I need to upload data to icloud;display nor wrkg so cant enter passcode?

My ipad2 display has gone bad; was told to plugin my ipad to my computer; log in to itunes to upload my data to the icloud before returning it for a replacement. However, the computer tells me i need to enter my passcode so the my computer can access. Since i cant see anything on my ipad i can't enter the access code.
Suggestions?

You can't backup the iPod t iTunes then. You will have to use an existing iTunes backup.
If iCloud backup is turned on and the iPod is still working (not disabled), the iPod will automatically backup daily if an internet connection is available and the iPod is connected to a charging source.

Similar Messages

Can I choose which programs or apps upload data to iCloud?

My iCloud account tells me that my 5GB are full (that's right from the start when I updated the software to iOS5 :-S) Well, I noticed that there are actually just a few apps that I would want to make data backups for in iCloud. Can I choose which programs use that function? The only option I found so far is to turn the data backup function off or on, for ALL the apps. But I only want to use it for a FEW ones! Is this supported in iOS5??
PS. How come it gets full so quickly? The programs that uses most data (Hipstamatic for example) use only barely 0,5GB. So what I can see the 5GB shouldn't be full yet. What have I missed?

I think starting from the second home screen, the new app will be placed in the first available space. If this is the case, you would be able to control the placement manually by making sure your landing screen has empty icon slots and all previous screens, with the exception of the first one, have all of the icon slots occupied. I did run across an app that seemed like it would allow the user to create placeholder icons on the home screens but I can not think of the keywords to pull it up now. There are several icon creators/enhancers that may do the same thing. You can use one of these apps or use the Safari button to Add to Home Screen, to fill up the screens. You could even use a folder to store and deploy your screen filler icons. It seems like it would be more trouble than it's worth but I do have my home screens assigned for different roles. Hopefully Apple will continue to refine the user interface.

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. don't forget to relaese it
create idoc using above segments using we30 don't forget to relaese it
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

Upload data from Excel to Sap-Crm

Hi All,
I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

Upload data from SAP R/3 to BPC

Hi Expert
We need to upload data from SAP R/3 Payroll to BPC into to use in a butget process. We actived 0HR_PY_1 extractor and we have data at PCA area. My question is how i can to load this data into a appset in BCP.
Please give any idea to do that.
Thanks

Hi,
There are multiple ways of extracting data from ECC to BPC.
If you have SAP BW implemented for your HR area then you can load data from SAP BW info provider to SAP BPC.
check out the following thread.... all these things are already widely discussed in the forum.... all thats required is to search.....
you have got to use Transformation and conversion files.....
[How to load Transaction Data from BW to BPC]
If SAP BW is not implemented then the other way is to extract the payroll data into Flat files and use the data manager package to upload the data.... you got to prepare transformation and conversion files for this as well.
Directly from ECC is not possible as of now.....
Regards,
Surya Tamada.

Uploading Data from R/3 to BI7

Hi,
weather am asking correct or not i don't know ,am very new to BI.
To upload data from R/3 to BI weather we need to install separate R/3 system. or In my Bi7 itself i need to create one more client and from their i need to upload data to BI. Please can any one clarify me , if am asking wrong question plz explain me, It will be great helpful to me.
Thanks,
Medha.

Both are diff system and you connect them.
How to connect em
Connect from BW to R/3
BW to SAP R/3 CONNECTION
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw04/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc

Upload data into ztable

Hi all,
i need to upload data from notepad into ztables. what is the best method of doing it? do we use gui upload? when do we use BDC and when to go for LSMW? Thanks in advance.

