I need your help guys!!!1

Hi everyone,
I have an iPod Touch and it has got a small hairline crack. The iPod is still in warranty. Will Apple repair it free of charge or would I have to pay for it?
Thank You for your time.

My guess is probably not. The only ones that can answer for sure are at the Apple Store. My an appointment for them to look at it and they will tell you your options.

Similar Messages

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller.

Code for send button. I need your help, guys!

I would appreciate a Java code for a "send" button or a "send page" link that would send a complete web page to my email address. I have some forms for my users to fill out online and send them to me, and so the problem I am having is that when I use FrontPage forms (text boxes, check boxes, radio buttons, etc.,)for them to use, I am getting the input from those form only. What I NEED to get is the complete page, exactly what the users see on the screen with all the text in the forms. The need for this is that these forms (reports) will later be printed out, so they MUST look exactly as on the screen.
So I am thinking a bit of Java code could help me out. Would you give me a hand guys? Thanks!

Do some JNI and take a snapshot of the screen, it is the ONLY way I know to ensure EXACTLY what you ask for: even the HTML from the page may look different than what the users sees when filling out the form when that HTML is displayed on a different machine and system.
Otherwise your agument seems a little trivial and you could just replicate the form on your local machine and insert the data you captured with a normal post operation into the local copy of the HTML form.

HT1212 I need your help guys

Good Day Guys,
I forgot my pass code i need to remove every thing in my mobile and start using it as new device, can some help me pleeeeeeeasae

If you lose or forget your passcode, you will need to perform a factory restore to remove it.

I NEED YOUR HELP GUYS!! I WAS DOWNLOADING OSX LION WHEN MY NET CONNECTION STOPPED. THE ICON DISAPPEARED AND IT WILL TAKE 48HOURS FOR THE INTERNET CONNECTION TO BE RESTORED. WHAT SHOULD I DO? PLEASE HELP ME. IM NOT TECHIE AT ALL SO PLEASE.. PLEASE HELP ME.

The internet was working fine til 10:31am philippine time. Was downloading OSX Lion, at that time it was somewhere half. Then all of a sudden internet failed and lost connection. Called my ISP immediately and was told it would take 24-48hours for the service to be restored. THen after ending the call the OSx Lion icon disappeared. I dont know what to do. Im not techie at all. Please guys. HELP ME>

Hey allan. I dont know. Nothing seems to change. I still dont have net connection. Im at a net shop right now. (Not using mac.) What will happen to the OSX Lion that I payed for? The icon was gone. Im still in the middle of downloading it.

Report with Two Queries -- Really need your Help Guys

I might be posting duplicate thread but i couldnt found the Q&A that i am looking for.
I am trying to create a report where i have to use two query. Also, with this query i am passing parameter where i ask user to enter Report Month so they can run report by what ever month they want to see data.
Now my Q_2 is duplicate or Q_1 because in my final report layout i have to display fields where i have to compare current_month_data to Previous_month_data. so basically i want user to in put current month date and previous month date and layout look like.
Company_Name Currentmonth_sale previousMonth_Sales ....
Honda $1423.42 $324.42
Toyota $3433 $4255.45
so on....
Now so far i create report manualy and drop two query in to the report but when i trying to create Report Wizard and group by each Company.. it is not giving me the out put that i want. Instead of giving me above out put its give me my Q_! result with each company group and then under that result i have Q_2 result.
so HOW CAN I DISPLAY FIELDS FROM MY Q_2 WITH MY REST OF THE FIELD ON Q_1?????????????????????????
Thank You guys.

Actually, I tried to use Data Link but i am not able to success.
Let me know if I am doing anything wrong . i click on left hand side tool panel where its says DATA LINK. then i click on Q_1 field and then drag the mouse over to Q_2 query with same field name. but its give me an error that Can not link it because of Group data and i have option to choose Yes, NO or Cancel.
Let me know what are the step i need to take in order to link this two queries.
Thank You
keyun

Hi i need your help guys

Hi everyone I have a problam with my macbook pro.
When i using my laptop suddenly the screen is turning off, but computer continiues working, and i need to shut down computer with power button and then turn it on again. if anyone can help me please respond me.
P.s. i have bootcamp installed and there is same problem
(sorry for my english)

i cant find where is year

I need your help guys...really...

