I need to upgrade my MacBook late 2008, what are my options

I need to upgrade my MacBook late 2008, what are my options. I have already upgraded RAM to 4 GB some 4 years ago. Also replaced HDD to 1TB, but ended up with a slower response. I am looking to switch the HDD again to speed up the performance. Any suggestions?
I am open to upgrade the hardware, what options do I have?
Motherboard?
HDD?
Anyway I can increase RAM from 4 GM to higher?
Appreciate tips...

It was a mistake on my part, I tried reinstalling the RAM chips... I love the speed now...
next step to switch to 1TB SSD.... Another $700.00 and my 6+ year McBook will be new again

Similar Messages

  • Looking to upgrade my macbook late 2008

    Hi all,
    I am looking to upgrade my macbook late 2008 aluminum, i have done a little research and found a few parts which i want to install in my macbook. I just wanted to know if my mac was compatible with the following hardware:
    Hard Drive:
    Samsung Spinpoint M8 1TB 2.5 inch SATA II 8MB 9.5mm Hard Drive
    Memory:
    Komputerbay 8GB (2x 4GB) DDR3 SODIMM (204 pin) 1066Mhz PC3 8500Al
    My macbook specs are:
    Model Name:          MacBook
    Model Identifier:          MacBook5,1
    Processor Name:          Intel Core 2 Duo
    Processor Speed:          2 GHz
    Number Of Processors:          1
    Total Number Of Cores:          2
    L2 Cache:          3 MB
    Memory:          2 GB
    Bus Speed:          1.07 GHz
    I am thinking of installing these by myself, if this possible? And if so how could i go about doing this?
    Thanks for reading, i would appreciate any help.

    Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
    Here are video instructions on replacing the RAM on the Aluminum Unibody.
    http://eshop.macsales.com/installvideos/macbook_13_unibody_mem/
    And read this before putting 8gb in your MacBook http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb

  • Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

    Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac? 
    Thanks to your feedback.

    Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
    (74380)

  • 320GB really the max upgrade for MacBook (Late 2008 Aluminum Uni)?

    So, I've got my MacBook. It's the 13.3" aluminum unibody, from late 2008. Everything in it is stock, except I've upped the memory from 2GB to 4GB. The harddrive is still the original 250GB, which is pretty much full. I've been told by Apple that the highest capacity I can put into this one is 320GB, yet I see tons of posts from people who have put 500GB/1TB drives in and was wondering how THEY can do it, but I can't.
    Any suggestions/advice?

    Welcome to the Apple Support Communities
    It's listed as a MacBook. See > http://support.apple.com/kb/ht1651#link2
    As you can see, Apple officially supports 4 GB of memory in the Late 2008 Aluminum MacBook, but you can install 8 GB of memory without any problem. You can buy the memory in OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

  • Hard Drive Failure on Rev 1 Macbook Air. What are my options?

    My HD on my Macbook Air (Rev 1) 1.6 ghz 80 gb pata HD has failed. so I am going to have to take to it an Apple Service provider to fix. My question is what options do I have, I.e. Could I upgrade disk size, put in an SSD drive instead or is my only viable option to go for a like for like change. grateful anyones thoughts.
    Thanks In advance for the help.
    James

    Lots of people have swapped out for SDD. If you are going through a service provider then best to ask them what they are comfortable doing. It may be they will only install what they supply and maybe only Apple authorized parts.
    http://www.google.com/products?q=macbookair+ssdpata&hl=en&aq=f

  • I have flex builder 2 full version with charting full version. I want to upgrade to flashbuilder 4.7 what are my options

    what will it cost

    How full is your Mac's hard drive?
    Locate your iMac's hard drive icon on the OS X desktop. Click the icon once, then use the keyboard key combination Command-I. This will give you additonal info about your iMac's internal hard drive.  
    Your iMca model can take a max. RAM of 6 GBs.
    You can replace one of the 2 GB RAM modules with a 4 GB module.
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    OWC (macsales.com) has the proper 4 GB RAM module for replacement/upgrade.
    http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S4GB/
    Good Luck!

  • Upgrade SATA drive for macbook late 2008

    Hello!!
    I am here to ask for help. Let me tell you a bit more about my Mac:
    Late 2008 silver 13" MacBook 250GB 2GB RAM 2.4GHz IntelCore2Duo DDR3 MB467LL/A, currently at 10.5.8 OSx system (yes I know I need to update the software as well!)
    I currently bought 4GB kit (2x2GB) RAM to upgrade on my silver MacBook (late 2008), and would also like to update my hard drive.
    I have looked around on online shops for 2.5" 9mm SATA drive, and came across to 1TB for not too bad a price (between £85 to £100).
    Anyone know whether if this is ok for my laptop?
    Samsung, WD Scorpio Blue and Toshiba, all are at 5400rpm for 1TB. (However there is 750GB Seagate 7200rpm 16MB - recommended???)
    Large memory/drive are usually much needed with me as I do use a lot of design work e.g. Adobe InDesign/Illustrator/Photoshop...you get the drift .
    Any advice would be much appreciated!
    Looking forward to hear from you soon!
    Thanks again,
    ejburton.

