I need to use agilent34970A with serial cable;but i'm not able to build a routine.

Hi, i'm learning labview and i'm not able to build a routine to communicate with my Agilent34970A with serial cable only and to use the data. Anyone can help me? thanks. lucky

Are you using the driver from the LabVIEW Instrument Driver CD or that you downloaded from here? If you are, what problems are you having? Are there error codes generated and what are they? Have you verified that the serial cable is correct and the the comm parameters (baud rate, stop bits, etc.) are the same in the program and the instrument?

Similar Messages

I recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !!

i recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !! i have tried everything i.e. reset iphone /hard reset/network setting reset /sms service no i have also changed but i am still not able to send sms.. please help me as i am really worried .. thank you !!

I had the same problem. Kept getting message of waiting for activation or check network connections. I also tried every solution out there and nothing worked. This did though: I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work). It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer. I let itunes find it, did a complete backup in icloud, then did a restore. Entire process took a couple of hours, but I now have imessage and facetime back. I was about ready to give up on Apple and go get a different phone ~

Need to use hyperlink with tracking code in Edge project, not working

I have been using test URL's inserted on invisible "hot spot" elements in my edge animate project that have been opening fine in the browser. Now I need to update those URLs with tracking syntax, but when I change it in Edge (replace the URL in the actions panel for that element) and then run the animation in the browser, the link will not open.
Any thoughts or suggestions?

Never mind, the URL itself had quotation marks that needed to be removed; once that was done the URL's opened properly.

HT4642 I use numbers with excell 2010, but it does not show the drop tabs, just a number, is this fixable?

I have a iphone5 and trying to use numbers with it, I use excell 2010, but it will not transfer the dop down boxes on excell 2010. Is this fixable or what?

Welcome to Apple Support Communities
The first Mac with Thunderbolt was the Early 2011 MacBook Pro. If you have got a 2010 MacBook Pro, you have got Mini DisplayPort instead of Thunderbolt, which are the same, but Mini DisplayPort can't be used to connect external disks.
To check which MacBook Pro you have, open  > About this Mac > More Info, and you will see the MacBook Pro model. If it's Mid 2010 or older, you haven't got Thunderbolt, so you have to connect the external drive through USB

We are 2 to use itunes at my house but i'm not able to sync my ipod on itunes because it's always the music and the info of my grand father ...

i try to syncronise my ipod but it's not wor; i just see the music of my grandfather and his account! i don't want to go on itunes store i want to see my music and my ipod's informations on itunes. help me please im discouraged

Refer here:
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495

I purchased LR4 a few years ago and I want to download to new computer. The product is in my Account with Serial Number, but I do not find any place on the site to actually download it. Can anyone help

I am unable to find download instructions for LR4 which is listed in my Adobe ID with the Serial Number. Can anyone tell me how to download it to a new computer. I have CS6 and those instructions for downloading an owned product are easily found.

John
Many Thanks; I did finally manage to run into it on the website, but this is link is much better.
Happy Thanksgiving.
John Rupley

To access a particular website , I need to use Java 6 u 37, but Firefox will not allow me to enable it since it is outdated. How can I do it?

I have downloaded Java 6 update 37, but Firefox does not recognize it as a valid plug-in, and so will not even give me the option of enabling it. Is there any workaround for this?

Firefox is a 32 bit application, so make sure that you've installed the 32 bit Java program and that Firefox can find its plugins.

I bucked up my files with Time Machine, but I am not able to see my pictures from the external hard drive

Hi all,
When I open the iphoto library in my hard drive, its says that I have to open iphotos with the "control" option. So I did it and opened a "different library" and try again to do it from the extrenal drive, but again, its says the same thing. Please help! I would like to be sure all my back ups pictures are there and be able to watch them
Thanks in advance!

A Time Machine backup of the iPhoto Library is not useabel by iPhoto until you Restore it with Time Machine. To restore the library go into Time Machine, go to the date you want, located your Pictures folder, select the library and use the Restore button.
Be warned that this will overwrite your current library so if it's just a test select Save Both in the window that comes up.
OT

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
Apple is becoming more like Microsoft every day.

HT200006 iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..

iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..I also update everything using a Mac mini and latest iTunes version and 8.1.3 iOS on iPod touch any help will be really appreciated also try different computer like a macbook pro no luck.

See if yo missed anything here:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT201441 I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but st

I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but still no go. How do I activate ipad mini with my iTunes ID.

delete the email account and try again

Material Movement using BAPI with serial number.

Hello,
I am currently doing material movement using BAPI with serial number management, however in some case it works fine and in some cases it given and error message E213(IO). Unable to find the reason, when simulated the same it works fine for 200 serial numbers and gives error when going above 200 serial number. The confusion is some times it works fine for 3000 serial number as well.
Tried finding the reasion on every possible site. No results.
Thanks in advance for some solution.

Hello,
I am currently doing material movement using BAPI with serial number management, however in some case it works fine and in some cases it given and error message E213(IO). Unable to find the reason, when simulated the same it works fine for 200 serial numbers and gives error when going above 200 serial number. The confusion is some times it works fine for 3000 serial number as well.
Tried finding the reasion on every possible site. No results.
Thanks in advance for some solution.

HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad. One code in the spreadsheet says it's already been used but shows no serial number or device name.

I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Problem with serial number! It is not valid!

Hello,
i'm Italian and recently I downloaded the trial version of Flash Professional... when the 30 days ended I was asked to fill in a serial number! And that's the problem: my teacher gave me several serial numbers but they are not valid!
Please, speak Italian if you can! If not no problem! I'm fluent in English too!
Aleandro

Cloud programs do not use serial numbers... you log in to your PAID Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

I need to use agilent34970A with serial cable;but i'm not able to build a routine.

Similar Messages

Maybe you are looking for