I_NetLogonControl failed: Status = 5 0x5 ERROR_ACCESS_DENIED

I have a single DC on a single domain that is both a PDC and DNS server. Windows Server 2012. This is the only DC. I cannot join new PC's to domain. I am getting DNS could not resolve to domain controller. The new pc's can resolve by name to DC. Also
the existing PC's are take 5 minutes or more to get to the desk after cred's are put in. This just started happening.
I am getting netlogon errors. 5774. Any Idea's ?
mputer: AD_SERVER.Oakwood2.local
Description:
The dynamic registration of the DNS record '_kerberos._tcp.Default-First-Site._sites.dc._msdcs.Oakxxx.local. 600 IN SRV 0 100 88 AD_SERVER.Oakxxx.local.' failed on the following DNS server:
DNS server IP address: 192.168.x.x
Returned Response Code (RCODE): 0
Returned Status Code: 10054
For computers and users to locate this domain controller, this record must be registered in DNS.
USER ACTION
Determine what might have caused this failure, resolve the problem, and initiate registration of the DNS records by the domain controller. To determine what might have caused this failure, run DCDiag.exe. To learn more about DCDiag.exe, see Help and Support
Center. To initiate registration of the DNS records by this domain controller, run 'nltest.exe /dsregdns' from the command prompt on the domain controller or restart Net Logon service.
Or, you can manually add this record to DNS, but it is not recommended.
ADDITIONAL DATA
Error Value: An existing connection was forcibly closed by the remote host.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="NETLOGON" />
<EventID Qualifiers="0">5774</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-02T13:29:23.000000000Z" />
<EventRecordID>33628</EventRecordID>
<Channel>System</Channel>
<Computer>AD_SERVER.Oakxxxx2.local</Computer>
<Security />
</System>
<EventData>
<Data>_kerberos._tcp.Default-First-Site._sites.dc._msdcs.Oakwood2.local. 600 IN SRV 0 100 88 AD_SERVER.Oakwood2.local.</Data>
<Data>%%10054</Data>
<Data>192.168.x.x</Data>
<Data>0</Data>
<Data>10054</Data>
<Binary>0000</Binary>
</EventData>
</Event>

