I need to UNINSTALL the latest upgrade to Mozilla as I cannot locate in my hotmail e-mail a "Subject" line nor an "Attachment" link !!!!!!!
When it comes to replying or forwarding an e-mail on my hotmail a/c, the newly installed Mozilla/Firefox program does not provide any method for me to insert a "subject" nor to include an "attachment" to the e-mail.
This is a complete and utter disaster!
Please advise me soonest how to uninstall the newly installed Mozilla/Firefox.
If possible to expedite the requested solution (Uninstall), please call me at (Phone number removed by mod); or e-mail me at (email removed by mod)
First, you need to update to Firefox 17.0.1, as the version you are using (Firefox 3.6.3) is not only known to be buggy with many websites, but it is VERY Insecure. So, please update IMMEDIATELY before you do anything else. https://support.mozilla.org/en-US/kb/update-firefox-latest-version
Then, AFTER updating (It's critically important that you update), read https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently
Similar Messages
-
Mac Desktop.processor 2.7 , intel core 17 . 16gh . Created apple album .Tried to purchase but will not me complete as do not have a zip code as my country is Canada.Tried to change country but unable to do .Everthing else seems to have correct Country (itunes/photos/apple store ) .What is the correct pathway to change Country for the Apple Album ?
Thank you .Now I have created album , Changed to correct Country mode , through checkout and started upload to apple store ! Will NOT complete this very last task .Called service provider for wireless internet (only service available in rural NS . Eastlink .ca ) . Service teck says they cannot make it faster .Tried twice again . Is their some way I could load the Apple Album on a transport/ USB stick to take to town where a friend has "real " high speed .? Thank u in advance .
-
How do I send my photos on my iPhone 3, which has the latest upgrade, to iCloud? I cannot find an option.
You can only view your photo stream photos from a device or computer that is signed into your account with photo stream enabled, not from icloud.com. If you backed up your phone, the camera roll photos on your phone would be included in the backup, but cannot be seen unless you restore the backup to your phone.
However, you shouldn't try to use iCloud to back up your photos. Photo stream photos only remain in iCoud for 30 days. And if you back up yoru phone to iCloud, then delete your photos, you next backup will overwrite the backup that contains the photos you deleted and they would be lost.
To back up your photos, import them to your computer using your usb cable as explained here: http://support.apple.com/kb/HT4083. -
I need to get the latest version of Adobe Reader. Is this still free? How can I receive automatic upgrades?
Of course the free Reader is still available: http://get.adobe.com/reader/
To get automatic updates set the Updater in the Reader Preferences. -
My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
the latest upgrade is not compatible and is not allowing me to open firefox. the error message says run error platform 17.0.1 is not compatible with min version >17.0 max version <17.0
hello paisley157, this error might be caused by security programs such as zone alarm - please temporarily disable those programs for the following procedure:
*download the full firefox setup file from getfirefox.com
*uninstall firefox on the machine (but don't chose to delete your custom files & settings in the uninstaller!)
*manually delete all remaining files in the firefox program folder, which usually resides in ''C:\Program Files (x86)\Mozilla Firefox\''
*reinstall firefox -
My iPod touch shows up as a apple iPod camera but if i dont want to download the pics and press cancel it all dissappears. my ipod has been lost for 3 months and has not got the latest upgrade.
Try:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Otherwise wee need more informatin. -
I tried to download the latest upgrade and I got a message telling me "The application or DLL ProgramFiles/CommonFiles/Apple/Applie Application Support\ApplePushService.dll is not a valid Windows image. Please check this against your installation diskette." and then below that another message "iTunes was no installed correctly. Please reinstall iTunes. Error 7 (Windows error 193). I tried reinstalling and it still will not work.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I am trying to synch my husband's I Phone and cannot. i have already done mine, which is identical to his. When I try to synch his, I get the message that i need to download the latest version of i tunes, which i have done. Each time i try to synch, it tells me the same thing. I have downloaded Itunes 10 to bvoth teh phone and to my PC. Help!
