I need wdaq_bc.h, atwdaq.dll and mcwdaq.dll for win3.1 .

I can't find these anywhere on this site. Any help would be much appreciated.

Thanks for the help timousley. I actually discovered that atwdaq.dll is now nidaq.dll and that the header file wasn't necessary. I used wdaq_c.h instead. It was very difficult to find any info on NI's website and I appreciate your response. I was a newbie to these cards and dll's.
thanks again
nate

Similar Messages

  • Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

    Hello Experts,
    My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
    1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
    deleted or renamed".  How can I do the same.
    2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
    P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
    Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
    not able to add/deletin/modify selection text and text symbols.
    Please provide the solution as it is critical requirement.
    Reagrds,
    Supriya Bhatt.

    Hi Vishal Saxena,
    Just go through the screens and do it .
    [<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
    [<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
    [<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
    Thanks
    Venkat.O

  • I need to display planned quantity and actual quantity for Plant in quarter

    Hi,
       I need to display planned quantity and actual quantity for Plant in quarter  AND  month wise as  below.
                                                                    Q1                              Q2  .......                              M1                                       M2 .........................................
    PLANT    MATERRIAL    UNIT     PLTY   ACTQTY          PLTY   ACQTY                   PLTY   ACQTY                    PLTY   ACQTY
    P1            M1                      EA        20        15                      30       25                             40       35                              50       45
    P1            M2                      EA        20        15                      30       25                             40       35                              50       45
    P2            M2                      EA        20        15                      30       25                             40       35                              50       45
    I will keep plant and material infoobject as row. Can you please suggest how i should design column section to display like above
    Regards
    Deep.

    Hi Deep,
    Assuming you have an InfoObject for Quarter (say 0CALQUARTER) & Month (say 0CALMONTH), drag the Quarter InfoObject & Month InfoObject below in the Columns. Drag your KFs i.e. Planned Qty & Actual Qty below the Month InfoObject to form a KF structure. If you don't want Qty Unit to be displayed alongside your KFs, use NODIM() function & display Unit in the Rows.
    --Priya

  • Need Help to provide Filter and Total Provisions for Table Control

    Hi ,
    I need to provide 'Set Filter' and 'Total(Summation)'  Buttons functionality in my application which is having a Table Control. I know these functionality provision with ALV Grid but not with Table control and would appreciate if any body can help me.
    Regards,
    Srinivas

    hi SRINI VASA
    can you provide me with the answer you found to your question, I'm having a spec with the similar requirement.
    Thanks

  • Need to make automatic startup  and shut down for the instance

    hi to all
    i have os : Red Hat lunix as 3 , woth oracle DB 10g 10.0.1
    need to make an automatic startup and shut down for the instance when i start and shutdown the OS
    i tried Use dbstart and dbshut scripts then created file dbora at dbora as a script
    then i did
    # ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
    nothing worked
    if you will attach me any files
    my mail is :
    [email protected]
    thanks much
    Ahmed

    Hi,
    The /etc/oratab should have an entry for this database with 'Y' in the last field as:
    Oracle_sid: Oracle_Home:Y, so when dbstart command issued it will check the oratab and starts the database.
    I advise you to keep the dbstart and dbshut in different scripts and save them directly in the runlevel directories, instead of creating links.
    thanks
    srinivas.

  • Need to add Loading Grp and Transportation Grp for a material

    Hi Friends,
    I want to add the loading grp and transportation grp for a material using transaction MM02 but I am unable to do so. Also would like to add a few more views like plant storage and accounting view for the same material using MM01 but I am unable to see these views in the selection box.
    Can anyone please tell me how can I do so.
    Regards,
    Wasim.

    HI
    Goto OMS2 and then double click on the material type and now select the required views in User Departments Tab.
    To add loading group and transportation group you have to enter the Sales organization and distribution channel in MM02
    regards
    Prashanth

  • I need help on back up and more storage for photos and videos.  I have a imac (500g) that I back up to a 500g hard drive using time machine.  How do I set up a larger hd and back that up as well?

    I can buy a 1T hd to store photos and videos to, but would need a second one to back that up as well?  I guess I need to know how to get aperture and iphoto to keep my photos on a larger drive and how to keep both the imac and that larger hd backed up.  Note- we can't get  DSL, so off site back up isn't a viable option.