Hi Lathika,
For uploading data from notepad to ztable you can use GUI_UPLOAD function module. If you have to upload legacy data into some standard transaction such as MM02 then you can use a BDC or LSMW.
LSMW is a ready tool provided by SAP and you have to follow some 17 steps to migrate data. In batch input method ,you need to do recording for the transaction concerned.BDCs Session method is the better choice because of some advantages over call transaction. But call transaction useful to do immediate updation of small amount of data. (In call transaction developer has to handle errors).
Thanks & Regards
Subathra

Uploading data into Time Infotypes

Dear All,
I have a requirement wherein I need to upload data into time infotypes from an external source(file). The data is required to be uploaded into the relevant infotypes based on the content(attendance, absence etc.)
Can you please suggest a generic way of uploading data into time infotypes.
Thanks in advance,
Sujit.

Hi Sujit
You can either create a BDC report to upload the data or use FM HR_INFOTYPE_OPERATION to upload the infotype in your report

Upload data into MARA

Hi Experts,
I need to upload data into mara table from quality system to drd system becase my all record of mara table get deleted.
i download all record into one excel sheet (i was unable to download all field at one time to i dowin load 2 3 time and murge into one excel sheet).
but when i am applying gui_upload function gerring message Access to file denied or Cannot interpret data in file .
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 10:13 AM

Hi,
Please check with google it will have all the ways to upload Material Master.
Goto **************** where you will find step by step for uploading all the masters.
try and use the standard project to upload the masters.
Hope it will work for you.
please also search in SCN hopefully you will find 1000's

