I need to update my Radeon HD 6490m graphics card on my pavillion dv6 running windows 7 64bit

I have a HP Pavillion dv6 Notebook PC
running Windows 7 home edition 64 bit.
I have a Radeon HD 6490 graphics card
When I tried to run Diablo 3, it told me my graphics driver was out of date. Could someone give me a link for the new driver and
also add instructions to how to add it?
I went to the AMD website and they told me to contact the notebook manufacturer. Thanks!

Yes dear
I meet problem on radeon Hd 6490 m update to support my new install protram WiDi of Microsoft.
Please help me to oppose the warning of Windows.
Thank.
Your sincerely.
Suong Sophal (soseabp)

Similar Messages

  • Need to update Mac Pro drivers without graphics card.....

    I have a 1.1 Mac Pro. The ATI Radeon 2600 graphics card that came with it is completely broken. I am trying to replace it with a ATI Radeon HD5770 which should be compatible, however as I have never really updated my OS (unfortunately I cant remember which OS it has on it at the moment, it's the one that came with it) I don't think I have the neccessary drivers. Any ideas of how I can update the drivers without haveing to buy another graphics card? If it's any help I also have a Macbook Pro. Thanks in advance.

    5770 cards require one 6-pin Aux power cable from the motherboard to the card. Aftermarket cards do not always include it, but it MUST be connected.
    That is a PC-BIOS card flashed with Apple Firmware. In general, such cards do NOT show the Boot Screens or any diagnostic screens. The first screen you see will be the login screen, or if you auto-login, the desktop.
    The seller says It will show the Boot Screens ONLY if you connect an Analog VGA display (with adapter) to the lower DVI-I port.
    Drivers for accelerated operation of this card are included with custom 10.6.4 shipped with certain Mac Pros, and in standard 10.6.5 and later. All appropriate Drivers are already included in Mac OS X -- there is no need to install them later, and no way to do so since they will not work in older versions.
    Official information lists the Mac OS X that shipped originally with your Mac Pro 1,1 as 10.4.7, but it may have been as late as 10.5. These are not likely to work with that card. You would probably need to purchase a 10.6 DVD from the Apple online store, about US$30.
    Most Users who are not developers would be better served with a genuine Apple card, which would show a picture from power-on. But it costs close to US$250.

  • Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

       Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
    "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
       I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
    OS 10.7.5
    Mac Pro 1,1
    20gb ram
    ATI Radeon HD 5770 Graphics Card
    30" Apple Cinema HD display

    after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

  • Can I change my AMD Radeon HD 7670m Graphics card to Nvidia GTX 980m

    Can I  change my AMD Radeon HD 7670m Graphics card to Nvidia GTX 980m

    Welcome to Apple Communities
    Apple releases updates, and you have to wait because Apple creates the graphics drivers. You need to check updates to know that you have the most recent version

  • Imac with radeon x 1600 graphics card will not send signal to projector

    I am using an Imac running Boot Camp. The Imac has a Radeon X 1600 graphics card. I have installed the latest driver in XP. The Device manager recognizes the correct card.
    The problem: I cannot get our projector to pick up the signal from the Imac. I have systematically gone through all the display settings. Others who have similar problems seem to have graphics cards with additional software that allows them to select a clone display feature.
    Any thoughts? The projector works fine with a macbook running bootcamp (xp).

    Hi Cathy and welcome to Discussions,
    sounds to me as if you are missing the Catalyst Control Center, which usually provides these kinds of setting.
    You can download both Drivers and the Control Center from the ATI/AMD website here: http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
    The Control Center needs a Windows where the .NET Framework (2.0 at least) is already installed before installing the Control Center, otherwise it does not work.
    You can download that from Microsoft http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd -aab15c5e04f5&displaylang=en
    Hope it helps.
    Good Luck
    Stefan

  • How do i make amd radeon my primary graphic card instead of the intel hd graphics ?

    i am new to using macs and was wonding how to make the pci-e amd radeon my primary graphic card as it is better than the onboard card that i am currently using.
    the amd card is already inside the laptop but i dont know how to make it my primary graphics card

    System Preferences > Energy Saver
    checkbox Automatic graphics switching.
    With this box unchecked it will always use your dedicated graphics card. With it checked it will only turn on when needed. This will save a lot of battery life, as it will only use it when needed. For example while playing a video game and not while watching a movie.

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." help!

    I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated!  Thanks in advance.

