I need user management system in PHP recommendations to work with Flex client side

Hi All,
I have a very big project that involves PHP server side (That i have to develop) and Flex client side. I was wondering it there is a ready made PHP user management system that i can use to provide me:
- user login/logout
- forgot my password functionality
- register (better with captcha)
Does someone can recommend this kind of php system?

Hi, guys
Free and open source PHP User Management Scripts. These scripts provide a solution of creating a membership system of a website.
Some PHP user management scripts listed on PHPKode.com. which you can choose the right php user management to meet your demands!
Hopefully can help you!
Best regards!
Anny

Similar Messages

PHP user management system

I have been using an ASP based user management system with an
Access
database and it has worked very well, however, I need to
implement a similar
system on a Linux server. I know you can password protect
sections of the
site using htaccess but I want something similar to what I
get with the ASP
system, ie user reg page and redirection pages for those who
enter wrong
details, duplicate usernames, password recovery, etc. Nothing
fancy, just
the basic functions to allow people to access restricted
areas of the site.
No payment will be involved, my client just wants to limit
access to certain
parts of the site to registered users.
Can anyone recommend something simple and easy to setup and
use? Either a DW
extension or standalone, bearing in mind I don't know PHP but
I can edit
code with a little guidance...
Many thanks in advance

DW has User Authentication server behaviors built in, you
know?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"polarl light" <[email protected]> wrote in message
news:g166m7$gvt$[email protected]..
>I have been using an ASP based user management system
with an Access
>database and it has worked very well, however, I need to
implement a
>similar system on a Linux server. I know you can password
protect sections
>of the site using htaccess but I want something similar
to what I get with
>the ASP system, ie user reg page and redirection pages
for those who enter
>wrong details, duplicate usernames, password recovery,
etc. Nothing fancy,
>just the basic functions to allow people to access
restricted areas of the
>site. No payment will be involved, my client just wants
to limit access to
>certain parts of the site to registered users.
>
> Can anyone recommend something simple and easy to setup
and use? Either a
> DW extension or standalone, bearing in mind I don't know
PHP but I can
> edit code with a little guidance...
>
> Many thanks in advance
>

I successfully reinstalled iWork, then got a msg that I needed to contact developer to be sure it works with my version -- which is 10.7.4

I successfully reinstalled iWork, then got a msg that I needed to contact developer to be sure it works with my version -- which is 10.7.4

tHi, I'm getting there -- but want to check to be sure the "Run" button got the results expected:
The last part of the "Run" log says:
ry to remove the apps bought from the Mac App Store :
"<startupVolume>:Users:<userAccount>:Applications:Keynote.app "
"<startupVolume>:Users:<userAccount>:Applications:Numbers.app "
"<startupVolume>:Users:<userAccount>:Applications:Pages.app "
set dossier_des_fichiers to path to applications folder from user domain as Unicode text
set liste_de_fichiers to {"Keynote.app", "Numbers.app", "Pages.app"}
tell application "System Events"
    repeat with un_fichier in liste_de_fichiers
        try
            delete disk item (dossier_des_fichiers & un_fichier)
        end try
    end repeat
end tell
--[/SCRIPT]
--{code}
Do you think "end try" and "end repeat" mean it was a successful undertaking?
If not, could I use MacKeeper to perform the same function?
I

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

How manage to get my apple TV2 working with a nas like buffalo live with iTunes server?

i will probably buy a buffalo nas.
does this solution work with my atv2 as a mass storage?
can i stream films from the nas to my hdtv via teh atv2?
how manage to get my apple TV2 working with a nas like buffalo...
best regards,
yves

Yalgee wrote:
ATV2 should browse shared iTunes libraries in the same network.
Problem started when ATV only supports Apple home sharing.
I agree it would be nice if it worked with these NAS based iTunes servers but it doesn't, so if that's a necessity you would be better off looking at a media player from someone else and not purchasing DRM protected incompatible content from iTunes.
AppleTv 1 did not use home sharing and it didn't work with NAS itunes either.
We really need an Apple branded NAS that could home share, either that or they need to license the technology to 3rd parties, but frankly I can't see either happening.
Running a computer 24/7 is not ideal and one area where AppleTV1 was better in that you could store content on it's internal drive.
AC

Is the MacBook Air recommended for working with RAW photographs using Aperture or Lightroom and perhaps Photoshop?