BDC Recording for uploading data into Fi01

HI,
I need to upload date from a file into SAP Fi01 transaction
i used a sample program and added my bdc recording to it as per instrucrion
there is a error while uploading.
i believe it is at the place i am pointing in bold. it is at read dataset. could you advice me how to solve it.
CODE:
REPORT Z_BANK_DIRECTORY
NO STANDARD PAGE HEADING
LINE-SIZE 200
LINE-COUNT 300.
*-- DATA DECLARATION--
*---Types
DATA : BEGIN OF t_upload,
data element: BANKS
 BANKS_001(003),
data element: BANKK
 BANKL_002(015),
data element: BANKA
 BANKA_003(060),
data element: REGIO
 PROVZ_004(003),
data element: STRAS_GP
 STRAS_005(035),
data element: ORT01_GP
 ORT01_006(035),
data element: BRNCH
 BRNCH_007(040),
data element: SWIFT
 SWIFT_008(011),
data element: BGRUP
 BGRUP_009(002),
data element: AD_TITLETX
 TITLE_MEDI_010(030),
data element: AD_NAME1
 NAME1_011(040),
data element: AD_STRSPP1
 STR_SUPPL1_012(040),
data element: AD_STRSPP2
 STR_SUPPL2_013(040),
data element: AD_STREET
 STREET_014(060),
data element: AD_CITY2
 CITY2_015(040),
data element: AD_CITY3
 HOME_CITY_016(040),
data element: AD_PSTCD1
 POST_CODE1_017(010),
data element: LAND1
 COUNTRY_018(003),
data element: AD_POBX
 PO_BOX_019(010),
data element: AD_PSTCD2
 POST_CODE2_020(010),
data element: SPRAS
 LANGU_021(002),
data element: AD_TLNMBR1
 TEL_NUMBER_022(030),
data element: AD_MBNMBR1
 MOB_NUMBER_023(030),
data element: AD_FXNMBR1
 FAX_NUMBER_024(030),
data element: AD_SMTPADR
 SMTP_ADDR_025(132),
data element: BANKA
 BANKA_026(060),
data element: REGIO
 PROVZ_027(003),
data element: STRAS_GP
 STRAS_028(035),
data element: ORT01_GP
 ORT01_029(035),
data element: BRNCH
 BRNCH_030(040),
data element: SWIFT
 SWIFT_031(011),
data element: BGRUP
 BGRUP_032(002),
END OF t_upload.
*--- Tables
DATA : BEGIN OF i_bdcdata OCCURS 0."to hold the transaction t_upload
INCLUDE STRUCTURE bdcdata.
DATA: END OF i_bdcdata.
DATA: i_upload LIKE STANDARD TABLE OF t_upload," to hold file data.
i_upload1 LIKE STANDARD TABLE OF t_upload." to hold file data.
*--- Work Areas
DATA: wa_upload2 LIKE t_upload,
wa_upload LIKE t_upload,
wa_upload1 LIKE t_upload.
*--- Variables
DATA: v_count1(4) TYPE n,
v_error TYPE c,
v_session(12),
v_field(21) TYPE c,
v_message(60) type C.
*--Constants
DATA: c_open TYPE c VALUE '(',
c_close TYPE c VALUE ')',
c_x TYPE c VALUE 'X'.
*---Initialisation
initialization.
refresh : i_upload , i_upload1 ,i_bdcdata.
-------Selection Screen Design -
*Selection screen for input of upload file address
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
---AT SELECTION SCREEN -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*--For popup to select file.
PERFORM give_help.
-----START OF SELECTION -
START-OF-SELECTION.
*--Data upload using WS_Upload.
PERFORM get_data.
*-- OPEN SESSION
PERFORM open_group.
*--Insert transactions using BDCDATA table in the session.
PERFORM do_transaction .
*-- Close the session.
PERFORM close_group.
END-OF-SELECTION.
*& Form f_get_data
For data upload from external file.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
DELETE I_UPLOAD INDEX 1.
ENDIF.
ENDFORM. " f_get_data
*& Form F_open_group
To open session in session management.
FORM open_group.
v_session = 'FI01'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = v_session
user = sy-uname
keep = 'X'.
ENDFORM. " F_open_group
*& Form f_do_transaction
Insert transactions in session after passing values to BDCDATA
FORM do_transaction.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
read dataset wa_upload into t_upload.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPMF02B' '0100'.