    Hi c1r1g1,
    If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS

    Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS. I'm getting "no audio output device is installed" error after trying various different drivers. Sometimes the driver will install and I'll reboot, but to no avail I end up with the same error and a red X over the speaker in the system tray. I've tried Realtek drivers and Conexant drivers from HP. When I run Windows upgrade advisor it recognizes the problem, but Microsoft doesn't offer a compatible driver. At this point I'm very desperate considering everything else works fine and I don't want to go back too XP Media Center. If there is anything you can do to help, it would be greatly appreciated. Thank you

    I guess this one isn't even 64 bit but it is the one on HP's site:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1&cc=us&dlc=en&lc=en&...
    I never tried to force a driver but I think it can be done.  I seeing that in some threads.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

    I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
    I followed the FAQ troubleshooting and that didn't help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Radeon r9 290 graphics card no detection on system??!

    Got a Radeon r9 290 graphics card in a msi 797-g45 gaming motherboard and the graphic card is not being detected.. i go into bio's and no sign of it being there. The fans works fine on the graphics card but no detection it being used by teh system??
    i bought this card a while back in September 2014 and only recently chucked my new computer. i've tried everything. pretty gutted at the moment. any suggestions???

    797-g45 doesn't exist. Do you mean Z97?
    What is your PC made of: PSU, RAM, CPU, BIOS version. Provide detailed info (brand/model/amount>RAM< /wattage>PSU<) What radeon r9 290 exactly it is?

  • Radeon 7500 Normal AGP card Without ADC (Used before on Windows Vista PC)

    Dear ...
    i read in some articals on internet that you can use this kind of Cards "Radeon 7500 Normal AGP card Without ADC (Used before on Windows Vista PC)" with Mac G4 Quicksliver 733Mhz ... just u have to install it and leave Machine on for sometimes till dedicated it is thatture ?
    Message was edited by: waldhin

    A Radeon 7500 (as well as any other AGP graphics card) that was removed from a PC must have its EEPROM chip re-programmed to function in an Apple computer. This is usually done while the card is installed in a PC, using a compatible flash utility program and the correct ROM code taken from the Mac version of the same card.

  • Radeon 9000 Pro Graphics Card

    Hi Everyone:
    Will the Radeon 9000 Pro Graphics Card work in the G4 Tower with a 2x slot?
    What about in a iMac G4?
    Thanks-
    Sue

    Thanks Guys-we figured it all out in the iMovie discussions!
    Sue

  • How to Update the driver of your graphics card

    When I open Photoshop CC, I get this message:
    "3D features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system. Updating the driver of your graphics card may resolve the issue."
    I went to the website they recommended but found nothing about this. How can I determine if this is the problem? How do I find out how much vRAM I have? How do I update the driver of my graphics card?

    You cannot upgrade the GPU except by buying a newer model with a better GPU. Normally, with shared RAM the GPU will have a maximum of 384 MBs of VRAM with 4 GBs of installed RAM. That will increase by about 128 MBs per 2 GBs of additional installed RAM.

  • Installing 2 AMD Radeon HD 7450 graphics cards in my pc

    I have a second AMD Radeon HD 7450 graphics card and am wondering if it can be installed in my p7-1459 to imporve gaming performance.  If it can, can you also direct me to installation procedures.
    This question was solved.
    View Solution.

    The simple answer is "NO".  There is no place to insert the card. Here is the motherboard, and the card.  The motherboard has only 1 graphic PCIEx16 slot, and 3 PCIEx1 slots.
    In the example below, the 4 pin ATX plug is marked.  Below that is the longer PCIEx16 slot, followed by 3 PCIEx1's.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

Maybe you are looking for

  • HP Officejet Pro X47 not picking up paper

    My warranty expired after one year exactly two weeks ago. Suddenly the printer has stopped printing, as it does not pick up the paper any longer. Help. The printer should still be in very good condition. The console is stuck displaying " Now Printing

  • The requested URL /apex/f was not found on this server

    Hi! In my project I've rebuilt a lengthy process on a page being used for months. I tested it thoroughly at home on APEX 2.2/Windows. Today I imported the project at my customer on APEX 2.1/Linux and trying to open this page I get the above error mes

  • Controlling Dutch MacBooks from a German MacBook (keyboard layout)

    I work at a company which has about 200 MacBooks with Dutch keyboard layouts (QWERTY), but I've got a German keyboard layout (QWERTZ) on my own MacBook. ARD is installed on my MacBook with German Keyboard layout. For some reason ARD uses the keyboard

  • Focus problem Lumia 720

    Hi, I'm brazilian, and brazilian people cant help me. Anyway, I have a Lumia 720... I can use any app, but focus don't work! Auto focus or manual. You can see an example, (picture att). Left picture (it's my street), 2 months ago. Right picture, now.

  • How to retrieve the BRF+  function result data object of type table in ABAP

    Hi, I am calling a BRF+ function from Abap....If the result data object of the function is element then i am able to get the value back in ABAP...Suppose the result data object of the function is of table type,I couldnt retrieve the value....Can you