I need to update EKPO-NETPR thru me32L transaction

hi,
i need to update EKPO-NETPR thru me32L transaction.
In me32L if i give the scheduling agreement number->then select the particular item->select the item condition button->selecting validity period->updating the amount field in KONP-KBETR manually then the EKPO-NETPR is getting updated.
where as if i try thru BDC its not getting.
pls suggest me the solution.
thanks

Hi
Its been answered in this thread checkout for badi here badi for me21n tcode
A few other also here
BBP_ME_CREATE_PO_ITEM_40B
EXIT_SAPLMCP2_008
EXIT_SAPLMCP2_009
ME_CREATE_PO_ITEM
Reward if useful
Regards
Divya

Similar Messages

BUT000 table augrp filed need to update before save of BP transaction Urgen

Hi
I am working on the BDT. I project needs the BUT000 augrp field needs to filled with the it business relation partner augrp combination.
I am able to get the BUT000 data using FM 'BUP_MEMORY_BUT000_GET and not able to fill back into global memory when FM used here like FILL
When I tryed to put the code in DSAVC after BUP function module I am able to see the chages in the memory but when it is coming to DASVE at that time the memory is getiing OLD values NO NEW VALUES I FOUND
I need to know where i need to put this data i.e under which BDT event is DTAKE or DSAVC or DSAVE,
Please let me know any one worked on this or how we can update the value of BUT000-augrp value
Points garunted

I think that Business Data Toolset is in All in one and not in Business One. If is it so, send question to right forum.

Why, after updating plug-ins thru firefox's system [specifically adobe acrobat 10.1.4.38] it doesn't recognize it and says I need to update ?

This has been happening on & off for awhile. I've tried updating thru firefox, uninstalling & updating in firefox, and within acrobat. It says its updating but the version doesn't change & can't find any evidence it did. Even uninstalling it still reinstalled 10.1.4.38 - the same version I've had since started using firefox.
By the way, today I updated 'Shockwave Flash' thru same place & update said it still needed to update (cant remember which version it said) but I had disabled ''Shockwave for Director'. When I enabled it the update stopped saying it needed Flash update.
Any chance there is a link between Acrobat & something else similar to the 'Director' that will assist in update recognizing it? A distant cousin-program?

Thank you so much jscher2000. You must be a '''God of Geeks''' cause nobody would tell me what they are all for & whether I needed them or not. And there you just rattled them off like it was no effort at all. You are my lucky day - the kind that only happen once a year. Thank you, me & my freshly broken leg will appreciate it and now I'm downloading that Secunia program. Gonna find them buggers and fix my 'puter good! HAHA! 8)

My iPod said that it needed to do an update but halfway thru it stopped and said there was an error and now it's stuck with the apple and an empty loading bar. Also it won't register with my computer. Help?

I plugged in my iPod and it needed an update. Before the update could complete it said there was an error and then closed the window. Now my iPod is stuck in the loading screen and won't register in iTunes. Please Help.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Need to update table from Maintenance view (Very Urgent !!!)

Hi Abap Guru's,
I got a requirement where in I need to create a new Zprog so that it shld give a call to view v_abc and thru this view I need to update the table abc if any duplicate entries are entered then I shld popup a message.
Cld u plz help me out how to go further with this requirement and any suggestions...
if we create a table maintenance generator for the table abc then it will check for the duplicate entries are not ? if it checks for the duplicate entries then my job is done esaily but how to assign the zt-code to the table maintenance ?
awaiting for u r answer's and realyy appreciated with lots of points.
Regards,
Ravi V Ganji

