I need two query in one report (two detail section in one query)

Hi master sorry for again distribute
Sir I need two query in one report
Because I need two detail section in my one report
Such as
Master
Vno=9088989
Detail          1
=
=
==
=
Total                     99999
Detail          2
=
=
==
=
Total                     33333
Sir how I get this type of report
Please give me idea
Thanking you
Aamir

I want to see the report as follow.
d_name: CPU-1
date: -----------
Software installed:
sw_id, software, version, serial_no, sw_type
(list of softwares attached, can be more then one)
Hardware attached:
hw_id, hardware, specification (same like software list, it will contain hardware list attached to specific device),
Please if you can help me that how will i make a query for this.
Thanks and Regards
Maz

Similar Messages

  • Keep Together when we have two detail sections

    Post Author: achaithanya
    CA Forum: General
    Hai,
    I have two Detail Sections and when you look at the report data is split and is displayed in two pages. It should be  together. If we have single section then we use Keep Together option. I have tried with this option also.
    1st page end
    AAAA
    BBBB
    aaaa
    bbbbb
    2nd page start
    cccc
    dddd
    Data should not split as above and it should displayed in any one of those pages.
    Thanks in advance,
    Regards,
    Chaithanya.

    Post Author: [email protected]
    CA Forum: General
    keep together is good for that section only. unless there is a parent section that you could turn keep together on,  i don't know of a way

  • Crystal report with Details section

    Dear All,
    I design one Crystal report. In that can we add Details section below the Report footer.
    When i add Details section it is adding below Details section like Details a and below Details b.
    I want this Details b section adds below Report Footer. Can anybody suggest me how to add that is ?
    Thanks and Regards

    Dear Friend,
    Thnks for reply. In my Crystal report i added two page header like Page header a and Page header b.
    In Page header a i shows the heading of columns and in Page header b also i am showing the headin column. Coz my all columns name not fited in one Page header. Tha's y i taken two Page header.
    Now i also added two Details section for takeing multiple value from database. Like Details a and Details b. But it is showing one by one.
    I want to show record in details section of specific column. Like following design. Can u plz tell me how to design ?
    Page header a    GCN/Invoice      GCN ...................
                                Date                 No.
    Details a             11/12/2008      1
                                13/12/2008       2
    .........Page header b       Destination        Tanker
                                                                      No.
             Details b                  Pune              125469
                                              Mumbai          566862
    Thanks and Regards

  • Cross Tab report in details section

    Hi All
    I am new to Crystal Reports and have a few queries related to a cross tab report. I am trying to design a report as follows
    Rows: Cost elements
    Columns: 12 months,YTD and Total Year for Actuals & then 12 months,YTD and Total Year for Budgets
    Gruop By: Cost Centre
    For Example;
                                                           Actual                                            Budgets     
                                   Apr  May  June  July.....YTD  FY2010   Apr  May  June  July.....YTD  FY2010
    Manpower Cost
    Rent
    Total Cost
    1.  Since I need the above table for every individual cost centre, is it possible to group by Cost centre and then build a cross tab report in the details section?
    2. If not, is there any other way by which I can create the above table without using cross tab?
    3. For the YTD values, should it be calculated in the BW query (I am using BW queries as the datasource) or in Crystal Reports? and how?
    Thank you very much. I would appreciate your early response.
    Payal

    Hi
    Thanks for your inputs. Currently I have designed my report in the same way (group by cost centre & cross tab in group header section). However, I am still looking for a way to calculate YTD & Quarter values in Crystal using a formula. I am debating whether it should be calculated in BW or in Crystal.
    Thanks
    Payal

  • Passing Parameter to sub report from detail section of Main report

    I am new to CR
    I am developing a CR for Clinical Lab Test. My main report have four field i.e
    1. Test Code
    2. Test Name
    3. Result Value
    4. Normal Values
    This report has sub report in Page Footer. When TestCode = 18 or 19 It has to show a normal value table in Page footer of that page. Other wise this table should not appear on page footer.
    Please help me

    Hi Qasim,
    Go in Section Expert and select the page footer.  You will find Suppress in right side of the window, go in formula editor and give the follwoing formula :
    If Testcode<> 18  or Testcode <> 19 Then true
    Thanks,
    Sastry
    Edited by: Sastry Duvvuri on Oct 14, 2008 7:10 PM

  • How to fix the height of the details section in crystal reports.

    hi all
    How to fix the height of the details section in crystal reports.