DCDiag output
Event String:
The dynamic registration of the DNS record '_ldap._tcp.gc._msdcs.Oak
ood2.local. 600 IN SRV 0 100 3268 AD_SERVER.Oakwood2.local.' failed on the foll
wing DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.Default-First
Site._sites.gc._msdcs.Oakwood2.local. 600 IN SRV 0 100 3268 AD_SERVER.Oakwood2.
ocal.' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.7bf443d4-45db
433e-93e6-299481dca2ae.domains._msdcs.Oakwood2.local. 600 IN SRV 0 100 389 AD_S
RVER.Oakwood2.local.' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '30817a07-f15f-4daa-a2ab-
6bc6e4b909c._msdcs.Oakwood2.local. 600 IN CNAME AD_SERVER.Oakwood2.local.' fail
d on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kerberos._tcp.dc._msdcs
Oakwood2.local. 600 IN SRV 0 100 88 AD_SERVER.Oakwood2.local.' failed on the fo
lowing DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kerberos._tcp.Default-F
rst-Site._sites.dc._msdcs.Oakwood2.local. 600 IN SRV 0 100 88 AD_SERVER.Oakwood
.local.' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.dc._msdcs.Oak
ood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwood2.local.' failed on the follo
ing DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.Default-First
Site._sites.dc._msdcs.Oakwood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwood2.l
cal.' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kerberos._tcp.Oakwood2.
ocal. 600 IN SRV 0 100 88 AD_SERVER.Oakwood2.local.' failed on the following DN
server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kerberos._tcp.Default-F
rst-Site._sites.Oakwood2.local. 600 IN SRV 0 100 88 AD_SERVER.Oakwood2.local.'
ailed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_gc._tcp.Oakwood2.local.
600 IN SRV 0 100 3268 AD_SERVER.Oakwood2.local.' failed on the following DNS se
ver:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_gc._tcp.Default-First-S
te._sites.Oakwood2.local. 600 IN SRV 0 100 3268 AD_SERVER.Oakwood2.local.' fail
d on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kerberos._udp.Oakwood2.
ocal. 600 IN SRV 0 100 88 AD_SERVER.Oakwood2.local.' failed on the following DN
server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kpasswd._tcp.Oakwood2.l
cal. 600 IN SRV 0 100 464 AD_SERVER.Oakwood2.local.' failed on the following DN
server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_kpasswd._udp.Oakwood2.l
cal. 600 IN SRV 0 100 464 AD_SERVER.Oakwood2.local.' failed on the following DN
server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.ForestDnsZone
.Oakwood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwood2.local.' failed on the
ollowing DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.Default-First
Site._sites.ForestDnsZones.Oakwood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwo
d2.local.' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.DomainDnsZone
.Oakwood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwood2.local.' failed on the
ollowing DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.Default-First
Site._sites.DomainDnsZones.Oakwood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwo
d2.local.' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record '_ldap._tcp.pdc._msdcs.Oa
wood2.local. 600 IN SRV 0 100 389 AD_SERVER.Oakwood2.local.' failed on the foll
wing DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record 'Oakwood2.local. 600 IN A
192.168.60.14' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record 'gc._msdcs.Oakwood2.local
600 IN A 192.168.60.14' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record 'ForestDnsZones.Oakwood2.
ocal. 600 IN A 192.168.60.14' failed on the following DNS server:
An error event occurred. EventID: 0x0000168E
Time Generated: 02/02/2015 11:07:58
Event String:
The dynamic registration of the DNS record 'DomainDnsZones.Oakwood2.
ocal. 600 IN A 192.168.60.14' failed on the following DNS server:
......................... AD_SERVER failed test SystemLog
Starting test: VerifyReferences
......................... AD_SERVER passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Oakwood2
Starting test: CheckSDRefDom
......................... Oakwood2 passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Oakwood2 passed test CrossRefValidation
Running enterprise tests on : Oakwood2.local
Starting test: LocatorCheck
......................... Oakwood2.local passed test LocatorCheck
Starting test: Intersite
......................... Oakwood2.local passed test Intersite

Similar Messages

I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

when running nltest commands getting the following errors are generated.
C:\Users\Administrator>nltest.exe /sc_query:chickbuns.com
I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
C:\Users\Administrator>nltest.exe /dclist:chickbuns.com
Get list of DCs in domain 'chickbuns.com' from '\\DC1.chickbuns.com'.
DC1.chickbuns.com [PDC] [DS] Site: Default-First-Site-Name
The command completed successfully
C:\Users\Administrator>nltest /dcname:chickbuns.com
NetGetDCName failed: Status = 2453 0x995 NERR_DCNotFound
C:\Users\Administrator>nltest /domain_trusts
List of domain trusts: 0: CHICKBUNS chickbuns.com (NT 5) (Forest Tree Root) (Primary Domain) (Native)
The command completed successfully
C:\Users\Administrator>nltest /dsquerydns
Flags: 0
Connection Status = 0 0x0 NERR_Success
There was no failure in the last update for all DC-specific DNS records
The command completed successfully
C:\Users\Administrator>nltest.exe /server:ad.chickbuns.com /sc_query:chickbuns.com
I_NetLogonControl failed: Status = 1722 0x6ba RPC_S_SERVER_UNAVAILABLE
C:\Users\Administrator>nltest /dsgetfti:chickbuns.com
Geting forest trust information failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

