I Non /I -secure weblog?

Hello,
I've set up a weblog, but for some time I was having many problems with it - as in, I could only access it locally, it would take forever to load, and it wouldn't save my settings. I did some digging and found that everything would work if I accessed it via my secure site (I host two versions of my site, one secure, one not - the secure version was created just so I could securely access webmail), and change all the links in the config files to go to the secure links instead.
It seems like once I turned on the secure site, it "grabbed" my weblog to the exclusion of the non-secure site.
Is there any way to get this to work on the non-secure site? Everything works right now, but people have to accept my self-signed Security Certificate, and I wonder if that might discourage visitors.
Thanks!
iMac 1.0 Ghz G4 17 Flat Panel   Mac OS X (10.4.7)  

Deleted self-signed certificate, created a new one. Seems to have done the trick.

Similar Messages

  • Problem in invoking a secure weblogic web service from javaws client

    Hi all,
    the situation is this: there is a secure web service (Wssp1.2-2007-Wss1.1-X509-Basic256.xml policy) which is accessed by a stand-alone remote web service client (swing-enabled) which is initiated via java web start. You'll probably wondering why this is a special case. Let me elaborate...
    The first step was to develop the service and the client. This wasn't much of a trouble, since the documentation was very good apart from creating a ClientBSTCredentialProvider object at the client side. The documentation should explicitly state that the sixth argument, that of the server certificate, is required! In any case, the first step was a success and the invocation was encrypted and signed at the message level.
    The second step was to create a stand-alone remote client, without any local weblogic installation. That was a bit of a problem, since wlfullclient.jar or wseeclient.jar or weblogic.jar were not enough. I should note that the client was created via netbeans 7.0 and not with the help of weblogic clientgen. So, I had to make a verbose run from netbeans, in order to enumerate the jars which are accessed and gather them into the same directory. That was OK too. The standalone client works just fine.
    The third step is to simply (not so simply...) make a java web start version of the client. Since the previous step was a success (having all necessary jars in the same directory) this one should not be a problem. Well... that turned out to be a huge issue. What I get back as the error message (shown in the java web start console) is this:
    java.lang.InternalError: error initializing kernel caused by: java.lang.AssertionError: Duplicate initialization of WorkManager
         at weblogic.work.WorkManagerFactory.set(WorkManagerFactory.java:107)
         at weblogic.work.ExecuteQueueFactory.initialize(ExecuteQueueFactory.java:23)
         at weblogic.kernel.Kernel.initialize(Kernel.java:103)
         at weblogic.kernel.Kernel.ensureInitialized(Kernel.java:64)
         at weblogic.rjvm.wls.WLSRJVMEnvironment.ensureInitialized(WLSRJVMEnvironment.java:50)
         at weblogic.protocol.ProtocolManager$DefaultAdminProtocolMaker.<clinit>(ProtocolManager.java:53)
         at weblogic.protocol.ProtocolManager.getDefaultAdminProtocol(ProtocolManager.java:218)
         at weblogic.protocol.ProtocolHandlerAdmin.<clinit>(ProtocolHandlerAdmin.java:23)
         at weblogic.rjvm.wls.WLSRJVMEnvironment.registerRJVMProtocols(WLSRJVMEnvironment.java:120)
         at weblogic.rjvm.RJVMManager.ensureInitialized(RJVMManager.java:87)
         at weblogic.rjvm.RJVMManager.<clinit>(RJVMManager.java:46)
         at weblogic.rjvm.LocalRJVM.<init>(LocalRJVM.java:97)
         at weblogic.rjvm.LocalRJVM.<init>(LocalRJVM.java:28)
         at weblogic.rjvm.LocalRJVM$LocalRJVMMaker.<clinit>(LocalRJVM.java:31)
         at weblogic.rjvm.LocalRJVM.getLocalRJVM(LocalRJVM.java:72)
         at weblogic.xml.crypto.utils.DOMUtils.generateId(DOMUtils.java:403)
         at weblogic.xml.crypto.utils.DOMUtils.generateId(DOMUtils.java:395)
         at weblogic.xml.crypto.utils.DOMUtils.assignId(DOMUtils.java:374)
         at weblogic.xml.crypto.wss.SecurityBuilderImpl.assignUri(SecurityBuilderImpl.java:148)
         at weblogic.wsee.security.policy.SigningReferencesFactory.getSigningReferences(SigningReferencesFactory.java:100)
         at weblogic.wsee.security.wss.policy.wssp.SigningPolicyBlueprintImpl.addSignatureNodeListToReference(SigningPolicyBlueprintImpl.java:446)
         at weblogic.wsee.security.wss.policy.wssp.SigningPolicyBlueprintImpl.addSignatureNodeListToReference(SigningPolicyBlueprintImpl.java:335)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.resolveSignatureList(SecurityMessageArchitect.java:574)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.resolveSignatureList(SecurityMessageArchitect.java:428)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.constructMessage(SecurityMessageArchitect.java:304)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.buildWssMessage(SecurityMessageArchitect.java:138)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.buildWssMessage(SecurityMessageArchitect.java:121)
         at weblogic.wsee.security.wss.SecurityPolicyArchitect.processOutbound(SecurityPolicyArchitect.java:225)
         at weblogic.wsee.security.wss.SecurityPolicyArchitect.processMessagePolicy(SecurityPolicyArchitect.java:123)
         at weblogic.wsee.security.wss.SecurityPolicyConductor.processRequestOutbound(SecurityPolicyConductor.java:119)
         at weblogic.wsee.security.wss.SecurityPolicyConductor.processRequestOutbound(SecurityPolicyConductor.java:91)
         at weblogic.wsee.security.wssp.handlers.WssClientHandler.processOutbound(WssClientHandler.java:117)
         at weblogic.wsee.security.wssp.handlers.WssClientHandler.processRequest(WssClientHandler.java:69)
         at weblogic.wsee.security.wssp.handlers.WssHandler.handleRequest(WssHandler.java:112)
         at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:222)
         at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