Is the MacBook Air recommended for working with RAW photographs in Aperture and Photoshop, or do I need a more powerful MacBook ? The relative lack of weight of the AIr is what attracts me to it.

For doing Photography with RAW files in either Aperture or Photoshop, the new MacBook Air is fine, but for Photoshop CS6 some of the filters and plugins really need a better graphics card and plenty of RAM.
You'll also want an external disk if you are going to be doing lots of shooting.
Summary:
Yes, you can use an air but you'll want external storage and at least 8GB of ram.
Or go MacBook Pro with 16GB ram with the 650M card.

Solaris 11.2 User Manager System Error

Has anyone encountered a system error when attempting to add users as the root role or executing the user manager from the cli as root?
I can use the gui manager after a user has been created in the staff group. I run into issue creating the user as root in any group but staff and any default shell outside of /usr/bin/bash.
Example - Using gui to create user in ftp group with /bin/bash as login shell with auto set for userid and home directory.
Thanks in advance.

No system error for me but I've filed Bug 20873166 - "User Manager" always creates user under "staff" group

I have a sonos music system that does not yet work with Lion and will not for about 3-weeks. I need to uninstall lion and go back to snow leopard, how do I do that?

I have a Sonos music system that is not yet compatible with Lion and will not be for several weeks. How do I uninstall Lion and go back to Snow Leopard?

While we all have MacBooks only a few have Lion. There's a Lion Support Community. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Getting php + apc to work with the arch-package

Hi,
I am trying to get APC to work with PHP. And I am wondering if it is really working.
I have installed the archlinux APC and PHP.
Then I uncommented /etc/php/conf.d/apc.ini in so:
extension=apc.so
When i run php_info():
there is actually a new section for APC:
APC Support enabled
Version 3.0.19
MMAP Support Enabled
MMAP File Mask no value
Locking type pthread mutex Locks
Revision $Revision: 3.154.2.5 $
Build Date May 15 2008 19:49:30
but,
when i do: php-cgi -v
PHP 5.2.9 with Suhosin-Patch 0.9.7 (cgi-fcgi) (built: Mar 25 2009 14:59:15)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
shouldn't it print something at the bottom saying something like "with APC ...."
my other consern is if php actually needs to be compiled with support for APC and that is not the case with the php that comes with the
archlinux package? If I do: php-config
I can not see anything about APC.
If I try to benchmark with and without extension=apc.so I don't see any improvements, actually it is some percent slower with apc commented in.
Last edited by jb234 (2009-06-22 11:27:25)

Ok, I think it is working.
The problem was testing with a too small a php-script. The bigger a php-script the more potential for speedup from apc.
Sorry for the confusion.

Mac Pro RAID block size recommendations for working with audio in Logic Pro

I have recently ordered a Mac Pro and plan to do a RAID configuration across 3 HDD's
The RAID type i am going to do is a RAID 0 striped.
The computer is going to be used primarily for audio post production and working with 20+ 24-Bit audio files at any one time within a Logic project.
I want to know what is the best block size i should use when configuring the RAID.
I understand that using a higher block size is best for working with large files but do i need to do this in my case or will the default 32k block size be enough?
Thanks in advance

Use 64k. Things like databases like having 32k blocks because of all the small files. Audio files are pretty small even at 24-bit 192KHz. Go to 128k if all you are doing is streaming and no samples. But 20+ 24-bit is really not too large anyway considering most modern HDD's can stream 100MB/s off one spindle. You'll probably be fine regardless of the block size you choose. But most audio pro's choose 64k.

I need blacks law disctionary digital plug-in to work with my browser, because it doesn't work any other way with any other browser, the new firefox is incompatible, so can I go back to the old firefox?

I really wish internet providers wouldn't change things so much that your current software can't keep up. Black's Law Dictionary is the only authoritative source for legal terms and it's not free or on a website. The digital version (the only way to keep from carrying around a 5 lb book) is an add-on feature that previously worked with Firefox. It's supposed to work with all browsers, but the browsers have all been changing so much. If I would have known that my blacks-law plug in would be disabled until Firefox becomes compatible again, I would have never upgraded. Tell me how to go back to my old version, so I can finish my research in peace, until you guys get serious about making products that work for people BEFORE you release them.

