it doesnt but the server shows that it has send the msgs to client???PLEASE HELP URGENT

Few things are not clear from your post, like, are you using sockets and if you are, how are u reading writing to them (ur sample code would help)...
Anyways if you are, are you doing accept on your socket in a while(true) loop or just once... If you do it only once you will get the first ping message but none afterwards if the other side closes and opens new sockets for every send... What I am suggesting is something like the following:
ss = new ServerSocket(port);
while(true)
     s = ss.accept();
     is = s.getInputStream();
     os = s.getOutputStream();
     reader = new BufferedReader(new InputStreamReader(is));
     writer = new BufferedWriter(new OutputStreamWriter(os));
     String in = reader.readLine();
        // do something with this string
        s.close();
        // put some check here to break out of this infinite loop
}// end of While

SharePoint 2013 RSS Viewer not loading when other Custom web part using Update Panel or Ajax Timer control

Hi,
SharePoint 2013 RSS
Viewer web part failing to complete loading when the page loads.
This happens when having RSS Viewer and then adding a Custom webpart with an updatepanel and timer control.
I had used Ajax update panel and timer control to load the web part asynchronously after the main page is fully loaded.
The RSS-Viewer web part hangs in loading state while the custom webpart loads just fine.
The issue occurs when an like button click or Timer Tick event fires after the page
is loaded.
Haven't been able to track the issue.
Couple of workaround I tried to call a server side button click event from the custom web part after the page gets fully loaded using JQuery shown below did not work out either.
$(document).ready(function () {
$('#<%= netButton2.ClientID %>').click();
And
document.onreadystatechange = function () {
if (document.readyState == "complete") {
$('#<%= netButton2.ClientID %>').click();
Please let me know how to resolve this issue.
Thanks,
Franklin

Hi Johan,
The assignment of this user on the given task might be corrupted. Try to remove the resource from the task, publish the project, assign the resource again and publish again the project. If it is not working, try to unpublish the task (column "publish")
and publih it again.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Using Numbers, I need to time-stamp each line in a table for when it was entered

I need to time-stamp each line in a table for when it was entered.
I have a formula which is
"=IF(F18="","",NOW())"
it gives me the answer I want, but every time I edit any data in the formula is recalculates the date/time to reflect the most recent edit. I do not want to do this. I am open to any and all solutions including using a script. I do not really know anything about scripts except that they are really easy to use once it's written.
I have a formula i use in excel but it requires circular references in excel. I tried using this formula in numbers but I get the error that says I cannot reference a cell that references back to the cell i’m inputting the formula into (circular reference. It is easy to use in excel just by limiting the # of iterations in preferences. I can’t seem to find any such preference in numbers. Do you know of one? here is the formula:
"=IF(D4=”",”",IF(B4=”",NOW(),B4))"
I use it to time stamp each line in a spreadsheet. It is the only way to keep all the previous line from recalculating everytime I add a new line. If I can’t use this formula, do you know of a way to timestamp each line without having it update everytime I add a line or edit the form?
Thanks in advance- I know this isn’t exaclty an easy question but I have honestly looked everywhere
emely

Hi Emely,
Check the Insert menu:
The highlighted item is slightly misnamed, requiring a bit more than a simple selection (or keypress combination*) to act as a time stamp.
Simply choosing the menu item willproduce the result shown in A2: A time and date value is entered, but only the Date part is displayed.
Setting the cell format to Date and Time, with both parts displayed (as I've done in column B) does show both parts of the Date and Time value, but as you can see, the time part is set to midnight, as it is in any cell where you have entered only the Date part of a Date and Time value. The date was entered here in the same manner as in A3.
To enter both the current Date and current Time, the process has a few more steps:
Select the cell
Go Insert > Date & Time
Before confirming the entry, double-click the cell (now showing the Date) to open this small dialogue:
Click the pop-up menu under Choose Date format:
Choose the last item in the list.
Results as shown in A4 and B4 of the table above.
Regards,
Barry
•Regarding the KB shortcut shown: The Mac OS lets you define a KB shortcut for any top-level menu item. The one in the menu is a user-defined keypress combination, made to be easily remembered, not to be physically convenient to use. If doing your own, you may want to try for something eassier to get your fingers on.

Using multiple charts but one time control

I would like to place two charts on the same web page. One above the other. The top chart will have the time refresh control on it while the other should be controlled by the first chart. I have recently taken two charts and controlled each of them by using an iBrowser. How do I get the time features to sync up with the other chart?