         at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
         at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
         at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
         at com.sun.xml.ws.client.Stub.process(Stub.java:272)
         at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
         at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
         at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
         at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
         at $Proxy29.fetchCSD(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
         at $Proxy30.fetchCSD(Unknown Source)
         at exchangecsdclient.CSDExchangeClientImpl.fetchCSD(CSDExchangeClientImpl.java:151)
         at pdfutil.PDFUtilApp.initialize(PDFUtilApp.java:55)
         at org.jdesktop.application.Application$1.run(Application.java:170)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
         at weblogic.kernel.Kernel.ensureInitialized(Kernel.java:66)
         at weblogic.rjvm.wls.WLSRJVMEnvironment.ensureInitialized(WLSRJVMEnvironment.java:50)
         at weblogic.protocol.ProtocolManager$DefaultAdminProtocolMaker.<clinit>(ProtocolManager.java:53)
         at weblogic.protocol.ProtocolManager.getDefaultAdminProtocol(ProtocolManager.java:218)
         at weblogic.protocol.ProtocolHandlerAdmin.<clinit>(ProtocolHandlerAdmin.java:23)
         at weblogic.rjvm.wls.WLSRJVMEnvironment.registerRJVMProtocols(WLSRJVMEnvironment.java:120)
         at weblogic.rjvm.RJVMManager.ensureInitialized(RJVMManager.java:87)
         at weblogic.rjvm.RJVMManager.<clinit>(RJVMManager.java:46)
         at weblogic.rjvm.LocalRJVM.<init>(LocalRJVM.java:97)
         at weblogic.rjvm.LocalRJVM.<init>(LocalRJVM.java:28)
         at weblogic.rjvm.LocalRJVM$LocalRJVMMaker.<clinit>(LocalRJVM.java:31)
         at weblogic.rjvm.LocalRJVM.getLocalRJVM(LocalRJVM.java:72)
         at weblogic.xml.crypto.utils.DOMUtils.generateId(DOMUtils.java:403)
         at weblogic.xml.crypto.utils.DOMUtils.generateId(DOMUtils.java:395)
         at weblogic.xml.crypto.utils.DOMUtils.assignId(DOMUtils.java:374)
         at weblogic.xml.crypto.wss.SecurityBuilderImpl.assignUri(SecurityBuilderImpl.java:148)
         at weblogic.wsee.security.policy.SigningReferencesFactory.getSigningReferences(SigningReferencesFactory.java:100)
         at weblogic.wsee.security.wss.policy.wssp.SigningPolicyBlueprintImpl.addSignatureNodeListToReference(SigningPolicyBlueprintImpl.java:446)
         at weblogic.wsee.security.wss.policy.wssp.SigningPolicyBlueprintImpl.addSignatureNodeListToReference(SigningPolicyBlueprintImpl.java:335)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.resolveSignatureList(SecurityMessageArchitect.java:574)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.resolveSignatureList(SecurityMessageArchitect.java:428)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.constructMessage(SecurityMessageArchitect.java:304)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.buildWssMessage(SecurityMessageArchitect.java:138)
         at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.buildWssMessage(SecurityMessageArchitect.java:121)
         at weblogic.wsee.security.wss.SecurityPolicyArchitect.processOutbound(SecurityPolicyArchitect.java:225)
         at weblogic.wsee.security.wss.SecurityPolicyArchitect.processMessagePolicy(SecurityPolicyArchitect.java:123)
         at weblogic.wsee.security.wss.SecurityPolicyConductor.processRequestOutbound(SecurityPolicyConductor.java:119)
         at weblogic.wsee.security.wss.SecurityPolicyConductor.processRequestOutbound(SecurityPolicyConductor.java:91)
         at weblogic.wsee.security.wssp.handlers.WssClientHandler.processOutbound(WssClientHandler.java:117)
         at weblogic.wsee.security.wssp.handlers.WssClientHandler.processRequest(WssClientHandler.java:69)
         at weblogic.wsee.security.wssp.handlers.WssHandler.handleRequest(WssHandler.java:112)
         at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:222)
         at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
         at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
         at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
         at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
         at com.sun.xml.ws.client.Stub.process(Stub.java:272)
         at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
         at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
         at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
         at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
         at $Proxy29.fetchCSD(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
         at $Proxy30.fetchCSD(Unknown Source)
         at exchangecsdclient.CSDExchangeClientImpl.fetchCSD(CSDExchangeClientImpl.java:151)
         at pdfutil.PDFUtilApp.initialize(PDFUtilApp.java:55)
         at org.jdesktop.application.Application$1.run(Application.java:170)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    The two invocations (one using java and the other using javaws) should obviously have not differences at all since all resources (jars) are the same.
    I have tried all client jar combinations (with wlfullclient.jar, wseeclient.jar, weblogic.jar) and the result is the same. One additional piece of information is that when removing all security parameters (message level encryption and signing) from the web service the java web start client works just fine!!!
    This is not an issue of additional jars that somehow mess with weblogic jars, since the same error occurs even in the basic hello world web service.
    I wonder if someone has faced the same problem. I would really really appreciate any help. Thank you in advance and keep up the good work.
    Cheers,
    Paul.
    Edited by: PaulP on Jan 11, 2012 5:31 AM

    Hi Kal,
    since we're currently evaluating the software and haven't acquired a license, we cannot contact support.
    I only need to know if this is a solved bug or not. Does it have to do with the classloading process (I cannot think of anything else)?
    Thank you again very very much!
    Cheers,
    Paul.

