I need upgrade assistance.

My husband needs a new phone for work and I just upgraded mine.  He needs a smart phone but has a year left on his current contract.  Can we add another phone (smart phone) to our account for the $10.00 per month and him use that phone with his old number as long as we continue to pay for the other one that is still under contract????  Just wondering what is the best way to do it to keep from paying $500 for a new phone.  He has to keep his old number.  Please help.

mommyof4four wrote:
My husband needs a new phone for work and I just upgraded mine.  He needs a smart phone but has a year left on his current contract.  Can we add another phone (smart phone) to our account for the $10.00 per month and him use that phone with his old number as long as we continue to pay for the other one that is still under contract????  Just wondering what is the best way to do it to keep from paying $500 for a new phone.  He has to keep his old number.  Please help.
If you have 4 or fewer lines on your account, you can add a line and purchase a smartphone on it. Once you purchase it and set it up, you can activate it on HIS line (thus deactivating his current phone) and put his old phone on the newly added line (a line cannot be left without a phone on it) If his current phone does not require a data plan, you will pay the $10 a month for the added line. The ETF for cancelling the added line would be $350 minus $10 for every completed month since you purchased a smartphone on the line.

Similar Messages

  • SPAM Update needed for Upgrade Assistent

    For updating a SAP System (IDES 4.7) I assume I need the Upgrade Assistant!? I installed the UA-Server and connected with a browser to the local Service (http://x.x.x.x:4239/ua/UaGUI.html). After a few steps in the phase "PREPARE", the assistand is running into the following error: "The SPAM Version 15 of your system is too low!!!". I downloaded the newest SPAM-Package and unpacked it. The resulting files are "CSR0120031469_0026199.ATT" and "CSR0120031469_0026199.PAT". I copied them to \usr\sap\trans\EPS\in but the error still appears...
    Any hint how to get 'em working? Am I totally wrong with this solution?

    Hi Thomas
    I think for upgrading an IDES system you need to install it again. Anyway , this note 164244 says you can ask SAP for an upgrade if necessary.
    Regards
    Jose Luis Valverde

  • Re XP expiry - Windows upgrade assistant refers me to you for Acrobat advice. What do I need to do?

    re XP expiry - Windows upgrade assistant refers me to you for Acrobat advice. What do I need to do?

    I don't know. What version of Acrobat do you have, what OS are you now running, and what does the message say?

  • UPGRADE ASSISTANT QUESTIONS for ECC6.0???????911

    I have used upgrade assistant in the past for 4.6C and 4.7 upgrades and had no problems.  I am having trouble getting the assistant to work through the internet browers.  I need help with a couple of questions:
    First:  Do I need do a prepare and SERVER option like I had in the past with R3UP?
    Second:  Is there anything special that needs to be done for ports 4239,4240,4241. I can reach my server through the internet of some of the ports that R3 uses.
    It seems the java is not recognizing my i5 server and I am not sure where the disconnect is. 
    This is the error I am receiving when I try to start the upgrade assistant:
    ERROR:  Unable to load resource: http://sapdev:4239/ua/uagui.jnlp
    <!--
    JNLP File for UaGui
    -->
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp spec="0.2 1.0" codebase="http://SAPDEV.SWIRECC.COM:4239/ua" href="uagui.jnlp">
      <information>
        <title>Upgrade Assistant</title>
        <vendor>SAP AG</vendor>
        <description kind="short">SAP Upgrade Assistant</description>
        <icon href="http://SAPDEV.SWIRECC.COM:4239/ua/pics/sdtgui_big.gif"/>
      </information>
      <security>
        <all-permissions/>
      </security>
      <resources>
        <j2se version="1.4+"/>
        <jar href="uagui.jar" main="true" download="eager"/>
      </resources>
      <application-desc main-class="UaGui">
           <argument>-host</argument>
           <argument>SAPDEV.SWIRECC.COM</argument>
           <argument>-port</argument>
           <argument>4241</argument>
      </application-desc>
    </jnlp>

    Usually it's done like
    - PREPARE
    - exchange SAPup with the newest version
    - add your application fix <application>_FIX to /usr/sap/put
    - $JAVA_HOME/bin/java -cp /usr/sap/put/ua/ua.jar UaServer
    - give an administrator password
    After that the UA should listen on port 4239
    You can verify that on the machine via
    netstat -tn | grep -i LISTEN | grep 4239
    Also check that you have either no proxy or add the box' name to the exception list of the browser (because Java uses that exception list too).
    Markus