In chart #2, turn off the "Show Time Control" checkbox in the display template.
In the update event from chart 1, set the startdate/enddate of chart 2 to the startdate/enddate of chart 1, and call the updateChart(true) method of chart 2.
Pseudocode (might be a few typos):
chart2.getQueryTemplate().setStartDate(chart1.getQueryTemplate().getStartDate());
chart2.getQueryTemplate().setEndDate(chart1.getQueryTemplate().getEndDate());
chart2.updateChart(true);
Best regards,
Rick

I need to make a stop start animation using iMovie. I need the time factor to be 0.03. Every time I make an adjustment it goes to 0.1s which is too slow. Does anyone have a suggestions?

I need to make a stop start animation using iMovie. I need the time factor to be 0.03. Every time I make an adjustment it goes to 0.1s which is too slow. Does anyone have a suggestions?

First, for Stop Motion Animation, there are better tools. These include iStopMotion and QuickTIme Pro Version 7.
If you want to do it in iMovie, it is possible, but slow.
First, go into iMovie Preferences, and make sure you check "Display Time as hh:mm:ss:frames". This will let you edit to the frame lever rather than to the nearest 10th of a second.
Second, see this Tutorial by Jon Walker on how to edit down to a single frame in a still image sequence.
You can modify his technique to get 2 or three frames.

(261718088) Q ADVC-4 Can Timer Control/Polling be used to interact with webservices developed outside of WLS?

Q<ADVC-4> Can Timer Control/Polling be used to interact with webservices developed
outside of WLS?
A<ADVC-4> Absolutely, Timer mechanisms are the appropriate way to make your web
service a client to another web service and are very useful to provide polling
mechanisms. Look at slides ADVC 9-11 to see more.

Step by step, how did you arrive at seeing this agreement?

Using timer control

I want to schedule my web service to run it from Monday to friday and each day it should run from 10:00 am till 3:00 pm

Add a timer control to your screen and set its Repeat property to true so it will keep looping and trigger refresh of your label. Now add a label control and set its Text property to: Text(Now(),"hh:mm:ss am/pm") & Text(Timer1!Value-Timer1!Value,"#").
The Text formatted call to Now() causes the label to display the current time. The second expression displays blank--subtracting the timer's value from itself returns 0, and the formatting returns blank. You need this second expression to make the label's
output be dependent on the timer so it keeps refreshing with each tick. I hope that helps.
Thanks
Robin

HT204380 do you need wireless to use face time?

Do you need wireless to use facetime?

I was thinking that I could use the usb connection. Is this possible?
No
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Why do I need Quick time 7 and Quicktime 10 ?

I have just migrated from iMac5 (2.16 GHz) Mac OS 10.4.11 Quicktime 7.6.4 to a new imac 3.06 Mac OS 10.6.2 Quicktime 10.0.
Some of my quicktime files play ok but others prompt me to download quicktime version 7. Why do I need to do this ? (There seem to be a lot of problems with this looking at the forums). All the files play on the old mac. Why isn't Quicktime forward compatible or why is there no import facility so that you can make your old files compatible ?
Or am I missing something ?

Some of my quicktime files play ok but others prompt me to download quicktime version 7. Why do I need to do this ?
Because your system thinks you are missing specific codecs required for the playback of certain compression formats. In some cases this may be an installation problem in which the codec was "lost" or "orphaned" during the update process. In others it may be a need to update the component to work properly under the dual QT X/7 framework installed under the Snow Leopard OS. You need to check the Inspector/Finder Info or similar window to determine what specific codec is causing the problem and then re-install or update that specific codec/component/package.
(There seem to be a lot of problems with this looking at the forums).
Most of the problems are "self-inflicted" by individuals who, rather than studying the problem symptoms, analyzing them to determine their cause, and then fixing the problems, elect to immediately delete and re-install software -- often attempting to mix components from different operating systems and/or update versions of the software in their haste.
All the files play on the old mac. Why isn't Quicktime forward compatible or why is there no import facility so that you can make your old files compatible?
I am running both Leopard and Snow Leopard variations of QT v7.6.6 and all of my "old" files have remained compatible -- to include MPEG-2 video and a limited number of third-party supported compression formats. Since my configurations continue to work properly, my first guess is that you have an unresolved configuration problem or inability for your QT X 64-bit routines to communicate/switch properly with the 32-bit routines as required for your content.
Why do I need Quick time 7 and Quicktime 10?
Technically, you probably don't. However, as an old QT 7 Pro user who likes many of the QT 7 Player controls/options/features better than QT X's new but more basic features, I maintain both in active service and tend to use QT 7 as the default player of most of my work flows. Still, this is up to the individual. I am in no hurry to rush the changeover from an older but still more reliable QT technology to a more modern, but as yet, less mature and well tested "new" QT technology. In short, I feel it best to make the most of both dispensations during the development of this "new" version of QT.

I need to time using timer control?

Similar Messages

Maybe you are looking for