  • Failed to replicate non-serializable object  Weblogic 10 3 Cluster environ

    Hi,
    We have problem in cluster environment, its showing all the objects in Session needs to be serialized, is there any tool to find what objects in session needs to be serialized or any way to find. There was no issue in WLS 8 when the application again setup in WLS 10, we are facing the session replication problem.
    The setup is there are two managed server instance in cluster, they are set to mulicast(and also tried with unicast).
    stacktrace:
    ####<Jun 30, 2010 7:11:16 PM EDT> <Error> <Cluster> <userbser01> <rs002> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1277939476284> <BEA-000126> <All session objects should be serializable to replicate. Check the objects in your session. Failed to replicate non-serializable object.>
    ####<Jun 30, 2010 7:11:19 PM EDT> <Error> <Cluster> <userbser01> <rs002> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1277939479750> <BEA-000126> <All session objects should be serializable to replicate. Check the objects in your session. Failed to replicate non-serializable object.>
    Thanks,

    Hi
    Irrespective of WLS 8.x or WLS 9.x, 10.x, in general any objects that needs to be synced/replicated across the servers in cluster should be Serializable (or implement serializable). The object should be able to marshall and unmarshall. Simple reason why it did not showed in WLS 8.x is may be in that version they could not show these details like Error. May be they showed as Info or Warn or Just Ignored it. Weblogic Server became more and more stable and more efficient down the lines like from its oldest version 4.x, 5.x, 6.x, 7.x to latest 10.x. So my guess is they added more logic and more functionality to capture all possible errors and scenarios. I did worked on WLS 8.1 SP4 to SP6 long time back. Could not remember if I saw or did not see these errors for cluster domain with non-serializabe objects. I vaguley remember seeing it for Portal Domains but not sure. I do not have 8.x installed, otherwise I would have given a quick shot and confirm it.
    So even though it did not showed up in WLS 8.x, still underneath rule is any object that needs to be replicated that is getting replicated in cluster needs to implement Serializable interface.
    Thanks
    Ravi Jegga

  • Details of Adware for Mac on F-Secure weblog

    Does anyone think this is true about adware for Macs at the following weblog address <www.f-secure.com/weblog/#00001030>?
    No virus or adware is one of the reasons I picked Mac over PC, have I wasted my money?

    No virus or adware is one of the reasons I picked Mac over PC, have I wasted my money?
    There are a couple of documented 'proof of concept' malware apps out there for the Mac, or several thousand real life ones out for Windows - seems a pretty obvious answer to your question.

  • Call an Non-SharePoint Secured RESTful API from a Workflow in a SharePoint Online Tenant

    I have a scenario where I need to be able to make calls to a secured web service from a SharePoint 2013 workflow that will be deployed in a SharePoint Online (Office 365) environment. It is a REST web service that is secured in a 2-legged OAuth-like manner
    (the service expects a hash of the data being sent that can then be validated on the service's end of the communication). The problem is, I can't figure out how I can hash the data, since I can't run any server-side code in the SharePoint Online environment.
    The way I figured this should work is 1) user creates an item in a List on the SharePoint Site, which kicks off the workflow process. 2) the workflow process takes the user data and hashes it using a client secret assigned by the web service. 3) the
    workflow creates a web request to the web service, passing the data and the hashed values. 4) the web service processes the input and returns. 5) the workflow continues to the next step.
    I can't figure out how to implement step 2 in that process. I thought I could do a custom workflow activity that would accomplish it, but since it would pretty much have to be a code-based activity (i.e., not declarative), it can't be deployed in SharePoint
    Online, according to the domentation I've found. I could potentially add a third layer in the process and have an auto-hosted app that I could call to do the hashing of the data, but that seems to defeat the purpose somewhat from a security perspective.
    Has anyone else run into this kind of scenario? Doing this in an on-premesis environment would be easy, but that's not really an option.
    Thanks!

    You should implement this by passing the values to a public (forms based auth) web method (secure over SSL) that does the hash for you and returns the value to your workflow so that it can pass it on to the other service.
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • ADF Mobile - Security. Serving custom, non-j2ee security policies.

    We are trying to achieve session management across our ADF Mobile app.
    We were hoping to use the ADF Mobile inbuilt security framework.
    However our Mobile App is simply a UI interface to a large Enterprise App which already has a custom security framework(entirely database based) in place.
    The enterprise app exposes RESTful interfaces(JAX-RS-Jersey) for functionality which the mobile app consumes.
    This question has broadly 2 parts to it.
    1. Does ADF Mobile inbuilt security work ONLY with J2ee container managed security realm service?
    2. Can ADF Mobile inbuilt security be made to work with a custom application security framework?
    Following are the challenges we face in dealing with the 2nd question,
    2a. We need to extricate the Username and Password from the request as sent by the ADF Mobile default login page
    2b. Based on the authenticated state(using custom security framework) assign Roles to the user and set the response.
    2c. In the Mobile app use the custom roles to drive UI.
    2d. One of the statements in the documentation says that irrespective of successful or failed login the Springboard will be visible. Can this be prevented?
    2e. Can we maintain session while achieving the last 4?
    Using the following JAX-RS annotations it has been impossible to retrieve any user credentials at our webservice end.
    @Context SecurityContext, @Context HttpServletRequest, @CookieParams,  @HeaderParam

    Hi,
    here's how you do it
    - application roles are defined in jazn-data.xml
    - Write a custom JAAS LoginModule that authenticates against the database
    - Create WLS authentication provider for your JAAS LoginModule and configure it in WLS
    - LoginModule returns principal for user and the user group memberships
    - User logs in via login.jspx
    - WLS authenticates user
    - Security context is updated with user and user roles
    Frank

  • UserName for non ADF secured app

    I am struggling to find the appropriate binding to access the logged in user for an 11G worklist application that is not secured by ADF so that I can pass it to a newly introduced service. I've tried several different values and most are unpopulated. ADF documentation leads me to believe the following should work but it is blank as well:
    #{data.adfContext.enterpriseName}
    I'm currently employing a workaround assessing the worklist systemAttributes.assignees but that doesn't seem to be dynamic through Claim/Release for group activity.
    The data input for 'Logged in as' is what I'm really after.
    Thanks in advance.