  • Upgrade from 8i to 9i using Database Upgrade Assistant

    Hi
    I installed 9i on a server that already has an 8i database. I am trying to use the upgrade assistant in 9i to convert the database to 9i. After selecting the 8i db, I get dialog saying 'Getting databse information. Please wait..' then error 'ORA-12560: TNS:protocol adapter error'. I tried setting the 9i listener to a different port (1522) and restart listener, no luck. Any suggestions?
    Thanx

    You need to try the database forum, whose ID i think is 145
    All Oracle database upgrade stuff will be handled there
    Barry

  • Do you run Pre-Upgrade Assistant when migrate from 10.1 to 10.2

    Hello,
    I tried to upgrade from 10.1 to 10.2 on Windows. Base on installation guide, you have to install 10.2 in a separate ORACLE_HOME, then run utlu102i.sql through SQL before run DBUA. Since I installed 10.2 without create start database because SID is same as 10.1. How to run pre-upgrade assistant? Or should I setup new SID for 10.2 and change it back after migrate database from 10.1 to 10.2.
    Your assistance will be appreciated,

    I'd suggest to check the "manual upgrade/migration" method described in upgrade doc.
    As a summary:
    utlu102.sql is just a step to verify some prereqs needed before going to 10.2
    You'll need to shutdown your 10.1 DB. Copy your .ora files from 10.1.to 10.2; adjust them appropriately.
    Set your Oracle_home to 10.2; keep same SID. Startup upgrade, then run catpatch.sql (if i remember correctly).
    All these steps are well described in the manual.

  • 9.0.4 OID Upgrade Assistant - Infrastructure  install ora-00911

    Hi,
    upgrading from 9.0.2 to 9.0.4 on windows server.
    Configuration assistant failed on Internet Directory Upgrade Assistant
    output:
    Non-SSL port:4032
    4031
    java.sql.SQLException: ORA-00911:invalid character
    My upgrade is sitting here going nowhere and my searches have not yielded an answer - any assistance would be very much appreciated
    Thx, Pat

    Hi Mojo,
    There is no direct upgrade path fro 9.0.4 to 11g as you have OID involved so that latest being 11.1.1.7.0.
    In order to upgrade Oracle Application Server to 11g the first step is to upgrade the 9.0.4 to 10.1.2.3 which is a manadatory prerequisite.
    So in-order to get Oracle Application Server 10.1.2.0.2 you need to create an SR with Shipment team as 10.1.2.0.2 is de-supported since Jan 1st 2012 and the download the path "5983622" to upgrade
    10.1.2.0.2 to 10.1.2.3.Once the upgrade is successfull then you need to proceed to to 11g upgrade.
    Also there are some limitations of using Application Server 10.1.2.3 on DB 11gR2 for which please review the note:887365.1 "Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)"
    Regards,
    Prakash.

  • Cannot Start Prepare from Upgrade Assistant GUI

    Guys,
       We have completed test,DEV upgrade using Upgrade assistant GUI but now during Production upgrade we cannot start Prepare using GUI but we can run from SCROLL Mode.
    I am able to open assistant GUI and enter username and password then next screen comes up. Then when I try to open Administration --> Start Prepare it does nothing even connect to SAPup does nothing. Then I need cancel GUI using task manager.
    Please help Urgent
    Thanks
    Santosh

    Hi ,
    1.Once you run  /<DVD mount directory>/PREPARE  , choose method EXIT (default value)
    2.Start the UA server ( use nohup to run UA server in background to avoid the uncessary termination , for example, network errors etc., )
    3.  a) Starting with browser ,
    http://<host name>:4239 ( use full qualified hostname)
    b) copy the uagui.jar file from directory
    <upgrade directory>/ua on this host to any local  directory.(local system - windows)  and run
    java -cp <UaGuiDir>\uagui.jar UaGui
    4.If system is Unix , try
    java -cp <upgrade directory>/ua/uagui.jar UaGui

  • Software upgrade assistant launches IE

    Please help!  Everytime I plug my phone into my computer, the Verizon Software Upgrade Assistant starts Microsoft's Internet Explorer and loads a verizon web page.  I can't find any way to stop this from happening.  I don't use IE because it's too great a security risk.  I don't appreciate Verizon malware loading this program without my permission.  I also don't need and don't want to see Verizon's web page everytime I plug in my phone.  I tried removing the Software Upgrade Assistant, but then I get the "Software available for your phone" pop-up instead.  How can I prevent my system from starting IE everytime I plug in my phone?

