I need your help guys...really...

Ok...I'll try to explain my problem...I hope you will exuse my poor english.
I'm a very satisfied owner of an iPod nano which I use with the iTunes software. Recently I also bought a few songs for the italian iTunes Music Store and I was very satisfied also by this service; but I had a problem.
A few days ago I had to completely erase my hard disk because a virus damaged it. I made a copy of my music folder and I re-install the Win XP2 operating system but when I re-imported my songs I discovered with sadness that the music bought on the iTunes Store was disappeared. I try to recover them from my iPod but iTunes didn't allow me; I autorized my pc following the instructions gave on the web site but I always receive the same answer....you are not autorized to transefr this music on your pc. How can I do? Moreover some songs that weren't up to date on my iPod and were only in the music backup folder are completely lost I think....can I recover them?
I hope I manged to explain my problem and that you can help me.
Thank you very much
Dimitri

For Valentine...I try to return on the store and to re-download the a song but I have to pay another time....it don't works...
For Lance...I never change my account! When I connect my iPod and I try to transfer my purcheges iTunes tells me that I'won't be able to transfer my songs because my pc is not authorized....In the "store" window I authorized my pc, using my account username and the password , with success but I still can't transfer my songs.

Similar Messages

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller.

Report with Two Queries -- Really need your Help Guys

I might be posting duplicate thread but i couldnt found the Q&A that i am looking for.
I am trying to create a report where i have to use two query. Also, with this query i am passing parameter where i ask user to enter Report Month so they can run report by what ever month they want to see data.
Now my Q_2 is duplicate or Q_1 because in my final report layout i have to display fields where i have to compare current_month_data to Previous_month_data. so basically i want user to in put current month date and previous month date and layout look like.
Company_Name Currentmonth_sale previousMonth_Sales ....
Honda $1423.42 $324.42
Toyota $3433 $4255.45
so on....
Now so far i create report manualy and drop two query in to the report but when i trying to create Report Wizard and group by each Company.. it is not giving me the out put that i want. Instead of giving me above out put its give me my Q_! result with each company group and then under that result i have Q_2 result.
so HOW CAN I DISPLAY FIELDS FROM MY Q_2 WITH MY REST OF THE FIELD ON Q_1?????????????????????????
Thank You guys.

Actually, I tried to use Data Link but i am not able to success.
Let me know if I am doing anything wrong . i click on left hand side tool panel where its says DATA LINK. then i click on Q_1 field and then drag the mouse over to Q_2 query with same field name. but its give me an error that Can not link it because of Group data and i have option to choose Yes, NO or Cancel.
Let me know what are the step i need to take in order to link this two queries.
Thank You
keyun

Code for send button. I need your help, guys!

I would appreciate a Java code for a "send" button or a "send page" link that would send a complete web page to my email address. I have some forms for my users to fill out online and send them to me, and so the problem I am having is that when I use FrontPage forms (text boxes, check boxes, radio buttons, etc.,)for them to use, I am getting the input from those form only. What I NEED to get is the complete page, exactly what the users see on the screen with all the text in the forms. The need for this is that these forms (reports) will later be printed out, so they MUST look exactly as on the screen.
So I am thinking a bit of Java code could help me out. Would you give me a hand guys? Thanks!

Do some JNI and take a snapshot of the screen, it is the ONLY way I know to ensure EXACTLY what you ask for: even the HTML from the page may look different than what the users sees when filling out the form when that HTML is displayed on a different machine and system.
Otherwise your agument seems a little trivial and you could just replicate the form on your local machine and insert the data you captured with a normal post operation into the local copy of the HTML form.

HT1212 I need your help guys

Good Day Guys,
I forgot my pass code i need to remove every thing in my mobile and start using it as new device, can some help me pleeeeeeeasae

If you lose or forget your passcode, you will need to perform a factory restore to remove it.

I NEED YOUR HELP GUYS!! I WAS DOWNLOADING OSX LION WHEN MY NET CONNECTION STOPPED. THE ICON DISAPPEARED AND IT WILL TAKE 48HOURS FOR THE INTERNET CONNECTION TO BE RESTORED. WHAT SHOULD I DO? PLEASE HELP ME. IM NOT TECHIE AT ALL SO PLEASE.. PLEASE HELP ME.

The internet was working fine til 10:31am philippine time. Was downloading OSX Lion, at that time it was somewhere half. Then all of a sudden internet failed and lost connection. Called my ISP immediately and was told it would take 24-48hours for the service to be restored. THen after ending the call the OSx Lion icon disappeared. I dont know what to do. Im not techie at all. Please guys. HELP ME>

Hey allan. I dont know. Nothing seems to change. I still dont have net connection. Im at a net shop right now. (Not using mac.) What will happen to the OSX Lion that I payed for? The icon was gone. Im still in the middle of downloading it.