Hi,
>>C:\Users\Administrator>nltest.exe /dclist:chickbuns.com
Get list of DCs in domain 'chickbuns.com' from '\\DC1.chickbuns.com'.
DC1.chickbuns.com [PDC]
[DS] Site: Default-First-Site-Name
This tells me that you ran the command on the PDC.
>>C:\Users\Administrator>nltest.exe /sc_query:chickbuns.com
I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
As far as I know, if we run this command on PDC, this is an expected behavior.
>>C:\Users\Administrator>nltest /dsgetfti:chickbuns.com
Geting forest trust information failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
Nltest can test and reset the secure channel that the NetLogon service establishes between clients and the domain controller that logs them on. Clients using Kerberos authentication
cannot use this secure channel.
In fact, I have run the first and last commands you posted. On my PDC, the first command returned the same message with yours, but on my another DC (not PDC), the command
completed successfully. However, the last command returned the same message with yours on my both DCs(I use Kerberos authentication), which reads:
Geting forest trust information failed….
In addition, the following threads and article can be referred to for more information.
ERROR_NO_SUCH_DOMAIN on PDC Emulator role / Windows Server 2008
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ef00cffe-f568-4ca7-967a-cb1eb9838520/errornosuchdomain-on-pdc-emulator-role-windows-server-2008?forum=winserverDS
ERROR_NO_SUCH_DOMAIN
http://social.technet.microsoft.com/Forums/windowsserver/en-US/1e7e90fe-189f-4379-a344-f070c0aa41c5/errornosuchdomain?forum=winserverDS
Nltest
http://technet.microsoft.com/en-us/library/cc731935.aspx
Best regards,
Frank Shen

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Fix Business Role / Technical Role assignment in Pending or Failed status

Hi,
We are facing issues with few users where Business role assignment or technical role assignment is going into Pending or failed status.
None of the jobs are failing or throwing any error related with the changes.
We are running IdM 7.2 version with SP8.
Is there a way to fix this issue other than removing and reassigning or recreating ID.
Regards,
Manish

Hi Manish,
If technical role (priv) in failed status, please check Tero's reply in the below post. You can set a periodic job to read users and privs in failed status and use uRetryPrivilegeAdd() function to retry the assignment.
Failed AD privileges
I was able to find a document on how to set up the periodic job.
Retry failed assignments (Privilege)
You should try searching the forum and wiki for answers. Most of the issues are addressed by our community experts already. Thanks.
Kind regards,
Jai
Message was edited by: Jai Suryan

Local disks are in FAIL status after installing the cluster

The /var/adm/messages log isn't giving me much info to go on. This has happened twice now. After installing the cluster, my local disks are in a FAIL status and the cluster is not giving me much information why.
It's a two-node cluster w/ x2100 M2s.
Any ideas?
-Hedo

when I run cldevice status -v, it reports that the two local disks are in FAIL status on each node.
That's all that's going on right now. Everything else seems to be perfect, other then those disks in FAIL status.
== from /var/adm/messages ==
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d12s0 has changed to FAILED
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d11s0 has changed to FAILED
-hedo.

Can the sequence pass/fail status be controlled in Test Stand?

I have a sequence that contains a DoWhile loop. Within the loop are 5 or 6 steps that are executed. If the result of those steps is a fail the loop runs again until it passes or meets its allowable number of iterations. My problem is that if an iteration fails and then passes the result for the sequence is failed. Can the pass/fail status be controlled via an expression etc? I know I can create a subsequence and loop in it with the properties. I am just curious to know if there is a way it can be done like I have explained.
Thanks in advance for any help,
Troy

Troy,
You might be able to use the RunState.ThisContext.SequenceFailed property. Set this equal to False after your loop runs, and the sequence should report as if it passed.
John B.
Applications Engineer
National Instruments

Deployments going to failed status on re-start

Hi ,
In my production instance there are 10 ear files deployed . There is a admin and 2 managed servers. Admin and MS1 is on one box and MS2 is on another box.
When ever i stop MS1 , MS2 , Admin then start Admin , MS1 and MS2 all the deployments goes to failed status . To make the deployments active i have to update each manually .
Please help me with this situation. Every restart is consuming 5 hours of my time. Appreciate your help.
Thanks
Laiju Joseph

Hi,
No, i am not following any order .
I checked wls logs but couldn't find anything concrete