perform bdc_field using 'BDC_CURSOR'
 'BNKA-BANKL'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'BNKA-BANKS'
 t_upload-BANKS_001.
perform bdc_field using 'BNKA-BANKL'
 t_upload-BANKL_002.
perform bdc_dynpro using 'SAPMF02B' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'BNKA-BGRUP'.
perform bdc_field using 'BDC_OKCODE'
 '=ADDR'.
perform bdc_field using 'BNKA-BANKA'
 t_upload-BANKA_003.
perform bdc_field using 'BNKA-PROVZ'
 t_upload-PROVZ_004.
perform bdc_field using 'BNKA-STRAS'
 t_upload-STRAS_005.
perform bdc_field using 'BNKA-ORT01'
 t_upload-ORT01_006.
perform bdc_field using 'BNKA-BRNCH'
 t_upload-BRNCH_007.
perform bdc_field using 'BNKA-SWIFT'
 t_upload-SWIFT_008.
perform bdc_field using 'BNKA-BGRUP'
 t_upload-BGRUP_009.
perform bdc_dynpro using 'SAPLSZA1' '0201'.
perform bdc_field using 'BDC_CURSOR'
 'SZA1_D0100-SMTP_ADDR'.
perform bdc_field using 'BDC_OKCODE'
 '=CONT'.
perform bdc_field using 'SZA1_D0100-TITLE_MEDI'
 t_upload-TITLE_MEDI_010.
perform bdc_field using 'ADDR1_DATA-NAME1'
 t_upload-NAME1_011.
perform bdc_field using 'ADDR1_DATA-STR_SUPPL1'
 t_upload-STR_SUPPL1_012.
perform bdc_field using 'ADDR1_DATA-STR_SUPPL2'
 t_upload-STR_SUPPL2_013.
perform bdc_field using 'ADDR1_DATA-STREET'
 t_upload-STREET_014.
perform bdc_field using 'ADDR1_DATA-CITY2'
 t_upload-CITY2_015.
perform bdc_field using 'ADDR1_DATA-HOME_CITY'
 t_upload-HOME_CITY_016.
perform bdc_field using 'ADDR1_DATA-POST_CODE1'
 t_upload-POST_CODE1_017.
perform bdc_field using 'ADDR1_DATA-COUNTRY'
 t_upload-COUNTRY_018.
perform bdc_field using 'ADDR1_DATA-PO_BOX'
 t_upload-PO_BOX_019.
perform bdc_field using 'ADDR1_DATA-POST_CODE2'
 t_upload-POST_CODE2_020.
perform bdc_field using 'ADDR1_DATA-LANGU'
 t_upload-LANGU_021.
perform bdc_field using 'SZA1_D0100-TEL_NUMBER'
 t_upload-TEL_NUMBER_022.
perform bdc_field using 'SZA1_D0100-MOB_NUMBER'
 t_upload-MOB_NUMBER_023.
perform bdc_field using 'SZA1_D0100-FAX_NUMBER'
 t_upload-FAX_NUMBER_024.
perform bdc_field using 'SZA1_D0100-SMTP_ADDR'
 t_upload-SMTP_ADDR_025.
perform bdc_dynpro using 'SAPMF02B' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'BNKA-BANKA'.
perform bdc_field using 'BDC_OKCODE'
 '=UPDA'.
perform bdc_field using 'BNKA-BANKA'
 t_upload-BANKA_026.
perform bdc_field using 'BNKA-PROVZ'
 t_upload-PROVZ_027.
perform bdc_field using 'BNKA-STRAS'
 t_upload-STRAS_028.
perform bdc_field using 'BNKA-ORT01'
 t_upload-ORT01_029.
perform bdc_field using 'BNKA-BRNCH'
 t_upload-BRNCH_030.
perform bdc_field using 'BNKA-SWIFT'
 t_upload-SWIFT_031.
perform bdc_field using 'BNKA-BGRUP'
 t_upload-BGRUP_032.
*----- insertion ends
perform bdc_transaction using 'FI01'.
REFRESH : I_BDCDATA.
CLEAR : WA_UPLOAD.
ENDIF.
ENDLOOP.
ENDFORM. " f_do_transaction
*& Form bdc_dynpro
For appending screen details to BDCDATA
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. "bdc_dynpro
*& Form bdc_field
For appending field details to bdcdata table
FORM bdc_field USING fnam fval.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_transaction
For inserting Transaction in the session
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'FI01'
TABLES
dynprotab = i_bdcdata.
ENDFORM. " bdc_transaction
*& Form F_close_group
For closing the session created in Session manager SM35
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
concatenate 'Session ' v_session 'successfully created' into v_field.
MESSAGE v_field type 'I'..
CALL TRANSACTION 'SM35'.
ENDFORM. "f_close_group
*& Form f_give_help
For user help to select file
FORM give_help.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_give_help
---- End of Template -