    Thanks for your reply
    i didnt get the clear idea about your answer can you explain it once with example
    why iam asking is when i add a new details section according to you answer maintaining same height of the two details sections and i see the preview the iam getting gap between each record. this is so because one record from details section1 and another empty space from details section2
    like
    Details section A-contains records
    Details section B- no records
    Details section A-contains records
    Details section B-no records
    Then how will i solve my issue
    Thanks in advance

  • Creating a custom report with detailed header and then associated detail

    I am very new to CRMOD, so this question may be basic, but I have not found any good material yet to help me out, so here goes.
    We are trying to create a Quote report that will be sent to our customers. The report needs to have both a header and detail section basically as follows:
    <Header>
    Quote Form
    Date:
    Expiration Date:
    Sales Person Name:
    Customer Name and address
    Terms
    ... some other text data ...
    <Detail>
    Standard fields that define the quote, these are easy.
    What I cannot determine how to do is create the header section. In the report designer, it only allows for a Title, logo, and another text line. Can anyone suggest another method?

    I do not have the narrative option.
    Options available are:
    Title
    Table
    Chart
    Pivot Table
    Gauge
    Active Filters
    legend
    Advanced
    --> Column Selector
    --> View Selector
    --> Funnel Chart
    --> Ticker
    According to the documentation, the narrative view should be available from the advanced menu. Am I on a different package by chance?

  • Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Good day!
    A simple Paste does not work for you?
    It should place the clipboard content as a new Layer which you can then move around.
    If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
    Regards,
    Pfaffenbichler

  • Do we need two ports for establishing one connection to EJB from swing clie

    Hi all,
    I have an application which uses Java Swing client and accesses an EJB to connect to the server.
    I am connecting to the EJB using iiop://server-ipaddress:port.
    It is required for me to open the firewall to access the above specified ip address and port number. Even though, I am able to access the specific ip address and port number, I am not able to establish the connection.
    I tried out to check the porblem and I came to know that, this aplication is trying to open another port also on the same IP address.
    I am just wondering whether we need two ports for one connection.
    Does anybody face this type of problem?

    If you need to access on two ports, you would have to open both :)

  • I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?

    Tango Remote Control Music Player HD
    I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?

    An iPod touch is an iOS device.
    Why not contact the developer of the app?

  • Creating a Master with Two Detail report style

    In a Group-Above report data model, how does one add a 2nd detail group appearing at the same hierarchial level as the 1st group?
    The report already exists with MASTER and detailA. I need to add detailB and tie it to MASTER just like detailA.
    |MASTER|
    |detailA||detailB|
    \-------/\-------/

    Amjad,
    Thanks for the reply. My question relates to your suggestion #1: How does one create detailB in the data model?
    The only thing I have been able to do is to create a 2nd query linked to the 1st query. This makes the data model look like it has two masters each with one detail. What I want is a single MASTER with two details.
    Are you suggesting that the only way to accomplish this is by having two queries, one linked to the other, as in the crude rendering shown below?
    |MASTER1||MASTER2|
    |DETAIL1||DETAIL2|
    The above would be displayed in the data model as follows:
    |__Q_1___||__Q_2___|
    |G_DETAIL1||G_DETAIL2|
    \----------------/\----------------/

  • Need two different reports_path in AS 10g

    Hi,
    I have AS 10g with one Report-Service and
    I do need two different REPORT_PATH for Testing and Production.
    I set the different REPORTS_PATH=xxx into the different xxx.ENV ,
    but it doesn't work,
    the Reports_Path is setting from the registry REPORTS_PATH.
    what is a way to set reports_path dynamic ?
    do I need a REPORTS_CLASSPATH in the xxx.ENV
    or can I assign the REPORTS_PATH to rp2rro.pll ?
    Norbert

    Thank you,
    set the different env in reports-config works.
    But the next is:
    I do use RP2RRO library and a param_list to start the report with rwservlet :
    RP2RRO.RP2RRO_RUN_PRODUCT (REPORTS,p_ReportName, SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
    and would like to use this to give the report the env with the RP2RRO-Service rp2rroReportOther:
    RP2RRO.setOthers('ENVID=TEST');
    But it doesn't work, and I think the reason is, that RP2RRO.setOthers doesn't work
    with param_list : "You cannot use rp2rroReportOther with parameter lists"
    (rp2rro.pll version is from 2002 )
    what to do ?
    can I change the RP2RRO to set RP2RRO.setOthers('ENVID=TEST') WITH param_list ?
    Regards
    Norbert
    'will create a new thread
    Message was edited by:
    astramare