    Hi,
    in ADF you use #{securityContext.userName}. If the user is not web authenticated, then this however will not return the username. You need to know how worklist is authenticating users and if this is nit with server authentication, where this information is stored in
    Frank

  • Basic (non-paranoid) security

    Hi, everybody,
    I've done a modest research on the forums. There emerged certain keywords, like iptables, chkrootkit,  rkhunter, tripwire, and snort. The question is: am I reasonably safe just running the Arch "as is"? If not quite, are there "fire and forget" security solutions?
    I'm just an ordinary Internet user: firefox, ktorrent;
    I don't live in the root account;
    I don't build packages in the root account;
    That's pretty much it. I don't care to know more about security measures than I absolutely have to.

    According to the chicha idea I'd say... Why don't you turn off your computer put it inside a steel box, weld it and send it to a friendly military base? That's security!
    You are safe if you do not use your computer!
    Joking a part, if you do not have an hardware firewall or a NAT using iptables is a good idea imo.
    But yes, if you avoid living in root you are reasonable safe as is.
    About building packages in root is (always imo) overrated as risk. I saw some ugly made PKGBUILD that make unusable packages is some situation (e.g they rely on user umask value), but I never seen a PKGBUILD (from both aur or abs) were builiding damages the system.
    Surely, even if not risky... why doing it?
    A little script I used to configure iptables.
    #!/bin/sh
    # firewall.sh
    if [ "`/usr/bin/id -u`" != 0 ]
    then
    echo "`basename $0`": you need to be root to do that.
    exit 1
    fi
    iptables --policy INPUT DROP
    iptables --policy FORWARD DROP
    iptables --flush # Flush all rules, but keep policies
    iptables --delete-chain
    ### Basic firewall rules ###
    iptables --policy FORWARD DROP
    iptables --policy INPUT DROP
    iptables --append INPUT -i lo --source 127.0.0.1 --destination 127.0.0.1 -j ACCEPT
    iptables --append INPUT -m state --state "ESTABLISHED,RELATED" -j ACCEPT
    ### icmp services ###
    #iptables --append INPUT -p icmp --icmp-type destination-unreachable -j ACCEPT
    #iptables --append INPUT -p icmp --icmp-type time-exceeded -j ACCEPT
    #iptables --append INPUT -p icmp --icmp-type echo-request -j ACCEPT
    #iptables --append INPUT -p icmp --icmp-type echo-reply -j ACCEPT
    ### Open ports ###
    #Bittorrent, ten downloads at time
    #iptables --append INPUT -p tcp --dport 6881:6890 -j ACCEPT
    #Utorrent
    #iptables --append INPUT -p tcp --dport 41688 -j ACCEPT
    #aDonkey network
    #iptables --append INPUT -p tcp --dport 4662 -j ACCEPT
    #iptables --append INPUT -p udp --dport 4672 -j ACCEPT
    #ssh server
    iptables --append INPUT -p tcp --dport 22 -j ACCEPT
    #skype
    #iptables --append INPUT -p tcp --dport 59945 -j ACCEPT
    #http server
    #iptables --append INPUT -p tcp --dport 80 -j ACCEPT
    #https server
    #iptables --append INPUT -p tcp --dport https -j ACCEPT
    ### Limits the logging to 40 entries per minute ###
    iptables --append INPUT -j LOG -m limit --limit 40/minute
    ### Everything other is dropped ###
    iptables --append INPUT -j DROP
    ### Finally saves the settings for the next reboot.
    iptables-save > /etc/iptables/iptables.rules
    echo "`basename $0`": Done.
    Last edited by ezzetabi (2008-05-15 09:22:39)

  • Excel documents attempting to use non-existing Secure Store target application for unattended account

    Hey,
    I have been brought in to take a look at a few errors experienced on a SharePoint 2013 farm that will be used for BI functionality. One of the errors is the following:
    This happens when I attempt to refresh a Excel document that is using an unattended account. The application that it attempts to access (named in the error) does not exist in the Secure Store Service. I have checked the Excel Service Global Settings
    and the Target Application ID of the Unattended Service Account does not match what is given in the error (but matches a target application id that exists).
    Is there anywhere that you can override the global settings of the excel service? Is there something else that might be wrong?
    Any help is appreciated.
    Regards
    Knut

    Hi Knut,
    Thank you for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Non-sso security in weblogic10.3

    Hi,
    I have an application which configured nonsso by jazn in OC4J. I want to migrated the same to weblogic10.3.
    How to do the nonsso configuration by jazn in weblogic10.3. My application is not having ADF and LDAP.
    your help will be appriciated.
    Regards,
    Raveen

    Hi,
    It always better to compile your code when there is major version change. Lot had changed between weblogic 7 and 10 and including JAVA API standards. Below the detail explanation for JAVA API which explains clearly why you are seeing this error.
    "Thrown when an application tries to call an abstract method. Normally, this error is caught by the compiler; this error can only occur at run time if the definition of some class has incompatibly changed since the currently executing method was last compiled."
    Thanks.
    Vijay Bheemineni.