    Move your photo and video libraries to an external HD. Apple explains how to do this in:
    iPhoto: How to move the Library to an EHD

  • Need to find all Bugs and QF created for 8.0.0.13

    Hi all,
    I kneed to know how to find all bugs and possibly patches/QF created on top of 8.0.0.13 for bugs found in 8.0.0.13 after its release on Jan 2012. This is for my Customer that needs to know if they have to plan some QF in proactive way.
    I can access to Internal Support Portal, so if there is any place where Support people can go I can access.
    Thank you in advance
    Chiara Scarafiotti
    ACS TAM

    Hi radhika,,
    This the the way to go..just modify the col according to your table col names...
    You can do a CONNECT BY query without a START WITH clause to link every node with each of its ancestors.
    Getting the total is just a matter of GROUP BY.
    SELECT emp_id, employee_name, manager_id
    , CASE
              WHEN COUNT (*) = 1
              THEN 0
              ELSE COUNT (*)
         END               AS cnt0
    ,     COUNT (*)      AS cnt1
    FROM employee
    CONNECT BY emp_id     = PRIOR          manager_id
    GROUP BY emp_id, employee_name, manager_id
    ORDER BY emp_id;
    output:
    Output:
    . EMP_ID EMPLOYEE_N MANAGER_ID CNT0 CNT1
    1 Mark 0 5 5
    2 John 1 3 3
    3 Stella 1 0 1
    4 Karen 2 0 1
    5 Andrea 2 0 1
    I made this a bottom-up query (going from each node to its ancestors) rather that a top_down query (node to descendants) because you can't GROUP BY CONNECT_BY_ROOT.
    In your description you implied that each node would be counted among its own descendants, but in the sample output you had 0, not 1, as the count for all the leaves, that is, managers counted as their own descendants, but non-managers did not. The column called count0 in the query above does that; the column count1 counts each node as its own descendant, leaves included.
    Regards
    Onenessboy

  • Need to make # of periods and frequency required for certain prod category

    We have a requirement to make the # of periods and frequency fields required for a certain product category. I know I need to use a field validation for this but my issue is that the product category and product name fields are non-editable. I tried putting the validation on the product ID field but it is not working properly. It still throws the error even when values are entered and regardless of the category. Here is the expression I am trying to use:
    IIf(FieldValue('<ProductCategory>')="XYZ", [<NumberOfPeriods>] is not NULL, FALSE)
    Any ideas?

    You can add the read-only token ($RO$) after any of the segments in the list. For example, the ($RO$) designator below sets Segment1 in structure code 1 to be read-only:
    Structure code1|Segment1($RO$)|Segment2...
    P.S: After I posted this message, I realized this was not what you are looking for. After all, this may help somebody.
    Edited by: dbhat1 on Dec 8, 2008 3:55 PM
    Edited by: dbhat1 on Dec 8, 2008 3:56 PM

  • Need help with export, truncate and import partitions for schema

    I need to export a couple partions for our Oracle 10g Data Warehouse, truncate the partions and re-import the data using the exported file. How can I do this?
    In summary here is what I need to do:
    1) Export partition P_SUB_1 of table1
    2) Export partition P_SUB2 of table2
    3) Truncate P_SUB1 partition of table1
    4) Truncate P_SUB2 partition of table2
    5) Rebuild indexes on table1 and table2
    6) Re-import data into each partition from export files.

    If you have enough free space it might be easier to keep these partition in the database and do an exchange.
    That means:
    create table tmp_sub1 as select * from table1 where 1=0;
    create table tmp_sub2 as select * from table2 where 1=0;
    alter table table1 exchange partition sub1 with table tmp_sub1;
    alter table table2 exchange partition sub2 with table tmp_sub2;After that your have the data of your original partitions in the tmp tables and the particular partitions in the partitioned table are empty and ready for the loading process.
    If the loading process fail and you need to restore the partitions just reverse the exchange statements and you are done.

  • Need Configuration File (fsisys,fsiuser and afgjob) details for running a XML in documaker 12

    Hi,
              I need basic configuration details for running a simple xml in documaker 12. Details like printer,recipient configuration,etc.