  • Open document syntax for  opening of two detail reports at the same time

    Hi All,
    I have one summary report   and two detail reports (sales detail Report  and Activation Detail Report)  In summary report I have serial number  when I click the particular serial number in summary report I need to display two detail  reports at the same time is  it possible to do In Business objects webintelligence 3.1
    I am using webi 3.1  , please suggest me any one how it do u2026u2026?
    Thanks in Advance!!!
    Regard,
    Sreekanth.

    while forming the link, try using java script.
    the html can be like:
    <html>
         <A href=" j avascript:window.open('http://www.google.com','','');j avascript:window.open('http://www.yahoo.com','','');">
              Click Here
         </A>
    </html>
    In place of # write (as I am not able to paste the code):
    javascript:window.open('http://www.google.com','','');javascript:window.open('http://www.yahoo.com','','');

  • When do we need two or more sales organization

    Hi Experts,
    In our Enterprise Structure, what factors decide that we need two or more sales organisations. What business requirement makes the decesion of this, any examples may really help.
    Increase of master data is fine but what is the actual reason behind having to restrict with simple org structure ??
    Pre- Thanks
    Denish

    I don't think you need more than one sales area for one country under one company code.
    B'coz most of the things can be handled through or can be differentiated on the bases of Sales Area.
    To add further, its just a virtual organisation entity without any legal boundness.
    All sales related rule regulation for one country should be perferably under umberalla.
    More that one sales org without a valid purpose will just add to complexity of the enterprise structure (simple the better)
    So I don't is any specific requirement of having more than one sales organiation for one country under one company code.
    Untill you need:
    - reporting in more than one Statistics currency.
    - different Sales organisation calendar
    Regards
    JP
    One question for our fellow respondents:
    Whether
    - pricing
    - payment terms
    - target customers/customer base
    - Product line
    - area of operations
    is enhancing the sales org is the only alternative or will add to the complexity?

  • Ultranav Driver 16.2.14.0 needs TWO reboot to function

    I just want to report the following things about the latest Ultranav driver 16.2.14.0:
    1. Thankfully, the non-working middle-click button bug (when set to "None"), is resolved. Previously in the last few drivers it wasn't working properly. It pretty much meant removing the middle button from my laptop, since it was forced to scrolling mode because of some bug and I simply couldn't middle click. I was forced to use driver from Synaptics to fix it. Glad now I can use Lenovo driver!
    2. However there is a bug with this driver, that it needs TWO restarting to function. Upon the first restart, Fn + F8 gives an error, and the TrackPoint sensitivity is always set to hardest, and no matter what you set in this windows session, it will disappear upon the next reboot.
    After the 2nd reboot, it works perfectly. Fn + F8 opens the moust dialog (no utility software installed), and the settings function properly.
    Using a W520

    Hello noochi01,
    I found another "problem" in my first XP installation... some years ago I learned to press F5 during the first WinXP setup screen (where it says "press F6 for storage controller...") in order to manually select "ACPI-PC" as the PC type. Otherwise sometimes the non-ACPI HAL would be installed due to some crappy ACPI BIOSes which results in the "You may now switch off the computer" message instead of power down.
    This manual ACPI-PC selection was what I also did when I first setup XP SP3 on the T61p... now I noticed the machine runs on only one of the 2 CPU cores. Cause is that the selection of "ACPI-PC" will install the uniprocessor XP kernel:-/
    So I now did another clean setup with selecting "ACPI multiprocessor PC" => multiprocessor kernel is installed and both CPU cores are used. With this setup I don't have problems with either the original UltraNav 13.x driver or the Ricoh SD/MMC host controller driver.
    I'm very unsure if the uniprocessor kernel in the first installation caused these driver problems or if I simply installed the drivers in a different sequence this time... but there's no freeze until now.
    Can you check if both CPU cores are active on your machine? E.g. the Windows task manager shows two graphs for CPU usage, two frequencies are shown in System Properties etc.?
    btw: The 3.57.01 Ricoh drivers from the ASUS website seem to work well for the ThinkPads with that Ricoh 4-in-1-controller: http://dlsvr.asus.com/pub/ASUS/nb/Drivers/Cardreader/CardReader_Ricoh_VT_090513.zip
    I don't know why Lenovo did never release that driver update?! On the Ricoh page there are no downloads for "industrial products"... and that controller seems already outdated.
    Cheers,
     Wolfgang

Maybe you are looking for