    If all the technical specs (like SATA, physical dimensions, power usage etc) all match then you can use any drive of any available size in your MBP. Right now it appears that the largest available is the Western Digital 250GB 5400rpm drive where as the fastest is the Hitachi 200GB 7200rpm drive. Fujitsu and Toshiba have annonce 300GB drives though I've not heard that either are yet shipping.
    I have to say that I'm very pleased with the Hitachi 200GB 7200rpm drive.

  • I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol

  • Is it possible to upgrade the graphics card in my aluminum 13-inch Macbook (Late 2008)?

    My 13-inch Macbook (Late 2008) currently uses the NVIDIA GeForce 9400M 256 MB graphics card, but I want to upgrade it, so that I can play games at a higher quality. Is this possible? If so, what graphics cards are compatible with my Macbook (Late 2008)?
    Thank you.

    The graphics card on a MacBook is part of the logic board not a separate card so it can't be upgraded.

  • Upgrading MacBook Late 2008

    I’ve had my MacBook 13″ Late 2008 now for three and a half years, and it has been used every day since I bought it, and with every passing day, it’s getting slower and slower. I’ve checked with every forum out there to find methods for speeding it up, but nothing works! I’m therefore convinced my hard drive is failing. I want to get a new one, and better memory than the standard 2Gb while I’m at it, rather than buy a whole new MacBook. Luckily, I have a few pennies saved up and want so splash out to get the creme de la creme of upgrades. Any advice on the latest gadgets? Both for hard drives and memory? Can SSD's be put into the late 2008 laptop? Thanks, C

    You are also able to upgrade to Mountain Lion.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Hard drive upgrade 13" aluminum macbook late 2008

    I want to upgrade my hard drive on my 13" aluminum macbook (late 2008) and I can't seem to find any documentation that suggests how large of a hard drive I can install on the computer.  I would like to do at least 500 gb, but more is good.  Anyone have any info for me?
    Thanks!
    Jeremy

    You can install any drive up to 1tb easily. For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
    Or OWC  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are video instructions on replacing the hard drive on the Aluminum Unibody  http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/

  • HT2368 Hello, I have MacBook Late 2008 (Unibody). And I can't install this firmware, need help. Thanks

    Hello,
    I have MacBook Late 2008 (Unibody). And I can't install this firmware MacBook SMC Firmware Update 1.5
    Need your help.
    Thanks

    Also, according the the 1.4 update page here: http://support.apple.com/kb/DL974
    It will update the Boot ROM version (on MB 5,1) to MB51.007D.003.
    Yet I have (MB 5,1) Boot ROM version MB51.007D.B03. Weird again!
    What a mess Apple. Considering how important firmware updates are you'd think they could make this a little clearer.
    Anyways, again, I don't think we need it.

  • Even though the battery in my Macbook late 2008 shows 995 charged the power adapter light continues to glow red. What do I need to do? s/w fully uptodate, plenty of ram and hd space.

    Even though the battery inb my Macbook late 2008 shows 99% chrged the indicator glows red(amber?) What do I need to do? s/w is up to date. Plenty of RAM and HD. s/n W8*******1AX
    TIA
    <Edited by Host>

    Might be the adapter >  Apple Portables: Troubleshooting MagSafe adapters

  • I need to upgrade my MacBook Pro from 10.5.8 - where can I find Snow Leopard?

    I just upgraded my iPhone to os6 and now can't get into iTunes.  Can't upgrade iTunes because I'm still on 10.5.8.  Looks like I need to upgrade to Snow Leopard, then to Lion before I can buy Mountain Lion.  I can't seem to find Snow Leopard avaiable for purchase.  Can anyone help?

    Upgrading to Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax.  It's a download.
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • HT1338 i have a macbook pro 10.6.8 and need to upgrade to mavericks 10.9 what do i need to do.I also run a windows parrellel that has my comapny software and quikbooks on it.

    i have a macbook pro 10.6.8 and need to upgrade to mavericks 10.9 what do i do - i also have a paralel for windows with company software and quikbooks.

    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    If this is a company computer or is used with company software, I suggest you do not upgrade to Mavericks without first checking with your company. Older software may not work with Mavericks. Some of it may need upgrading, and that may be something your company is unwilling to pay for.

Maybe you are looking for

  • Simple RMI over HTTP in MIDP1.0 - open source project

    Hi All, For anyone interested in doing remote method calls (over HTTP) to a server from a MIDP 1.0 MIDlet there is an open source project now available for this. Please see MeRMI (Micro Edition RMI) at: http://mermi.dev.java.net You can use this to c

  • Processing down payments

    Hi, I want to know the steps of doing vendor down payments. I have a PO for $10000 and i want to make a down payment for $2000 for this PO. I have not received an invoice yet for this.What steps should i be doing to pay the $2000 down payment? and wh

  • Handling dynamic item data in VSTS

    Hi Team, Can you please let us know how to handle dynamic item data in VSTS. Regards Raghavendra 8105577088

  • Error in dbWriteTable()

    I have successfully installed ROracle.1.1-4 under R 2.15.0, Windows 32bit, my configuration is detailed here: Re: ROracle 1.1-4 install failure for R  64 only: R version 2.15.0, Rtools215 I am able to connect to my Oracle database from within R and t

  • IPhone 5 scrapes, scratches, and scuffs right out of the box

    Today i was a bit scared of opening 2 shiny new iPhone 5's. i had heard various reports of damaged iphone 5's due to the recent foxconn riot. And sure enough, both were damaged. I would just like to find out if anyone has an idea if returns are accep