Hi,
   table generator will check duplicate entries as any
   other table .
    table maintanance Generator is used to manually
    input values using transaction sm30
    follow below steps
   1) go to se11 check table maintanance check box under
      attributes tab
   2) utilities-table maintanance Generator->
      create function group and assign it under
      function group input box.
      also assign authorization group default &NC& .
   3)
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
   4) select maintaience type as single step.
   5) maintainence screen as system generated numbers
      this dialog box appears when you click on create
     button
    6) save and activate table
   using sm30 you can create entries manually.
also check below thread to assign transaction code to
table generator
Re: Table Maintanance Generator
create transaction use se93
select parameter transaction and give below attributes
Transaction code      ZTX1
Transaction text      Maintain View ZSDCZTVIEW
Transaction        SM30            Screen             0
                                          From module pool
Name of screen field           Value
   VIEWNAME                       ZSDCZTVIEW
   UPDATE                         X

Need manual updates for 9.2 and 9.55 to do clean reinstall of acrobat 9.0 pro from cd

I just did a new nstallation of acrobat V9.0 professional from CD:
I need a link to the master incremental update for 9.2 and the master 9.55 incremental update that goes from V9.2 to V9.55
I am looking for a master baseline release.
My reinstall is on an old XPSP3 machine. When acrobat professional 9.0 goes away I will still need the incremental update from V9.0 to V9.55
I do not need to put acrobat X or acrobat XI on this machine. A new acrobat X or acrobat XI license is for a new machine.
I keep all my master and incremental updates in archival. That way i can rebuild my machine.
This is the way it is normally done.
the autoinstaller jumped me from V9.0 on CD to V9.2 and from V9.2 to V9.55.
I dont' see master releases in the table that do the same thing.
there were only 2 updates.
normally support would just send me a link out-of-band. i understand I need to send the request thru the forum
many thanks!

Most of the manual updates are not cummulative. It sounds like you did the updates from the help menu (and many of those are cummulative -- don't know why they are not available). You may be able to find the updates you used on your harddrive -- I have seen them before, but don't remember where, probably the users folder or such.

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

BAPI_GOODSMVT_CREATE ---- need to update custom field in MSEG table

Greetings all,
I'm using 'BAPI_GOODSMVT_CREATE' to create goods movements. also I need to update one cutom field(z-field) in MSEG table. Could anyone please advice how can I update the custom field thru EXTENSIONIN.
thanks in advance.

see the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure

A message on the screen said I need to update Firefox but I checked and it is current

When I opened Firefox (the homepage is www.google.com) there was a message saying I needed to update Firefox, and after a couple times, I checked and Firefox is current, it doesn't have an update. My computer OS is Mac 10.5.8. I also have concerns the computer has recently been tampered with thru the internet. I'm computer illiterate.
== This happened ==
Just once or twice
== in the last couple weeks

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Updating Ekpo by adding item level Screen Exit

Hi,
I added 2 fields at the item level of the ME21N Screen using the following screen exit.
( SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item. )
Now I just want to update EKPO table.,. How to proceed. any body know guide me.
Thanks & Regards.
Balajee.J

Hi Mou,
In this there are four methods
1)ACTIVATE_TAB_PAGE
2)TRANSFER_DATA_TO_SUBSCREEN
3)TRANSFER_DATA_FROM_SUBSCREEN
4)PASS_FCODE_TO_SUBSCREEN
In thw first method pass the tabname,screen no,position all.
fcaption = 'C Form Details'.
fprogram = 'Z_VLO1N_HEAD'.
fdynpro = '0200'. This is the screen created and kept all custom fields
Here you the concept set and get data and move and get the values.
TRANSFER_DATA_TO_SUBSCREEN
set PARAMETER ID 'Z' FIELD f_vbrk-ZCF.
TRANSFER_DATA_FROM_SUBSCREEN
get PARAMETER ID 'Z' FIELD fvbrk-ZCF.
Pass all these parameters it will resolve your issue.Check and post if need help.
Regards,
Madhu.

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to pur

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.

you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

Hello,
As frustrating as it seems, your best to post any frustrations about the iPhone in the iPhone discussion here:
https://discussions.apple.com/community/iphone/using_iphone
As this discussion is for iBook laptops.
Best of Luck.

I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already login with my own Apple ID.

I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.

Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I need to update EKPO-NETPR thru me32L transaction

Similar Messages

Maybe you are looking for