When I try to synch his, I get the message that i need to download the latest version of i tunes, which i have done. Each time i try to synch, it tells me the same thing.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Just installed the latest upgrade for iTunes. Cannot open iTunes store?
Just installed the latest upgrade for iTunes. Cannot open iTunes store?
Hey there Ray Neilson,
It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues in Windows
If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
Update iTunes to the latest version.
If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
Try the steps to troubleshoot iTunes Store connectivity in Windows.
As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
If you're receiving a specific error message, follow these steps.
If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
Drag the original hosts file to your desktop.
Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
When Notepad opens, choose Edit > Select All.
Choose Edit > Delete.
Choose File > Save.
Close Notepad.
Right-click the duplicate file, and choose Rename.
Type "hosts" (without quotation marks) and press Enter.
Restart your computer and try connecting to the iTunes Store.
If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
If the issue persists, try the troubleshooting in this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Morning, need to download the latest ios for my ipad...
Morning, need to download the latest ios for my ipad..
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Where can I find the latest upgrades for Crystal Reports 2008
Hello all
My question is rather simple, I need to know. Where can I find the latest upgrades for:
1) Crystal Reports 2008 Merge Modules
2) Crystal Reports 2008 Runtimes.
Are they incremental upgrades ????
Thanks in advance..
ADrián.-Downloads page is here:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
[This|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs] wiki tracks latest SPs and FPs with download links.
[This|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki has links to runtime (I believe I have not updated this for FP 2.5 yet, but the downloads page has these)
And yes, they are incremental.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
I need help uninstalling the recent download I did of Adobe Flash Player.
I recently installed the newest update for Adobe Flash Player for my computer, but by doing so it no longer works for anything that I do.
I saw in the help that there is a way to uninstall the latest version and download an older version of it. Reading the instructions and then doing them is difficult for me, especially when it involves something as intense as this.
I was wondering if there was a way that I could get the instructions given to me verbally by a representative, say, over the phone. Because my biggest fear I'm having right now is that by doing it myself, I'm going to screw up royally and just make things even worse than they already are.
If this is possible in any way, shape, or form, that would be awesome and make me feel 1,000,000 times better. This has been an issue I've been having with my computer for a week and a half now, and I would REALLY like to rectify it and make it better.
Please, and thank you.
-JessieThis is a user forum; we are not doing phone support.
However, we can give you step-by-step instructions here at the forum, and we can make it as detailed as you wish.
First we need to know
what is your operating system?
what is your browser?
what Flash Player version do you want to install? -
I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.
I'm with Jim on this. It always seems to work out better if you do not install over another version. You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
Once that's done, install your newly purchased version.
-DH -
Uninstalling the latest security updates?
I'm having a lot problems with my built-in iSight on BOTH of my iMacs. Is it possible to uninstall the latest update? If so, how?
Thanks for your help.
PatrickOnly by doing an Archive and Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
Maybe you are looking for
-
How to install RDP CALs pack on Windows Server 2012 R2 (member of NT domain)
OS: Windows Server 2012R2 (64-bit), member of NT (Samba 3) domain. Task: install RDP CAL pack, to allow connecting above its default 3 sessions limit. Problem: when setting up RDP licensing/other required service, I came to a problem: RDP access brok
-
Hi Expert's! I am looking for a BAPI to clearing a Vendor in F-44 transaction. This BAPI must to do a compensation of expenses in Credit Card. Someone can Help me?
-
Add Data Channel Headings to Output File
I have seen several threads discussing how to get names on the column headers when outputting dynamic data to a file and thought I would give a simple example of how to do this. The example generates a Y=2X as 2 data flows and sends them to an X-Y gr
-
Solaris 7 on Toshiba 8100 notebook ?
Hi, Has anyone has the experience of installing solaris 7 on Toshiba 8100 laptop? or knows anywhere can download the driver for that model? My problem is solaris always say unknow monitor type when installing and I can not find the monitor type from
-
Integration with solution manager 4.0 - service desk with XI ?
Hello Experts, Does any one know how to integrate the solution manager 4.0 - service desk with SAP XI. I read the solution manager 4.0 service desk web service api, but it only has the XSDs. If any one can provide me any step by step procedure f