Actually, there is no need for the dataset statemant at all. Comment that out, and add a line that moves the data from wa_upload to t_upload, or you could change the rest of the references to point to wa_upload and forget about t_upload. Your choice.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
*read dataset wa_upload into t_upload.
*f sy-subrc <> 0. exit. endif.
t_upload = wa_upload.
Regards,
RIch Heilman

BAPI to upload data from a flat file to VA01

Hi guys,
I have a requirement wherein i need to upload data from a flat file to VA01.Please tell me how do i go about this.
Thanks and regards,
Frank.

Hi
previously i posted code also
 Include YCL_CREATE_SALES_DOCU *
 Form salesdocu
 This Subroutine is used to create Sales Order
 -->P_HEADER Document Header Data
 -->P_HEADERX Checkbox for Header Data
 -->P_ITEM Item Data
 -->P_ITEMX Item Data Checkboxes
 -->P_LT_SCHEDULES_IN Schedule Line Data
 -->P_LT_SCHEDULES_INX Checkbox Schedule Line Data
 -->P_PARTNER text Document Partner
 <--P_w_vbeln text Sales Document Number
DATA:
lfs_return like line of t_return.
FORM create_sales_document changing P_HEADER like fs_header
 P_HEADERX like fs_headerx
 Pt_ITEM like t_item[]
 Pt_ITEMX like t_itemx[]
 P_LT_SCHEDULES_IN like t_schedules_in[]
 P_LT_SCHEDULES_INX like t_schedules_inx[]
 Pt_PARTNER like t_partner[]
 P_w_vbeln like w_vbeln.
This Perform is used to fill required data for Sales order creation
perform sales_fill_data changing p_header
 p_headerx
 pt_item
 pt_itemx
 p_lt_schedules_in
 p_lt_schedules_inx
 pt_partner.
Function Module to Create Sales and Distribution Document
perform sales_order_creation using p_header
 p_headerx
 pt_item
 pt_itemx
 p_lt_schedules_in
 p_lt_schedules_inx
 pt_partner.
perform return_check using p_w_vbeln .
ENDFORM. " salesdocu
 Form commit_work
 To execute external commit *
FORM commit_work .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
 WAIT = c_x
ENDFORM. " Commit_work
Include ycl_sales_order_header " To Fill Header data and Item data
Include ycl_sales_order_header.
 Form return_check
 To validate the sales order creation
FORM return_check using pr_vbeln type vbeln.
if pr_vbeln is initial.
 LOOP AT t_return into lfs_return .
 WRITE / lfs_return-message.
 clear lfs_return.
 ENDLOOP. " Loop at return
else.
 perform commit_work. " External Commit
 Refresh t_return.
 fs_disp-text = text-003.
 fs_disp-number = pr_vbeln.
 append fs_disp to it_disp.
if p_del eq c_x or p_torder eq c_x or
 p_pgi eq c_x or p_bill eq c_x.
 perform delivery_creation. " Delivery order creation
 endif. " If p_del eq 'X'......
endif. " If p_w_vbeln is initial
ENDFORM. " Return_check
*& Form sales_order_creation
 text
 -->P_P_HEADER text
 -->P_P_HEADERX text
 -->P_PT_ITEM text
 -->P_PT_ITEMX text
 -->P_P_LT_SCHEDULES_IN text
 -->P_P_LT_SCHEDULES_INX text
 -->P_PT_PARTNER text
FORM sales_order_creation USING P_P_HEADER like fs_header
 P_P_HEADERX like fs_headerx
 P_PT_ITEM like t_item[]
 P_PT_ITEMX like t_itemx[]
 P_P_LT_SCHEDULES_IN like t_schedules_in[]
 P_P_LT_SCHEDULES_INX like t_schedules_inx[]
 P_PT_PARTNER like t_partner[].
 CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
 EXPORTING
 sales_header_in = p_p_header
 sales_header_inx = p_p_headerx
 IMPORTING
 salesdocument_ex = w_vbeln
 TABLES
 return = t_return
 sales_items_in = p_pt_item
 sales_items_inx = p_pt_itemx
 sales_schedules_in = p_p_lt_schedules_in
 sales_schedules_inx = p_p_lt_schedules_inx
 sales_partners = p_pt_partner.
ENDFORM. " sales_order_creation
plzz reward if i am usefull plzz

I need a text area that is displayed after

I need a text area that is displayed after the user has entered value in parameters textboxes.
Assume that I have to parameters area and when the program run, they are displayed and ready to get input.
My problem is after that: When the input has been got, I want to display them in a text area like label in c#....
Is it possible?
Thanks for everyone who answers.
Deniz.

Hi,
could you give us more info about this ?
Does the text area has to appear in the selection screen, or in the next screen ( list processing ) ? Why would you like to show a label ?
thanks,
Rolf

TS3694 iphone needs restore itunes says enter passcode to phone

my iphone screen came out and now it says it needs a restore plug it in to itunes and it says enter passcode to phone i cannot do this as it is emergencie calls only

Hey drcajkm,
Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

I need to upload data to icloud;display nor wrkg so cant enter passcode?

Similar Messages

Maybe you are looking for