    Bearone21,
          Thanks for your message.  My PC still connects to the internet
    just fine, but everytime I plug the phone into the USB port, the new
    software launches Internet Explorer (on the PC) and loads Verizon's
    Consumer Products web page.  There are two problems with that.  First, I
    don't use Internet Explorer because of it's inherent security risks and
    I don't want it running on my machine.  Second, I don't care to be
    spammed with the Verizon Consumer Products page every time I plug my
    phone in to sync it or charge it (several times a day).  I was hoping
    there was an option to turn this "feature" off.  A simple options menu
    box that would let me choose between "on connect launch browser." and
    "on connect do nothing" would be sufficient.  I've reviewed all the
    options and this choice doesn't appear to be available, hence my question.
          Note that this never happened until I did the 4.3 upgrade, so I
    have to assume it is another one of the several defects in the upgrade
    package.  There are a couple of simple ways to fix this defect.  The
    first, and best way, is for the software to give me the option to
    launch, or not launch Verizon's consumer products web page on USB
    connect.  That would solve the problem completely.  Failing that, the
    Verizon software should use the system default browser instead of
    launching IE. That might still be annoying, but at least it would
    resolve the security problem.
          I appreciate your response to my inquiry and hope that Verizon and
    Samsung will continue working together to fix the many problems with the
    4.3 upgrade.  Hopefully Verizon will recognize that the browser market
    has changed and IE users account for less than 23% of the browser market
    today (see http://en.wikipedia.org/wiki/Browser_wars).  Verizon needs to
    adapt to the new browser climate and stop writing software that is
    dependent on IE.
                   Thanks again,
    Dave *
    >>Personal information removed to comply with the Verizon Wireless Terms of Service<<
    Message was edited by: Verizon Moderator

  • "NOT solved" CO needs upgrading, can't provide the service I'm paying for.

    For the record, I accepted the solution to my original post as advised by support, in an effort to be able to unlock the original post but it didn't work.
    Please review the original post "CO needs upgrading, can't provide the service I'm paying for." for the beginning details of my issue.
    Here's the update and final word from Verizon....
    Worked on the issue in private support from 2/28/13 to 3/15/13. I was told my issue was submitted to the DSL escalation team & engineering group. I was told that it is a capacity issue at the CO, where upgrades are needed, so at the present time there is nothing more they can do until the upgrades are completed.
    Needless to say, I'm not happy. Now I'm currently looking into compensation in the form of some type of reduction in my monthly fee until the issue is resolved at the CO and I'm able to get the speed I'm provisioned. Wish me luck this is my last option.
    As I stated in my original post, I really have had a good relationship with Verizon up until now. Unfortunately, I'm not seeing a light at the end of the tunnel so I may have to make a change. I'll update this if anything changes

    This is probably my final update...
    I received a voice message in regards to my request for some compensation but there was nothing Verizon can do. The info given was that there was no estimated time for the upgrades to be completed. The offer was to down grade my plan to a lower provisioned speed & pay a lower rate. For both, it was not what I wanted to hear.
    I wanted to keep my plan & provisioned speeds. I am & have been happy with my service & speed(when it's where it should be), it just that I'm not getting what I pay for at all times. Since there is no estimated time for upgrades (so that I get those provisioned speeds) I was inquiring about a possible adjustment in my monthly fees(maybe a few bucks off per month) until the upgrades are done. So now as I understand Verizons stance, I need to continue to pay the full price & Verizon won't be providing my provisioned speed. That just doesn't sound like a fair deal.
    Unfortunately it appears that Verizon will now be loosing a long time customer, something I really wanted to avoid for the previously stated reasons. As I now look for an alternate ISP, I will continue to monitor my private support case in the hopes that something changes that will allow me to continue my relationship with Verizon as my ISP.
    I want to thank everyone for their assistance in trying to resolve my issue, you have all been professional, courteous & helpful(as much as you could have been) in our communications, Kudos to all.