    Hello Sen,
    You might want to set the below XML-related configuration sections besides doing the general DB Handler and Library setup that is required for Documaker 12.x version. The Printer configuration may not require changes from the flat-file extract mode. Make sure the afgjob entry ;BatchingByRecipINI;;; is in place too.
    < ExtractKeyField >
      SearchMask = 1,<?xml
    [ RECIP_NAMES ]
      ZERO=000,
      FC=101,FULL COPY
    < BatchingByRecip >
      DefaultBatch = BATCH1
      Batch_Recip_def = !//RecipientRecord[RecipientDescription="Full Copy"];"BATCH1";FC
    < RUNMODE >
       NAUNLOAD = Yes
       XMLExtract = Yes
       DownLoadFAP = Yes
       ChkDstLenExceeded = No
       LoadCordFAP = No
       CheckNextRecip = No
       CompiledFAP = No
    < TRN_Fields >
        SystemInd = !//TransactionRecord/TransactionKey/SystemIndicator
        TransactionNum = !//TransactionRecord/TransactionKey/TransactionNumber
        LOB = !//PolicyRecord/LOB
        Iteration = !//TransactionRecord/TransactionKey/Iteration

  • NEED TO FIND MP4 IMPORT AND EXPORT PLUGINS FOR PREMIERE 6.0

    DOES ANYBODY KNOW WHERE TO GET
    SUCH ITEMS FOR THIS DINOSAUR?
    ALSO WOULD LIKE TO FIND OPEN SOURCE ITEMS FOR PREMIERE 6.0
    DO THEY EXIST?
    WOULD LIKE TO FIND MJPEG PLUGINS AND FX OR OTHER EXPORT FORMAT PLUGINS, OR ?
    THANKS FOR THE HELP WES

    Wes,
    I could be wrong, but IIRC, it was not until PrPro 2.0 that H.264 was added. Check me out on this.
    Pr/PrPro uses installed CODEC's. There are three popular H.264 CODEC's, Apple's, Lead's and MainConcept's. Some have had issues with Apple's, but mainly with Export. I'd install one of those, and test. Let's hope that my memory is faulty on version numbers, and that Pr 6.0 CAN use the CODEC, when installed properly.
    Good luck, and please report. I would be happy to be proved wrong on this one.
    Hunt

  • Need help.  Both iTunes and Setting's for photo usage show about 2000 more photos then appear on the Camera Roll with no additional libraries.  This takes up many gb of phantom photo storage.  I just upgraded software, I've reset the phone.  Need help!

    iTunes - Photos  36.71 GB and 7265 Photos
    Settings/General/About 7086 Photos and 202 Viedos
    Settings/General/Usage 35.8 gb for Photos & Camera
    Photo app (one it comes with) shows ONLY 5522 on the Camera Roll this matches what it shows when I access photos with PC
    How do I get rid of the phantom photos using up my gb's.  I want access to the addtionaly storage!  Please Help
    note- not tech savy so an easy fix or detailed step by step is appreciated

    iTunes - Photos  36.71 GB and 7265 Photos
    Settings/General/About 7086 Photos and 202 Viedos
    Settings/General/Usage 35.8 gb for Photos & Camera
    Photo app (one it comes with) shows ONLY 5522 on the Camera Roll this matches what it shows when I access photos with PC
    How do I get rid of the phantom photos using up my gb's.  I want access to the addtionaly storage!  Please Help
    note- not tech savy so an easy fix or detailed step by step is appreciated

  • How to implement the DLL for the I2C USB Converter from Coptonix

    I need to implement the DLL for the I2CUSB Converter from Coptonix into a LV-Program.
    I'm not sure how to use the BroadcastSystemMessage (part of user32.dll).
    Attached you will find the manual of the converter.
    And you'll see the VI that I have created.
    Many thanks in advance!
    Silvio
    Attachments:
    Fenster_I2CUSB_GetDeviceInfo_LV2010.JPG ‏94 KB
    IICUSB32DLL.pdf ‏58 KB

    Hello smercurio_fc
    Thank you very much for your posting. I'm able now to deal with the BroadcastSystemMessage... One problem still occures: I can start the VI once and it returns 9 messages (for every event that the DLL sees), but if I start the VI again
    it adds 6 additional messages. I tried to flush the MessageQueue but that didn't help? What can I do?
    Attachments:
    COD01.0420-PP_Test17_I2C_Version_03.vi ‏43 KB
    COD01.0420-PP_IIC_Teilbereich_01.JPG ‏201 KB
    COD01.0420-PP_IIC_Teilbereich_02.JPG ‏206 KB

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

Maybe you are looking for