I need to upadate from mac system 10.6.6 to 10.6. 8 so I can load indesign 6indesign cs6

I need to upadate from mac system 10.6.6 to 10.6. 8 so I can load indesign 6indesign cs6
is it a free upload
do i need to back up files
if not free how much
Malvinn

Malvinn
Backups are not just for when updating your system. Hard disks fail. Disasters happen. You should be backing up your data, or ideally your entire system, regularly. If you haven't got one already get a large external hard disk, Firewire or Thunderbolt capable, and download a copy of Carbon Copy Cloner to make a clone (so that you can boot from it if necessary) of your system. Run CCC at least monthly, and every time before updating software, and daily if you change data that you can't afford to lose daily.

Similar Messages

  • I need to upgrade from Mac OS x 10.6 8 what is the next step?

    I need to upgrade from Mac OS x 10.6 8 what is the next step?

    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
                 Identifier 5,1 or later.
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
             7. Xserve (Early 2009) - Model Identifier 3,1 or later.
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • I need to update from Mac OS 10.4.11 to Snow Leopard

    I need to update from Mac OS 10.4.11 to Snow Leopard, do I just buy Snow Leopard???

    Yes! If your Mac meets the requirements:
    Requirements for OS X 10.6 'Snow Leopard'
    http://www.apple.com/macosx/specs.html

  • HT1338 I did not obtain the free Snow Leopard DVD when it was offered and now need to update from MAC OS X version 10.5.8.  What steps do I need to take?

    I need help updating from Mac OS X 10.5.8 to iOS6.

    Phone the online Apple Store and order it.
    (70966)

  • Upgrade from Mobileme to iCloud - do I need to change from Mac OS X 10.6.8?

    Do I need to change from mac os x 10.6.8 to upgrade from Mobileme to iCloud?
    Please advise
    Is OS X Lion different? latest version?
    Thanks in anticipation

    rugbytom wrote:
    Does that mean though that I have to change to the Lion, despite its shortcomings, in order for iCloud to work and not lose the current beneifts of synchronisation I have with Mobileme
    Basically, yes.
    You can migrate your MobileMe account to iCloud at http://me.com/move even with Snow Leopard - when asked to confirm that you have Lion on your Mac, just lie and say 'yes'.
    If you have MobileMe mail set up to collect mail from external POP accounts you should cancel this before migrating, or you may find it still working in iCloud (where it isn't supposed to) and with no way of stopping it. You may find the MobileMe email settings will continue to work for a time after migrating but it will stop eventually so you should not rely on this. You should delete your MobileMe email account from Mail.
    You can then set up Mail manually in Snow Leopard to access iCloud email; it's a slight fudge because the 'wizard' will attempt to connect you to MobileMe as soon as you enter an @me.com address. The process, which includes a workaround for this, is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    You may be able to sync your calendars to iCloud by means of an unsupported hack, but you cannot sync Contacts or Bookmarks and iCloud's other facilities will not work. This page outlines the situation when you migrate to iCloud, including a link to the calendar hack:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    To get the full functions of iCloud you need Lion 10.7.2

  • HT1338 What software do I need to get from Mac OS X 10.5.8 to the newest available software?

    What software do I need to get from Mac OS X 10.5.8 to the newest available software?

    OS X Lion Technical Specifications
    http://www.apple.com/macosx/specs.html
    Installing Lion: Our complete guide
    http://www.macworld.com/article/161064/2011/07/installing_lion_complete_guide.ht ml
    How to install Lion over Leopard
    http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
    OS X Lion: Installation Guide, Boot Discs and Q&A
    http://www.macstories.net/mac/os-x-lion-installation-guide-boot-discs-and-qa/
     Cheers, Tom

  • HT204053 Hi! i need to transfer from mac iCloud contacts info to galaxy note3. how do i do it? Thanks

    Hi! i need to transfer from mac iCloud contacts info to galaxy note3. how do i do it? Thanks

    If the Galaxy allows importing from vCards files....
    You can export your contacts - go to the Contacts page at icloud.com (use computer's browser), click the top contact to select it then shift-click the bottom one to select all. Click the cogwheel icon at bottom left and choose 'Export vCard'.

  • HP Laserjet 6MP: what do I need to save from old system?