  • Upgrade Assistant Administrator Password

    Hi,
    I need to reset the password of Upgrade Assistant NW2004s because the admin who start the project has left and no one know the password now.
    Do someone know how to do this ?
    Thank in advance,
    Alex

    Hi,
    I contacted SAP and they provide me a solution.
    It can be solved by deleted these two files : Ks and UAstate in \usr\sap\put\ua directory. After that, restart UaServer and provide a new password.
    I'm now confronted to a new problem.
    After giving to system the new admin password, i'm getting this error message from UA..
    UaServer> Stable storage file 'D:\usr\sap\put\ua\UaState' not found
    UaServer> Creating stable storage file 'D:\usr\sap\put\ua\UaState'
    Please enter administrator password
    Enter password:*********
    Confirm password:********
    *UaServer> Temporary directory is 'D:\usr\sap\put\ua'
    UaServer> Property file 'D:\usr\sap\put\ua\UaServer.properties' read
    UaServer> Configuring HTTP server
    UaServer> Using HTTP index file name: index.html
    UaServer> Signing JAR file uagui.jar
    *com.sap.sdt.engine.core.security.SecurityException: msg.diag.0002 java.util.zip.ZipException error i*
    +n opening zip file+
            at com.sap.sdt.server.core.security.SunJARSigner.signJARFile(SunJARSigner.java:311)
            at com.sap.sdt.server.core.security.SunJARSigner.signJARFile(SunJARSigner.java:294)
            at com.sap.sdt.server.core.security.SunJARSigner.sign(SunJARSigner.java:289)
            at com.sap.sdt.server.ext.r3up.R3upService.signJARFile(R3upService.java:676)
            at com.sap.sdt.server.ext.r3up.R3upService.<init>(R3upService.java:122)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
            at java.lang.reflect.Constructor.newInstance(Unknown Source)
            at com.sap.sdt.server.core.SDTServer.createService(SDTServer.java:252)
            at com.sap.sdt.server.core.SDTServer.startUaServer(SDTServer.java:126)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
            at java.lang.reflect.Method.invoke(Unknown Source)
            at com.sap.sdt.util.misc.MethodCall.invoke(MethodCall.java:80)
            at com.sap.sdt.util.misc.BootStrapper.start(BootStrapper.java:76)
            at UaServer.main(UaServer.java:367)

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Unable to run upgrade assistant utility in OIM 11.1.1.5

    Hi
    We are trying to upgrade OIM from 10g to 11g but when we run ua.bat(Located at MW_HOME/Oracle_<IDM_Home>/bin), we are getting the below error.
    C:\Oracle\Middleware\Oracle_IDM1\bin>ua.bat
    The system cannot find the path specified.
    FINDSTR: Cannot open C:\Oracle\Middleware\Oracle_IDM1\upgrade\temp\jdk_version.log
    Oracle Fusion Middleware Upgrade Assistant 11.1.1.5.1
    Log file is located at: C:\Oracle\Middleware\Oracle_IDM1\upgrade\logs\ua2012-03-05-19-01-12PM.log
    java.lang.UnsatisfiedLinkError: Can't load library: C:/Oracle/Middleware/Oracle_IDM1/oui/lib/win32/oraInstaller.dll
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1705)
    at java.lang.Runtime.load0(Runtime.java:770)
    at java.lang.System.load(System.java:1004)
    at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:1509)
    at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:50)
    at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:211)
    at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:213)
    at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:126)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:461)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:257)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:232)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:181)
    at oracle.ias.upgrade.OUIInventory.initAll(OUIInventory.java:86)
    at oracle.ias.upgrade.gui.UAWizard.init(UAWizard.java:446)
    at oracle.ias.upgrade.UpgradeDriver.gui(UpgradeDriver.java:276)
    at oracle.ias.upgrade.UpgradeDriver.main(UpgradeDriver.java:179)
    UPGAST-00055: error reading the Oracle Universal Installer inventory
    no oraInstaller in java.library.path
    But the folder created at the time of installation was C:\Oracle\Middleware\Oracle_IDM1\oui\lib\win64\oraInstaller.dll.
    We even modified ua.bat file to take the above path but no result.
    How to resolve the issue?