Ok...I'll try to explain my problem...I hope you will exuse my poor english.
I'm a very satisfied owner of an iPod nano which I use with the iTunes software. Recently I also bought a few songs for the italian iTunes Music Store and I was very satisfied also by this service; but I had a problem.
A few days ago I had to completely erase my hard disk because a virus damaged it. I made a copy of my music folder and I re-install the Win XP2 operating system but when I re-imported my songs I discovered with sadness that the music bought on the iTunes Store was disappeared. I try to recover them from my iPod but iTunes didn't allow me; I autorized my pc following the instructions gave on the web site but I always receive the same answer....you are not autorized to transefr this music on your pc. How can I do? Moreover some songs that weren't up to date on my iPod and were only in the music backup folder are completely lost I think....can I recover them?
I hope I manged to explain my problem and that you can help me.
Thank you very much
Dimitri

For Valentine...I try to return on the store and to re-download the a song but I have to pay another time....it don't works...
For Lance...I never change my account! When I connect my iPod and I try to transfer my purcheges iTunes tells me that I'won't be able to transfer my songs because my pc is not authorized....In the "store" window I authorized my pc, using my account username and the password , with success but I still can't transfer my songs.

Need your help guys! PLZ!

hi guys im new here! im from colombia! but I have a problem....
first... I have one ipod and my bro have another.... my ipod works perfect but my brothers one.... well! stinks! anyway... I dont know why but when he connect the ipod to windows.... sounds a tirili... lol... anyway windows got the ipod... but when he open itunes... dont work! itunes cant find it!!!!!!!! im desesperate!!! my bro have 13 years old... and dont have idea about all this Sh*t!
ITS WEIRD BECOUSE... I USE MY IPOD... JUST PERFECT! itunes read it... windows read it! i have movies! have music photos!!! blablabla! BUT MY POOR! BRO! DONT HAVE! ANYTHING!!!!!!!! PLZ GUYS! HEEEEELP ME!

well did u install ur bros ipod too?

I NEED YOUR HELP GUYS PLEASE

IM JUST NEW TO ADOBE FLASH AND I DONT HAVE ANY IDEA WHAT TO DO
AND I HAVE A SCHOOL PROJECT USING FLASH
CAN YOU MAKE A TUTORIAL ON HOW TO MAKE THIS
1.MAKE INPUT BOX
2.MAKE OUTPUT BOX
3.IF YOU INPUT "HI" ON THE INPUT BOX THE OUPUT WOULD BE "HELLO"
ITS LIKE A INTELLIGENT CHATTERBOT
PLEASE HELP ME
IM BEGGING YOU ALL

My instincts tell me that I should not help you because this is for a school project and defeats the purpose of the exercise. However, you are only hurting yourself in the long run. On the other hand I am also a firm believer that the right person can learn a lot by looking at example code.
import flash.text.TextField;
import flash.utils.Dictionary;
import flash.text.TextFieldType;
import flash.events.KeyboardEvent;
import flash.ui.Keyboard;
var inputTF:TextField = new TextField();
var outputTF:TextField = new TextField();
inputTF.border = true;
outputTF.border = true;
inputTF.width = 200;
inputTF.height = 20;
outputTF.width = 200;
outputTF.height = 20;
inputTF.type = TextFieldType.INPUT;
inputTF.multiline = false;
outputTF.mouseEnabled = false;
outputTF.selectable = false;
outputTF.y = inputTF.height;
outputTF.multiline = false;
addChild(inputTF);
addChild(outputTF);
var outputMap:Dictionary = new Dictionary();
outputMap["hi"] = "Hello";
inputTF.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
function keyDownHandler(e:KeyboardEvent):void
          if (e.keyCode == Keyboard.ENTER)
                    var enteredText:String = inputTF.text.toLowerCase();
                    var outputText:String = outputMap[enteredText];
                    if (outputText != null)
                              outputTF.text = outputText;
                    else
                              outputTF.text = "I don't know that";
                    inputTF.text = "";
You're welcome

My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni

Absolue beginner need your help with basics of shell / applescript and xode

Guys,
I'm an absolute beginner in both xcode and applescript trying to wrap a few shell commands with some basic graphical elements.
I will need your help after 2 days of tests and un-successful trials.
Trying to display "$ifconfig en0" shell results into a text box.
Here is what I'm doing:
property networkif : missing value
property dhcpview : missing value
set the dhcpview to do shell script "/sbin/ifconfig " & networkif
I can't have this accepted:
set contents of text field "hmmm" to "DHCP " & dhcpview
hmm is the name I have set under Interface Builder to a text box (NSTextView object)
Xcode compiler returns me an error :
ToolAppDelegate.applescript:99: error: A “"” can’t go after this identifier. (-2740)
Command /usr/bin/osacompile failed with exit code 1
while doing this is absolutely working but on a separate popup window:
display dialog " Here is your IP address in ALU's network: " & dhcpview
I have no clue what I'm doing wrong.

It looks like you are trying to use *AppleScript Studio* syntax in an AppleScriptObjectiveC project - the way you connect the user interface items to your script is different in the new framework. If you are creating a new ASOC project, take a look at MacScripter's entry level tutorial AppleScriptObjC in Xcode for some examples.