    I recently moved from a G3 iMac running 10.2 to a G5 running 10.4. I have a great old HP Laserjet 6MP. Right now, my system is successfully printing (through an AsanteTalk box that goes from the printer to the Appletalk slot). It was able to find my printer, showing the name "Buster," a name which I had chosen a long time ago when I was on System 9. The only place where the name "Buster" appears in my files is on two ppd files on my external nonbootable backup disk, in the old "System Folder." One is in the Printer Preferences and the other in the Extensions in this old System Folder. I have several questions:
    1. Are these two files named Buster essential to my system being able to find my printer? I'm surprised that the system would have found the printer in the backup disk rather than through a newer driver on the current system.
    2. If the Buster files are essential, where should I put them on my current system? (I'd like to be able to remove the old system files from the external backup drive eventually.) Or do I just need to keep them where they are, on the backup disk?
    3. I've noticed there is an HP Laserjet 6MP driver on the new system. Would my system be able to find my printer with just this driver?
    4. Is there any danger of my system not being able to find the printer if I move these "Buster" ppds to a different folder on the backup disk?
    Thanks,
    Donna
    Message was edited by: Donna Kossy
    Message was edited by: Donna Kossy

    You should be able to use the printer independent of old system
    folders created in another computer at a different time. Perhaps
    the AppleTalk connection is why this old information comes up;
    presumably you are still using the printer via AppleTalk, and so
    that configuration must be running under Classic in OS X 10.4.
    The OS X 10.4.x Tiger system probably has excellent drivers;
    but you could use Gimp prints, too.
    Did you use the Migration Assistant to move from the old Mac
    to the newer one? If so, it copied over stuff; and any old alias
    or links to sources no longer available to the computer would
    be null and void, unless or until some other drive with old info
    relative to this were available.
    I'd change all that; and re-think the need to use AppleTalk,
    unless you have other hardware or needs only fulfilled with it.
    You should be able to get a good driver for the printer as a
    download, something newer than the printer's old one. The
    Gimp Print or gutenprint open source page has free drivers.
    There probably is something there to update the old printer.
    You may be able to move the printer driver from one system
    into another; but not sure how compatible that bit of old data
    would be in a newer OS X 10.4 system.
    Gutenprint - Gimp print:
    http://gimp-print.sourceforge.net/MacOSX.php3
    Gutenprint supported printers lists your model:
    http://gutenprint.sourceforge.net/pSupportedPrinters.php3
    I'm not sure about the rest of this question; in that the need
    for the configuration as it was has not been established as
    a single and valid way to go. You should be able to get newer
    drivers and consider other means to use the printer outside
    of AppleTalk, if necessary. There should be no need for the
    old system parts, if you can get a newer, better driver; etc.
    Good luck & happy computing!

  • Isync will not login with new mobile me, need to change from .mac

    I have been trying to sync but my old .mac user name and password are not working now with mobile me. Shows that login is valid but I get an error message - There was a problem with the sync operation. .Mac login failed. I assume that I need to change the login address from .mac to a mobile me address. Any ideas out there? Apple has nothing on this problem.

    Patience. MobileMe is a mess.
    When Apple substantially modified .Mac Sync to support extended attributes available with the introduction of Mac OS X 10.5, and simultaneously dropped support for for the most part for Mac OS X 10.3.9, it was three weeks until normal service was restored. And even then, most of the issues individual users had with .Mac sync prior to the transition were still present.
    If you value your data, back it up and wait for an announcement from Apple that it works as expected.

  • I need to update from Mac OS X 10.5.8 to 10.7

    I need to update my software. I bought a new Iphone5 and need itunes 7, but need to update software before I can do that. Is it possible to jump from Leopard to to Lion?

    No; you need to be running Mac OS X 10.6.6 or newer to install Lion. Since iTunes 10.7 requires 10.6.8 and that's also a free download for people running Mac OS X 10.6, get a Mac OS X 10.6 DVD from the online Apple Store, and unless you have another reason to upgrade the computer's OS past 10.6.8, don't bother.
    (71979)

  • I need to upgrade from Mac OS Xv 10.0.4 to a higher OS X but need help!!!

    Need to know if there a Mac OS Xv 10.0.5 or anything that will upgrade from Mac OS Xv 10.0.4.
    How can I keep Mac OS 9 & upgrade Mac OS X?
    Please let me know?
    Please tell me as soon as you done reading this post.
    Thank You!

    Mac OS X 10.0.4 was the last update for the 10.0 (Cheetah) release. There was a free update to 10.1 (Puma), but that was distributed via CD at the time, for the "early adopters" who bravely installed Mac OS X 10.0, and that can get you up to 10.1.5 with additional downloadable updaters. But I do not think the 10.1 update it is available as a free download, so you cannot go beyond 10.0.4 without obtaining a Mac OS X installer disk for a higher release.
    How can I keep Mac OS 9 & upgrade Mac OS X?
    Unless you intentionally select the "erase and install" option in the Mac OS X installer, your previous data (including a Mac OS 9 installation) should be retained on the drive.