NAC AGENT WEB Your Login session Failed { status = 5 }

Hi,
I have a problem with NAC agent web, did someone seen this error before ?
Your Login session Failed { status = 5 }
I tested all these following , and all are Ok :
• Test using another browser, Firefox for example
• Test using another operating syste
• Check if there any restrictions between the user vlan and nac vlans
Thnx

Hi.
Can you paste all the ACLs on your switch especially the webauth redirect ACL which should deny traffic towards the PSN.
regards
Zubair

ACE Module: Recover a real server probe-failed status

How does the ACE module recover a real server that has entered a probe-failed status state? We are doing some testing, purposely dropping a servers interface. ACE recognizes the server as being down and show it in a probe-failed state. When we bring the system's interface back up, will ACE see this and automatically bring the state back into Operational status, or does someone have to do something on the ACE module?

ACE continues to probe servers that are down or probe_failed. As soon as a server starts responding again its state will switch to alive again.
Nothing to be done.
Gilles.

SCVMM R2 - "Incomplete VM configuration" and other bugs like "failed" status

Noticed a lot of machines in SCVMM go into an irreversible "INCOMPLETE VM CONFIGURATION" status. All options to manage the machine are then grayed out. A couple options like "repair" and "refresh" are available,
neither of which solves the problem. These machines are up and running with no related errors in our Hyper-V cluster. There is also one in a "failed" status with the same symptoms.
When is this bug in SCVMM going be fixed? This is supposed to be enterprise VM management software? Right now, I can't even manage 10 virtual machines with SCVMM because of a BUG. I have to
go to the failover cluster manager or the Hyper-V manager.
I really don't want to wipe out the entire cluster from SCVMM and readd it, because removing the cluster from management uninstalls the SCVMM agent on all servers. Needless to say, adding the cluster back to SCVMM management would (ridiculously) require
a reboot of all servers in the cluster to "reclaim storage." Just confirmed that this will happen in my test environment.
If there is a supported way to fix this, please let me know.
I am by far not the only person that has noticed this problem (try google), but there are no good supported solutions out there.

Hi john,
Possible causes for an Incomplete VM Configuration status include:
          A configuration file needed for this virtual machine is missing, was accidentally deleted, or is inaccessible because of insufficient permissions. Such files include the virtual hard disk files (.vhd)
and any additional virtual hard disk files in a differencing disk hierarchy (associated with checkpoints), ISO images (.iso), virtual network configuration files (.vnc), and virtual floppy disks (.vfd). A missing configuration file can be the result of unmasking
a LUN on a storage area network (SAN) to a different server.
          A virtual hard disk (.vhd) was deleted without removing the virtual hard disk from the virtual machine in Virtual Machine Properties.
          A library share was deleted, and an ISO image on the share was linked to a virtual machine deployed on a host.
          The .vmc file was manually updated or has become corrupted, and Virtual Machine Manager cannot parse the file.
          If a newly discovered virtual machine has Incomplete VM Configuration status, the cause is always a missing virtual hard disk. If other files are missing from the virtual machine—an ISO image (.iso),
a virtual floppy disk (.vfd), or a virtual network configuration file (.vnc)—a job warning is logged without placing the virtual machine in an Incomplete VM Configuration state. To find out more about the issue that caused the Incomplete VM Config statue,
view job details in Jobs view of the VMM Administrator Console for additional information. For information about using Jobs view, see "How to Monitor Jobs" (http://go.microsoft.com/fwlink/?LinkId=98633)
in VMM Help.
As to solution please refer to following article regarding this state :
https://technet.microsoft.com/en-us/library/bb963764.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
1. The config file for the virtual machine is not missing, the machines work flawlessly in Hyper-V manager and failover cluster manager.
2. None of the other solutions apply.
3. Why is "repair virtual machine" in the solution for this? Absolutely does not work.
Forgot to add, I now have a virtual machine that is showing that it has been migrating for days (in SCVMM only of course).
What I believe happened is that SCVMM has a hard time recovering from the famous cluster errors for Hyper-V , 1146, 1230, 5120, and 5142.
In my opinion, the fix is this:
Have Microsoft fix the buggy SCVMM code.