    Similar issue installing OIM 11.1.1.6 on Win7 64 bit:
    C:\Users\OIM_VM\AppData\Local\Temp>C:\Oracle\Middleware\Oracle_IDM1\OPatch\opatch apply C:\Oracle\Middleware\Oracle_IDM1\oneoffpatches\p7663342_111070_Generic.zip -oh C:\Oracle\Middleware\Oracle_IDM1 -silent
    Oracle Interim Patch Installer version 11.1.0.9.0
    Copyright (c) 2011, Oracle Corporation. All rights reserved.
    java.lang.UnsatisfiedLinkError: Can't load library: C:/Oracle/Middleware/Oracle_IDM1/oui/lib/win32/oraInstaller.dll
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1705)
         at java.lang.Runtime.load0(Runtime.java:770)
         at java.lang.System.load(System.java:1004)
         at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:1509)
         at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:50)
         at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:211)
         at oracle.sysman.oii.oiix.OiixEnvironmentOps.getEnv(OiixEnvironmentOps.java:53)
         at oracle.opatch.OUIReplacer.getEnv(OUIReplacer.java:374)
         at oracle.opatch.CmdLineParser.parse(CmdLineParser.java:970)
         at oracle.opatch.OPatchSession.main(OPatchSession.java:1314)
         at oracle.opatch.OPatch.main(OPatch.java:573)
    Installer stops on step 15 of 16. The task that fails is "Start Oracle Internet Directory"
    Did someone managed to overcome that issue ?

  • I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

    I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

    I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

  • Windows 8 installation - Upgrade Assistant compatibility Issue - Bluetooth Win7 Suite

    Having procured an on-line download of Windows 8, from the Microsoft web site, I am a little concerned about an incompatibility identified by the Microsoft
     Upgrade Assistant; namely:-
     "Bluetooth Win7 Suite (64) - Atheros Communications"
    This incompatibility was identified after restoration of an original copy of the Windows 7 operating system, as installed by the manufacturer of my PC! (Recovered from an Acronis image).
    That is, the operating system, prior to installation of any personal software, or external hardware, or divers!
    Hence, I can only assume, that "Bluetooth Win7 Suite (64)" is a sub component of one of the original components of the computer:
    ASUS P8Z68-V LE Motherboard
    NVIDIA Quadro 600 1024MB Professional Video Card
    Intel  i7 2600K Processor (3.4 GHz - no over-clocking)
    16GB Corsair PC3-12800 1600MHz DDR3 Memory (4x4 GB sticks)
    Qty 2 Sony 24x DVD-RW drives
    Qty 2 120GB Corsair Force 3 SSD (No Raid)
    Qty 1 1000GB 7200 HDD
    Onboard High Definition Audio
    My plan was to perform a clean installation of Windows 8, but I have no understanding what the implications of this incompatibility will be!
    Namely, what the function of  Bluetooth Win7 Suite (64), is! And what hardware it is associated with!
    Whether a clean installation will work, without  Bluetooth Win7 Suite (64)
    Whether Windows 8 install will have onboard drivers, for all of the above hardware!
    After installation of Windows 8, and installation of the manufactures latest drivers, for the Motherboard and Video Card, will I have to search elsewhere 
    for a driver for the Bluetooth Win7 Suite (64)
    I would appreciate any advice on this matter!
    Brian

    Hi,
    Based on my research, it seems that Bluetooth Win7 Suite (64) is a program developed by Atheros Communications.
    So, do you have any Bluetooth device? Did you install it?
    Please also check if it lists in Programs and Features.
    However, if you do not have any Bluetooth device or you do not use this program, in my opinion, it will not affect the installation of Windows 8.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

Maybe you are looking for

  • Add Variable in an existing planning layout

    Dear guys, I have a problem with planning in KEPM. in the planningslayout there was defined one variable for record type. We want to plan the figures for three record types. In the planning level I added those three record types but I am not able to

  • How do I get photos to my video timeline to be blue instead of purple?

    How do I get photos to my video timeline to be blue instead of purple?

  • Attachements do not appear.

    When I send email attachements from my work computer (Windows)  the attachments do not show up in my email on my MacBook Pro.  Is there a setting I need to change?  Thank you.

  • Web Service XMLA non WS-I compliant

    I tried to create a J2ME application using web service XMLA  but when I tried to generate the client stub with SUN Wireless Toolkit 2.2 an error occured: "The web service is not WS-I compliant" XMLA is not WS-I compliant ? XMLA not support J2ME ?

  • ME28 PO Release Icon not changing

    Hi all, I had one requirement that i need to add ten new columns in ME28 transaction. This i have achieved through an enhancement just before the ALV is Called i Have created a structure as standard one MEREP_OUTTAB_PURCHDOC_REL with the extra fields