Hi i need your help guys

Hi everyone I have a problam with my macbook pro.
When i using my laptop suddenly the screen is turning off, but computer continiues working, and i need to shut down computer with power button and then turn it on again. if anyone can help me please respond me.
P.s. i have bootcamp installed and there is same problem
(sorry for my english)

i cant find where is year

Need your help guys! PLZ!

hi guys im new here! im from colombia! but I have a problem....
first... I have one ipod and my bro have another.... my ipod works perfect but my brothers one.... well! stinks! anyway... I dont know why but when he connect the ipod to windows.... sounds a tirili... lol... anyway windows got the ipod... but when he open itunes... dont work! itunes cant find it!!!!!!!! im desesperate!!! my bro have 13 years old... and dont have idea about all this Sh*t!
ITS WEIRD BECOUSE... I USE MY IPOD... JUST PERFECT! itunes read it... windows read it! i have movies! have music photos!!! blablabla! BUT MY POOR! BRO! DONT HAVE! ANYTHING!!!!!!!! PLZ GUYS! HEEEEELP ME!

well did u install ur bros ipod too?

I NEED YOUR HELP GUYS PLEASE

IM JUST NEW TO ADOBE FLASH AND I DONT HAVE ANY IDEA WHAT TO DO
AND I HAVE A SCHOOL PROJECT USING FLASH
CAN YOU MAKE A TUTORIAL ON HOW TO MAKE THIS
1.MAKE INPUT BOX
2.MAKE OUTPUT BOX
3.IF YOU INPUT "HI" ON THE INPUT BOX THE OUPUT WOULD BE "HELLO"
ITS LIKE A INTELLIGENT CHATTERBOT
PLEASE HELP ME
IM BEGGING YOU ALL

My instincts tell me that I should not help you because this is for a school project and defeats the purpose of the exercise. However, you are only hurting yourself in the long run. On the other hand I am also a firm believer that the right person can learn a lot by looking at example code.
import flash.text.TextField;
import flash.utils.Dictionary;
import flash.text.TextFieldType;
import flash.events.KeyboardEvent;
import flash.ui.Keyboard;
var inputTF:TextField = new TextField();
var outputTF:TextField = new TextField();
inputTF.border = true;
outputTF.border = true;
inputTF.width = 200;
inputTF.height = 20;
outputTF.width = 200;
outputTF.height = 20;
inputTF.type = TextFieldType.INPUT;
inputTF.multiline = false;
outputTF.mouseEnabled = false;
outputTF.selectable = false;
outputTF.y = inputTF.height;
outputTF.multiline = false;
addChild(inputTF);
addChild(outputTF);
var outputMap:Dictionary = new Dictionary();
outputMap["hi"] = "Hello";
inputTF.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
function keyDownHandler(e:KeyboardEvent):void
          if (e.keyCode == Keyboard.ENTER)
                    var enteredText:String = inputTF.text.toLowerCase();
                    var outputText:String = outputMap[enteredText];
                    if (outputText != null)
                              outputTF.text = outputText;
                    else
                              outputTF.text = "I don't know that";
                    inputTF.text = "";
You're welcome

I need your help guys!!!1

Hi everyone,
I have an iPod Touch and it has got a small hairline crack. The iPod is still in warranty. Will Apple repair it free of charge or would I have to pay for it?
Thank You for your time.

My guess is probably not. The only ones that can answer for sure are at the Apple Store. My an appointment for them to look at it and they will tell you your options.

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

HT4993 A CHINESE STUDENT REALLY NEED YOUR HELP!!

A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN: :F1*******8GJ
<Personal Information Edited by Host>

luyao49 wrote:
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked
No such thing is sold from any authorized source in the US. The Sprint phone is not unlocked. It can be unlocked by Sprint for use on international (non US) carriers for current Sprint customers in good standing after completing (I believe) 60 days of service.
If you are having problems using certain features on an unsupported carrier, you'll have to work it out with your carrier.

I just brought an iphone 4 16gb off Ebay and everytime i insert my sim it doesnt allow me to activate any further i really need your help?

i just brought an iphone 4 16gb off Ebay and everytime i insert my sim it doesnt allow me to activate any further i really need your help?

applelogo wrote:
...Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. ...
You need to Contact the Carrier that it is locked to...
Also see this discussion.
https://discussions.apple.com/message/21189708

HT4946 Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!

Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!

Just go into settings>Icloud> then sign in there.

My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni

I need your help guys...really...

Similar Messages

Maybe you are looking for