Beginner in java and need your help about DES

hello,
I m a new guy in java programming and learn from many books.I m making a website and portal right now and dying need your help about DES.my portal (using java) requires somebody to make a login name and a password.I m done with the server and client things and rite now stuck with this "DES" stuff.
so I make some conditions and algorithm below..
1. when a user login,the password is encrypted.at this point,cleartext(id) and encryption (M,N) are involve.
2. then the key is changed based on algorithm.
3.the key changed by key(id) is received and the original text should be encrypted.
the algorithm
1. the original text x1.x2.x3.x4.x5.x6.x7.x8 (64 bits)
2. encypt the password
a. Each character is changed into an int type by the ASCII code, and let the 1st bit be an odd number parity bit.
b.The 1st bit of the 1st character in (IP) is set to '1', and the 8th bit of the 8th character as '64'.
c.the rest (IP) is like this
1 2 3 4 5 6 7 8
0 # 58 50 42 34 26 18 10 2
8 # 60 52 44 36 28 20 12 4
16 # 62 54 46 38 30 22 14 6
24 # 64 46 48 40 32 24 16 8
32 # 57 49 41 33 25 17 9 1
40 # 59 51 43 35 27 19 11 3
48 # 61 53 45 37 29 21 13 5
56 # 63 55 47 39 31 23 15 7
d. and lastly,from above,,it should be done like this
1 2 3 4 5 6 7
0 # 40 8 48 16 56 24 64 32
8 # 39 7 27 15 55 23 53 31
16 # 38 6 26 14 54 22 52 30
24 # 37 5 25 13 53 21 51 29
32 # 36 4 24 12 52 20 50 28
40 # 35 3 23 11 51 19 49 27
48 # 34 2 21 10 50 18 48 26
56 # 33 1 20 9 49 17 47 25
e. key y1,y2,y3,y4,y5,y6,y7,y8 (64bit)
f. generate the key based on ID
a. Each character is changed into an int type by the ASCII code, and let the 1st bit be an even number parity bit.
b.the process is repeat again.
anybody has an idea to help me with the sample program?
thanks in advance...

just ask about a simple program how to receive a
password from somebody and change it to a key..and
then confirm it with DES.Once again I have a problem understanding what you are asking.
Are you trying to use the password as a key to encrypt some 'standard thing' and place this encrypted value in a database? If so then look in the JCE for 'password based encryption' such as PBEWithMD5AndDes. This seems back to front to me but I can see nothing wrong with the approach since the 'standard thing' you would encrypt is in effect a key. If this is for a commercial application then I would find a security expert to evaluate your proposal!
In my experience it is more normal to encrypt the user's password with DES and store the result in the database. To do this just look in the JCE for DES encryption and consider using DES with CBC and PKCS5 padding. Also, consider encrypting the concatenation of the user's 'user name' with the password as this will (almost certainly) avoid having two encrypted values in the database that are the same even if two users have the same password.
For both of these you might consider using Base64 or Hex to turn you encrpted bytes into ASCII characters before trying to store them in your DB.

Need Your Help!! thanks

hi guys i really needed your help!! My problem is that why is it my iphone5s did'nt receive an update for iOS7.0.5? But a friend of mine is now using iOS7.05...so whats the problem of my iphone i connect it to computer using iTunes but it says my iOS7.0.4 is up to date!!! But i need to update into iOS7.0.5 whats the process should i do? Thanks and more power

His is likely a grey market phone originally intended for China. Not all that unusual in the middle east. But the bottom line is that if you are in SA, you don't need 7.0.5. It won't change anything about your phone. It is only intended to correct connectivity issues with Chinese providers.

Need your help in Remodeling concept

Hi Gurus need your help in time estimations
I have a cube with data and now I need to add 10 new info objects to the cube which are including Date fields (BUDAT, BLDAT) these 10 fields will be populated to the cube from a Z table in ECC as we donu2019t have these fields in the cube we have to go for remodeling of the cube
My client requires how much time it will take to complete this
Now I want to know how much time it would take to do this (if any customer exits and user exits are required) and addition if new fields will have any effect on the current queries
Please advice in this
Thank you

The time taken will depends on a lots of factor like server speed, available memory, background jobs etc. Apart from this, the time will also depends on how much the cube is filled i.e. the no. of records in the cube. Its very abstract to tell you the exact time taken for this. But, please make sure that you have the backup of the cube which you are going to re-model. T0 say, I think 3-4 hours should be ok for the remodelling.
Thanks.
Shambhu

I need your help guys!!!1

Similar Messages

Maybe you are looking for