What is reason of failed status and what is solution in rman

HI
what is reason of failed status and what is solution
select status from V$BACKUP_DATAFILE_DETAILS;
INPUT_TYPE STATUS START_TIME END_TIME Minutes
DB INCR FAILED 02/11/11 11:31 02/11/11 12:23 52.6
ARCHIVELOG COMPLETED 02/11/11 15:28 02/11/11 15:28 .03
ARCHIVELOG COMPLETED 02/11/11 16:30 02/11/11 16:30 .05
ARCHIVELOG COMPLETED 02/11/11 17:03 02/11/11 17:06 3.27
DB INCR COMPLETED 02/12/11 09:54 02/12/11 10:18 24.33
DB INCR FAILED 02/14/11 11:05 02/14/11 11:42 37.05
ARCHIVELOG FAILED 02/14/11 11:51 02/14/11 12:11 20.47
DB INCR COMPLETED 02/15/11 10:51 02/15/11 11:26 34.67
DB INCR COMPLETED 02/16/11 11:59 02/16/11 12:32 33.03

by rman backup my backup is successful by above command some backups are failed
what is the reason faild backup status

IPM and config failed status for ICMP jitter collectors.

Hello at all.
We are using IPM 4.2 to configure the collectors on a 7201. We made an upgrade to software 15.0 to solve bug CSCte85239. Then to make the Admin Tag more readable, we have exported all collectors, edited, and then imported. For all ICMP jitter collectors we have received a config failed status. Config failed when we try to add collector using GUI. We are able to manually configure collector. We have already deleted and added the device from IPM.
Any ideas?
Thanks.
Regards.
Andrea

Router sends an inconsistent value error into get-response message: error should be in the PktDataRequestSize.
This variabile cannot be modified using GUI.
Any ideas?
Regards.
Andrea

Pass/fail status (UUT Result) of my main sequence

I would like to have my last step in my test sequence to be a DLL passing to my SQL database a part number, a serial number from “RunState.Caller.Locals.UUT.SerialNumber” and Pass/Fail status of my Test Sequence.
Can I pass pass/fail status of my test sequence to my DLL before execution is completed?
Thank you,
Henry
Solved!
Go to Solution.

Access Pass/Fail status by using RunState.SequenceFailed. It will be True if the test failed.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Adf input file - connection to the server has failed(status=unknown)

We are using input file component to upload an excel file and read it. Sometimes we are getting error - " A Connection to the server has failed. (status=unknown) " when we click on browse and add the file. We are getting this error when we just add the file. We are not doing any operation while adding the file. After the file is added, we have a submit button to do post operations on file. But we are getting this error immediately after we add the file. JDeveloper version 11.1.1.5.0.
Any inputs will help us.
Edited by: adf_forum on May 23, 2013 5:24 PM

Hi,
there must be a stack trace in the log files that gives you more information about this. Chances are the browser closes the socket connection, which you can verify by using another browser and avoiding e.g. VPN connect for testing. Another test to perform is to try 11.1.1.7 and see if this works for the use case in case you sit on a known and already fixed problem
Frank

Internet Explorer:A Connection to the server has failed (status=12152)

I am getting "A Connection to the server has failed (status=12152)" error in my adf application when using Internet Explorer. The application is deployed on a hosted server with SSL.
This seems to happen randomly. After clicking on "OK" and the action is correctly performed again. I don't have this issue in Firefox.
There are no error messages in the server logs.
Can you please let me know how to fix this issue.
ADF:11.1.1.6
WLS: 10.3
Thanks
Shobana

Hi,
I am experiencing the same problem.
Can anyone help?
Thanks.

I_NetLogonControl failed: Status = 5 0x5 ERROR_ACCESS_DENIED

Similar Messages

Maybe you are looking for