  • I need to upgrade from Mac OS X 10.6.8... what's my next best option?

    Can, and should I, upgrade from Mac OS X 10.6.8 to OS X 10.7.5... I've never bought anything through the Apple store but they don't appear to be helpful in providing guidance. Thank you.

    You could check to see the details in Mac OS X Support page;
    http://www.apple.com/support/osx/
    Also there is this page where upgrade paths are mentioned...
    http://www.apple.com/support/osx/upgrade/
    Some people find issues with Mavericks 10.9.x in their older
    Macs which were not exactly built with it in mind. So be
    sure to have a backup plan where you could go back, first.
    A tested-bootable clone on suitable external HDD is a good bet.
    There have been some issue with third-party driver or other
    support to make older hardware work in 10.9.2. Also some
    older applications that ran fine in OS X 10.6.8 may not later.
    Good luck & happy computing!

  • Need Help moving from mac to Windows

    I did search the forum, but could not find it, so I thought I will ask.
    I have to move from PowerBook to a Windows XP machine. (I see lots of threads moving from mac to windows but not otherway around).
    How do I move the iTunes music. I want to keep the ratings, don't want to redo the ratings for 1000+ songs.
    If it was previously asked and answered, please point me towards that thread.

    Folks,
    Sorry for the redundant post. I had problem doing this, and was able to make it work. The trick was renaming the file iTunes Library to iTunes Library.itl (with the extension).
    Once I did that, it works well.
    Thanks

  • TS3276 Unable to print e-mail messages from Mac book pro directly to my HP ink jet printer.  Can print from Word, Excel, Safari.  E-mail messages only print the date and "sent to" name.

    Unable to print e-mail messages from my Mac book pro directly to my HP ink jet printer.  Can print from Word, Excel, Safari.  E-mail messages only print the date And "sent to" name, the remainder is blank.

    If you haven't done so already, try resetting the printing system.
    Reset Printing System

  • New to mac need help on cleaning mac system

    Hello guys i am new to the mac i got it yesterday and i am so use to a pc...so i have some questions
    i want to know how i can clean my mac? (the system not the outside)
    how to clean out the internet history etc.( i know on my pc i had these one click apps. that i just open and it would clean my computer out such as the internet history, Cookies etc. and it would clean up left over files that are left from software that i have uninstall is there a software like that for the mac?
    oh this is the new macBook pro the 09 and its the 13inc. 4gb
    Thanks

    Hello Candy:
    Welcome to Apple discussions.
    A Mac running OS X needs no "cleaning." For example, OS X "defrags" files of less than 20 MB on the fly. Routine cache cleaning, etc, is done in the background as long as your computer is either on or sleeping. Let your Macbook Pro sleep so that the background tasks will run once you wake it up.
    _DO NOT_ trash system files or indiscriminately clear cache files (that will make the Mac run slower).
    At the risk of being pedantic, do not worry about maintenance tasks for a Mac running OS X.
    Barry

Maybe you are looking for

  • How To Update NVIDIA Driver In MacBook Pro 2013

    Hello, I have A MacBook Pro Retina 2013. As it have a GT 650M 1GB so I nned to update my Driver as its pretty old. But when I go to NVIDIA Driver Website there is no option to download Driver for Mac OS. As I am new to MacBook So I don't know how to

  • Define back ground job for Maintenance Order Settlement through KO8G

    Hi Experts, I need to define back ground job for Maintenance Order Settlement through KO8G transaction code. Here are the requirements 1. The job should run on weekly basis automatically. 2. The settlement period and posting period should be taken ca

  • DUMP CALL SUBSCREEN subscreen INCLUDING 'SAPLSZA1' '0300'

    Hi everybody. I've a problem  when I work with xk03. System throw a dump with a message like that. *The system attempted to use dynpro 0000 in program "SAPLSZA1".* *This dynpro does not exist.* when i create a vendor with customer dates I  see that t

  • Repairing database does not find missing folders stored in Library

    Has anyone successfully found a way to manipulate the iPhoto database to restore images that are missing from the iPhoto app but still stored in the iPhoto Library package? The corruption to some folders from 2007 must have happened a while ago. My b

  • Loca repository Creation BODS 4.0 SP3

    Hi, Can any of you please let me know, how to add local repository on SAP-BODS 4. SP3, In earlier versions I know that we have Data services repository manager through which we could created..But In SP3 I found through Help documentation that through