  • Support for non-proprietary secure encrypt&sign format?

    Hi,
    I want to embed data in my application which I have encrypted and signed using strong cryptography, so that the application can verify the data (assuming the application itself doesn't get changed).
    Currently I construct three byte[] arrays:
    1.) DESede encrypted data
    2.) RSA encrypted DESede key
    3.) Signature of unencrypted data using the
    Signature signature = Signature.getInstance("SHA1withRSA")
    signature.initSign(rsaPrivateKey)
    signature.update(unencryptedData)
    I turn each of these three byte[]s into Strings using Base64Coder and then concatenate them ":" separated.
    While this works (I can decrypt and verify the data), the format in which I represent the encrypted and signed data (Base64 encoding and ":" separation) is not any widely used standard and also doesn't contain any metadata about the encryption algorithm used, as would e.g. a gnupg encrypted block.
    So I was wondering, why is there no static method in the JCE that just says
    String or byte[] encrypted = SomeClass.encryptAndSign(data, "RSAwithDESede")
    or something like that, which then encrypts and signs the data according to some standard format? E.g. such that I could then decrypt and verify the data with PGP/GnuPG/OpenSSL/... ?
    Is there any library that does this, and which preferrably provides a simple facade to the complexity of JCE?
    Any help is appreciated - thanks in advance!
    Tobias

    Other standards have addressed this problem. See XML Encryption (http://www.w3.org/Encryption/2001/) and XML Signature (http://www.w3.org/Signature/).
    XML Signature is now a standard component of J2SE 6.0 (http://java.sun.com/javase/6/docs/technotes/guides/security/xmldsig/XMLDigitalSignature.html)

  • How to execute WebLogic security related commnads?

    Hello All
    I am just learning Oracle WebLogic and humbly request you for all your help. I installed Oracle WebLogic Server 11g Release 1 (10.3.3) on my Windows XP desktop. I could able create and cluster manage servers, configure WebLogic plug-in to Sun Java Web Server (I installed that on my Windows XP desktop) etc. Now I am reading the documentation about security and wants to run some of the commands as shown below
    1) weblogic.security.SSL.protocolVersion (Command-line argument lets you specify which protocol is used for SSL connections)
    2) Dweblogic.security.SSL.enableJSSE=true|false (System property to enable and disable JSSE SSL)
    I am not sure how to execute this commands. As I cannot execute these commands from the AdminServer console, the only way left is C:\ prompt on my desktop. So I figured out the security directory under C:\Oracle\Middleware\user_projects\domains\Domain1\security on my desktop and tried to execute the commands unsuccessfully from C:\
    C:\Oracle\Middleware\user_projects\domains\Domain1\security>weblogic.security.SSL.protocolVersion
    'weblogic.security.SSL.protocolVersion' is not recognized as an internal or exte
    rnal command,
    operable program or batch file.
    Where I can execute these commands and your help is very much appreciatecd?
    Thanks

    Hi,
    "weblogic.security.SSL.protocolVersion" is only a System property Not a Executable command. This flag is just to tell the JVM to use which version of SSL implementation. This is a System Property which is needs to be enabled in the JAVA_OPTION part of your JVM/Server startScript.
    Like if you are starting WebLogic server then U must apply this System property in the server start Scipt JAVA_OPTION variable:
    Edit Apply the "startWebLogic.sh" and then add the following like below:
    <font color=maroon> *export JAVA_OPTION="${JAVA_OPTIONS} -Xmx1024m -Xms1024m -Dweblogic.security.SSL.protocolVersion=SSL3"* </font>
    Below are the meaning of this flag values.
    -Dweblogic.security.SSL.protocolVersion=SSL3—Only SSL V3.0 messages are sent and accepted.
    -Dweblogic.security.SSL.protocolVersion=TLS1—Only TLS V1.0 messages are sent and accepted.
    -Dweblogic.security.SSL.protocolVersion=ALL—This is the default behavior.
    Or Suppose if you want to run some standalone Java Program which Uses SSL and if you want to tell the JVM to use SSL3 implementation then you can do something like this:
    *java <font color=red>-Dweblogic.security.SSL.protocolVersion=SSL3</font> HelloWorld*
    Thanks
    Jay SenSharma
    *http://middlewaremagic.com/weblogic (Middleware Magic Is Here)*

  • JMS MODULE SECURITY IN WEBLOGIC

    Hi,
    I have one JMS Module that having two queues. I have to create the one user who will read and write the data.
    That user do not have the access to the console so that this user will not create and delete resources in the server as well start and stop the server.
    Could you please help me how to put the security for that user?
    I have already tried below mentioned  steps, but this is only for securing queues with indidual user.
    http://weblogic-wonders.com/weblogic/2011/02/01/securing-weblogic-jms-resources/
    Advance Thanks,
    Anil.

    Hi Arun,
    A NullPointerException is almost always an indication of a bug (99% of the time), and rarely an indicator of user error.
    If the NPE is thrown by WebLogic code (and not app code), I recommend filing a customer support case (or if you happen to be on old version or service-pack, updating to the latest).
    As for your configuration change, it will very likely take effect upon a cluster restart regardless of the NPE - (the NPE, based on your description, is likely a localized problem with the console). You can check your JMS module XML to see if the console change was reflected in the configuration file...
    Tom

  • Why are all posts non secured?

    I can't read any of the posts as none are secured content. Which makes logging in somewhat pointless, ditto the padlock and the https.  

    I access the site using HTTPS and while it uses an older cypher it works fine for me and I have full visibility of the site.