Try using the Add-on Compatibility Reporter extension to "force" compatibility of that add-on.
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
You really need to contact the developer of that Burke's Law add-on and find out why they can't keep that add-on up-to-date with the new Firefox versions. IMO, if they are using a web browser as the interface for their product and are charging you for that service, they have an obligation to their customer's to keep their stuff fixed for the 2nd most used browser in the world.

Need help to convert SQL MSSQL statement to work with PL in ORACLE

Hi All,
I have the trigger below and it worked on MSSQL server for windown and
I really need your help to convert this trigger to work on PL/ORACLE:
create trigger deleteLD
     on tablea for delete
as
set nocount on
begin
     declare @tablename varchar(100)
     declare @dropSql varchar(50)
     select @tablename= dataset from deleted
     set @tablename = 'LD_' + @tablename
     set @tablename = @tablename + 'UTMSTATS'
     if exists (select * from sysobjects where name = @tablename)
     begin
          set @tablename = 'drop table ' + @tablename
          EXEC (@tablename)
     end
end
GO
Your help is greatly appreciated.
Thanks,
JP

not sure if this is something that you want:
Create Or Replace Trigger deleteLD
Before Delete on tablea
Declare
vCtr          number := 0;
Begin
select count(*)
   into vCtr
   from all_tables
where table_name = :new.tablename;
if vCtr > 0 then
   dbms_utility.exec_ddl_statement('drop table '||:new.table_name);
end if;
End;note: not tested

Can php pass info to a java client-side program?

hi!
can a php script on a remote server (activated thru command line or whatever) pass data over the internet to a java client-side program? if so, how?
thanks!

if it is listening to a known port, how would the data be passed?
thanks!
Not unless the Java program is listening on a known
port.
Yours,
Tom

Need a driver for HP DeskJet 812C to work with Mac OS X 10.8.5

Our Mac (desktop) has OS X 10.8.5 - we would like to use a perfectly fine older printer (yes, it IS older - but cannot afford to replace it at this time). I got so far with a download only to discover that it "no longer works with a Power PC" - isn't there a basic driver to use for the time being so we can print? This printer is a HP DeskJet 812C.
We also have an older HP OfficeJet G85 - we receive the same message about "not working with a Power PC" - is there a generic driver to use either of these printers until we purchase a new one? We are not expecting all the printer features - just print text on paper.
Thanks for advice/help with our problem!

Hi needs_opinion,
Although I would like to help, there is no way of getting either the Deskjet 812c or the HP Officejet G85 to work with Mac OS X 10.8. Now I know you said you are not in a position to get a newer printer at this time, but please consider calling HP. I believe they may be able to help.
The technical department may be able to offer you a disount on a newer model, like a trade in trade up option, or the sales department could offer you a single function low end printer at a good price that will do the simple task of printing.
Here is an example of what could be available, this is from the US shopping webiste, hpshopping.com
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
The only other option is to connect one of the printers to an older operating system. Even if you had an older Windows PC.
Good luck with whatever you decide.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Communication manager 4.0.1 is not working with PCMCIA FBUS

Hi everybody,
since i can remember we have got problems with communication manager driver software ( which is comming with the FF ITK ) using with PCMCIA FBUS card.
I cant use our PCMCIA FBUS 1 or PCMCIA FBUS Series 2 card with the latest communication manager 4.0.1 because the card is not working after installation of the software.

Hi,
There is no such limit of CM 4.0.1 to work with PCMCIA-FBUS interface.
We only have problem with some Dell Laptop because of some hardware issue.
Please refer to the related discussion link:
http://forums.ni.com/t5/FOUNDATION-Fieldbus/NI-FBUS-PC-Card-detected-wrong/td-p/1658478
Also there are several diagnose suggestion for you.
1. Check the Device Manager to see whether the driver is installed and identified correctly.
2. Try several PCMCIA-FBUS cards in your Laptop.
3. Try the same PCMCIA-FBUS card in different Laptop with CM 4.0.1.
Hope this will help. If any further request, please feel free to email me through [email protected]
You could get swift reply and support.
Thanks.
Chris

I need user management system in PHP recommendations to work with Flex client side

Similar Messages

Maybe you are looking for