  • Error starting managed server weblogic 10.3.5

    hi my jdeveloper is 11.1.2.0 and my weblogic is 10.3.5 am having error when trying to start my managed server
    the error am geting is
    or
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(X
    AConnectionEnvFactory.java:494)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(X
    AConnectionEnvFactory.java:177)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourceP
    oolImpl.java:1249)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourceP
    oolImpl.java:1166)
            at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
    java:249)
            Truncated. see log file for complete stacktrace
    >
    <24 Jan 2014 11:03:14 AM> <Warning> <JDBC> <BEA-001129> <Received exception whil
    e creating connection for pool "jdbc/HRDS": Listener refused the connection with
    the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descript
    or
    >
    <24 Jan 2014 11:03:15 AM> <Error> <Deployer> <BEA-149205> <Failed to initialize
    the application 'jdbc/HRDS' due to error weblogic.application.ModuleException: .
    weblogic.application.ModuleException:
            at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
            at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(Modu
    leListenerInvoker.java:199)
            at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(Depl
    oymentCallbackFlow.java:517)
            at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
    river.java:52)
            at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(Dep
    loymentCallbackFlow.java:159)
            Truncated. see log file for complete stacktrace
    Caused By: weblogic.common.ResourceException: Listener refused the connection wi
    th the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descript
    or
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(X
    AConnectionEnvFactory.java:494)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(X
    AConnectionEnvFactory.java:177)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourceP
    oolImpl.java:1249)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourceP
    oolImpl.java:1166)
            at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
    java:249)
            Truncated. see log file for complete stacktrace
    >
    <24 Jan 2014 11:03:17 AM> <Error> <Deployer> <BEA-149205> <Failed to initialize
    the application 'wsm-pm' due to error weblogic.management.DeploymentException: [
    J2EE:160149]Error while processing library references. Unresolved application li
    brary references, defined in weblogic-application.xml: [Extension-Name: oracle.w
    sm.seedpolicies, Specification-Version: 11.1.1, Implementation-Version: 11.1.1,
    exact-match: false]..
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing lib
    rary references. Unresolved application library references, defined in weblogic-
    application.xml: [Extension-Name: oracle.wsm.seedpolicies, Specification-Version
    : 11.1.1, Implementation-Version: 11.1.1, exact-match: false].
            at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(
    CheckLibraryReferenceFlow.java:26)
            at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.ja
    va:613)
            at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
    river.java:52)
            at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.j
    ava:184)
            at weblogic.application.internal.EarDeployment.prepare(EarDeployment.jav
    a:58)
            Truncated. see log file for complete stacktrace
    >
    <24 Jan 2014 11:03:18 AM> <Notice> <SipServer.Resource> <BEA-332401> <Initializi
    ng SipServer Resource with configuration com.bea.wcp.sip.management.descriptor.b
    eans.SipServerBeanImpl>
    <24 Jan 2014 11:03:18 AM> <Notice> <WLSS.Engine> <BEA-330071> <WebLogic Sip Serv
    er "madimad-b533821" patch version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:3
    3 PST 2010 1384255
    Javax Server Pages  Client Capable 1.2 Tue Jul 13 02:43:41 EDT 2010
    Expression Language 2.1 for JSP 1.0 Sun Jul 18 23:17:34 PDT 2010
    Javax Enterprise Servlets  Client Capable 1.0 Thu Aug 2 12:41:25 EDT 2007
    Eclipse Java Development Tools 3.5.2 Thu Sep 2 09:47:11 EDT 2010
    WebLogic java compiler utils package Client Capable 1.2 Thu Feb 11 03:38:50 EST
    2010
    WebLogic WebApp Container Public API Client Capable 1.4 Fri Oct 1 20:01:15 PDT 2
    010
    Oracle WebLogic Server Module Dependencies 10.3 Thu Oct 28 06:03:12 PDT 2010
    ANTLR Java based compiler generator Client 2.7 Mon Jun 11 12:19:48 EDT 2007
    WebLogic Descriptors for J2EE 1.5 Wed May 5 14:32:58 EDT 2010
    WebLogic Descriptors for J2EE 1.5 Binding Bundle
    WebLogic Specific Descriptors 1.3 Tue Sep 14 18:48:42 PDT 2010
    WebLogic Specific Descriptors 1.3 Binding Bundle
    WebLogic Datasource 1.9 Tue Oct 26 13:50:26 PDT 2010
    WebLogic Datasource 1.9 Binding Bundle
    WebLogic Beangen Client Capable 1.7 Wed Feb 24 16:02:48 PST 2010
    WebLogic Beangen 1.7 Binding Bundle
    WLDF Accessor Client Capable 1.5 Fri Sep 3 17:10:52 EDT 2010
    WLDF Accessor 1.5 Binding Bundle
    WebLogic Management Core Interfaces Client Capable 2.8 Wed Aug 11 08:20:03 PDT 2
    010
    WebLogic Management Core Interfaces 2.8 Binding Bundle
    WebLogic EJBGen Client Capable 1.1 Thu Jun 3 13:17:07 EDT 2010
    Apache Byte Code Engineering Library (BCEL) extracted from 5.2.zip from http://j
    akarta.apache.org/site/downloads/downloads_bcel.cgi with packages renamed from o
    rg.apache.bcel to com.bea.core.repackaged.apache.bcel Client 5.2 Tue May 15 09:5
    2:37 EDT 2007
    Apache commons collections package 3.2 Tue Mar 20 15:48:25 MDT 2007
    Apache commons lang package 2.1 Tue Mar 20 15:48:30 MDT 2007
    Apache commons pool package 1.3 Tue Mar 20 15:48:36 MDT 2007
    Apache commons io 1.4 package 1.0 Wed Jun 2 17:36:36 EDT 2010
    Apache commons fileupload 1.2.1 package 1.0 Wed Jun 2 17:36:36 EDT 2010
    Apache DOM implementation 1.0 Tue Mar 20 15:36:46 MDT 2007
    Apache Logging Support 1.0 Tue Mar 20 15:36:50 MDT 2007
    Apache OpenJPA classes 1.2 Thu Jul 22 05:16:07 EDT 2010
    XMLBeans - Apache SVN rev 962560 2.1 Thu Jul 15 09:52:54 EDT 2010
    BEA Logging Runtime Support Client Capable 1.8 Mon Jun 7 12:07:02 PDT 2010
    BEA Common Security Open SAML 1.0 Fri May 14 20:18:10 PDT 2010
    BEA OpenSAML 2.0 1.0 Wed Mar 24 13:18:27 PDT 2010
    bea-harvester-api2.0 Client Capable 2.3 Mon Feb 15 14:41:06 EST 2010
    bea-harvester-jmx2.0 Client Capable 2.3 Wed Feb 3 11:54:03 PST 2010
    bea-harvester-utils Client Capable 1.4 Mon Feb 15 14:41:06 EST 2010
    bea-mbean-typing-util 1.4 Wed Feb 24 19:15:33 EST 2010
    Javolution 3.7.19 3.7 Tue Aug 28 17:32:21 PDT 2007
    Joda-time 1.2.1 1.2 Tue Aug 28 17:32:27 PDT 2007
    BEA STAX Build Time Support 1.5 Tue May 4 07:32:25 PDT 2010
    BEA STAX Runtime Time Support Client Capable 1.7 Wed Aug 4 19:40:47 EDT 2010
    BEA Generic Annotations Client Capable 1.3 Sat Jul 11 00:30:54 EDT 2009
    BEA Kodo 1.3 Tue Dec 7 12:34:59 PST 2010
    BEA Kodo Integration Client Capable 1.6 Sun Nov 22 16:29:06 PST 2009
    BEA Kodo Integration 1.6 Binding Bundle
    BEA Kodo Integration Tools 1.3 Sat Feb 13 09:30:33 PST 2010
    XML Beans Marshalling (package renamed com.bea) SVN 962560 2.2 Thu Jul 15 09:52:
    54 EDT 2010
    WebLogic Utils Client Capable 1.9 Thu Nov 11 13:50:07 PST 2010
    Aspect 5.3 Fri Jun 4 14:55:18 PDT 2010
    BEA Apache Commons Logging Repackaged 1.2 Mon Jun 11 12:47:12 EDT 2007
    Spring Framework  1.1 Thu Dec 3 12:21:08 EST 2009
    Pitchfork 1.3 Thu Jun 3 13:17:07 EDT 2010
    ${description} 1.2 Fri Jun 25 16:25:26 EDT 2010
    CSS i18n 1.0 Fri Oct 8 10:32:52 EDT 2010
    CSS xacml 1.0 Fri Oct 8 10:32:52 EDT 2010
    SAML2 Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
    BEA Common Security Engine Implementation 1.0 Fri Oct 8 10:32:52 EDT 2010
    BEA Common Security Engine Interfaces 1.0 Fri Oct 8 10:32:52 EDT 2010
    BEA Common Security API 1.0 Fri Oct 8 10:32:52 EDT 2010
    BEA Common Security Implementation 1.0 Fri Oct 8 10:32:52 EDT 2010
    BEA Common Security JDK Utilities 1.0 Fri Oct 8 10:32:52 EDT 2010
    Security Utilities 1.0 Fri Oct 8 10:32:52 EDT 2010
    Common Security SAML 2.0 1.0 Fri Oct 8 10:32:52 EDT 2010
    Common Security SAML 2.0 Management JavaBeans 1.0 Fri Oct 8 10:32:52 EDT 2010
    Security Provider Utilities 1.0 Fri Oct 8 10:32:52 EDT 2010
    SAML Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
    XACML Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
    Security Provider Environment 1.0 Fri Oct 8 10:32:52 EDT 2010
    RSA certj 3.1 Wed May 5 15:11:55 PDT 2010
    Netscape LDAP JDK 1.2 Mon Jun 7 15:56:47 EDT 2010
    Commons Networking Utilty classes 1.0 Wed Feb 6 15:01:03 PST 2008
    WebLogic SAAJ 1.6 Wed Jun 16 22:02:31 EDT 2010
    WebLogic STAX Client Capable 1.8 Sat May 15 16:38:03 EDT 2010
    jaxb-impl.jar taken from Glassfish JAXB 2.1.9 1.0 Fri Aug 20 14:37:07 EDT 2010
    jaxb-impl.jar taken from Glassfish JAXB 2.1.12 1.0 Thu May 6 16:10:04 PDT 2010
    resolver.jar taken from Glassfish JAXWS 2.1.5 1.0 Thu Dec 3 11:46:24 EST 2009
    Fastinfoset.jar taken from Glassfish JAXWS 2.1.5 1.0 Thu Dec 3 11:46:27 EST 2009
    jaxws-rt.jar taken from Glassfish JAXWS 2.1.5 1.1 Wed Oct 13 20:37:41 PDT 2010
    Java.net implementation of MimePull.jar taken from Glassfish JAXWS 2.1.5 1.0 Thu
    Dec 3 11:46:33 EST 2009
    Codehaus STaX Interfaces 3.0.1 1.0 Mon Mar 8 20:49:50 PST 2010
    Woodstox STaX Parser 4.0.5 1.0 Thu Dec 3 11:35:43 EST 2009
    jaxws-tools.jar taken from Glassfish JAXWS 2.1.5 1.1 Fri Sep 24 17:55:05 PDT 201
    0
    Java.net Stax Extensions 1.0 Tue Jun 3 07:12:06 PDT 2008
    Java.net xml stream buffer 1.0 Tue Mar 17 05:24:12 PDT 2009
    Jakarta ORO  1.0 Wed Feb 6 15:01:03 PST 2008
    Javax Enterprise Activation 1.1 Tue Apr 8 09:31:17 PDT 2008
    Javax Annotation 1.0 Fri Dec 25 09:02:47 PST 2009
    Javax Interceptor 1.0 Tue Mar 20 15:37:16 MDT 2007
    Javax Enterprise Beans  3.0 Mon Jun 11 12:21:01 EDT 2007
    Java Data Objects 2.0 Mon Jun 11 12:20:56 EDT 2007
    Java Enterprise Deployment APIs  1.2 Tue Mar 20 15:37:28 MDT 2007
    Java Enterprise Messaging  1.1 Mon Jun 11 12:21:11 EDT 2007
    Java Web Services  2.0 Tue Mar 20 15:37:37 MDT 2007
    Javax Enterprise Mail 1.1 Mon Jul 6 10:41:09 MDT 2009
    Java Enterprise Management APIs  1.0 Tue Mar 20 15:37:49 MDT 2007
    Java Persistence Client Capable 1.0 Tue Oct 7 12:18:34 PDT 2008
    Java Connector  1.5 Mon Jun 11 12:22:07 EDT 2007
    Java Authorization Contract for Containers 1.0 Wed Feb 6 15:01:03 PST 2008
    Javax Transaction APIs  Client Capable 1.0 Thu Aug 2 12:42:14 EDT 2007
    JAXB 2.1 Mon Jun 11 12:22:53 EDT 2007
    Java XML Registry 1.0 Wed Feb 6 15:01:03 PST 2008
    Java XML Soap Extensions 1.3 Mon Jun 11 12:22:59 EDT 2007
    Java Stream XML Extensions 1.1 Mon Jun 11 12:23:05 EDT 2007
    JAX-WS APIs 2.1 Mon Jun 11 12:23:16 EDT 2007
    Java API for XML-based RPC   1.2 Mon Jun 11 12:23:10 EDT 2007
    Monfox Dynamic SNMP Agent 1.1 Fri Mar 19 05:46:27 MDT 2010
    Serp bytecode manipulation framework 1.14.3 Fri Jun 11 12:06:08 PDT 2010
    WebLogic Apache Classes Client Capable 1.2 Thu Feb 18 22:06:19 PST 2010
    WebLogic BeanInfo Caching and Discovery Client Capable 2.4 Sat Oct 25 20:46:29 P
    DT 2008
    WebLogic Descriptor Client Capable 1.9 Tue Jul 20 16:03:09 EDT 2010
    Repackaged ASM-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
    Repackaged asm-commons-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
    Repackaged asm-tree-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
    Repackaged asm-util-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
    Oracle JFR 1.0 Thu Feb 18 19:06:33 PST 2010
    WebLogic Diagnostics Core Interfaces Client Capable 2.5 Thu Jun 3 05:20:41 PDT 2
    010
    WebLogic Diagnostics Logging Client Capable 1.2 Fri Dec 12 11:37:59 MST 2008
    WebLogic Diagnostics Query Module Client Capable 1.2 Tue Oct 27 02:48:36 PDT 200
    9
    WebLogic Diagnostics Instrumentor Tool 1.7 Tue May 18 03:51:46 PDT 2010
    WebLogic Diagnostics Instrumentor Config Tool 1.7 Tue Jun 29 16:41:19 EDT 2010
    WebLogic Diagnostics JRockit Flight Recorder Interfaces Client Capable 1.1 Fri O
    ct 29 16:32:05 EDT 2010
    Diagnostics Notifications Module Client Capable 1.4 Sun Nov 22 16:03:32 PST 2009
    BEA Logging Runtime Support Client Capable 1.5 Thu Apr 29 20:43:42 EDT 2010
    WebLogic i18n Runtime Support Client Capable 1.8 Fri Sep 10 08:12:34 EDT 2010
    WebLogic i18n Build Support Client Capable 1.5 Fri Feb 19 15:03:15 EST 2010
    WebLogic I18N tools Client Capable 1.3 Sun Nov 22 16:03:32 PST 2009
    WebLogic Management JMX Interfaces 1.4 Thu Aug 12 11:16:22 PDT 2010
    WebLogic Security Provider Generation Tool 1.5 Wed Oct 14 16:39:28 MDT 2009
    WebLogic Security Provider Generation Tool Client Capable 1.5 Wed Oct 14 16:39:2
    8 MDT 2009
    WebLogic Messaging Kernel Client Capable 1.8 Mon Aug 23 21:42:11 EDT 2010
    WebLogic Resource Pool Client Capable 1.7 Mon Sep 27 12:00:08 EDT 2010
    WebLogic Socket Muxer API Client Capable 1.2 Thu Apr 1 21:16:27 EDT 2010
    WebLogic RMI Client Capable 1.8 Fri Sep 24 18:35:21 EDT 2010
    Common Security WebLogic Server Integration Support  1.0 Fri Oct 8 10:32:52 EDT
    2010
    Server Lifecycle Interfaces Client Capable 1.4 Fri Feb 19 15:03:15 EST 2010
    WebLogic Store Client Capable 1.7 Fri Dec 17 16:52:31 EST 2010
    WebLogic STORE GXA Client Capable 1.6 Mon Aug 23 21:16:10 EDT 2010
    WebLogic Store Admin Tool Client Capable 1.2 Thu Jan 21 10:24:18 PST 2010
    WebLogic JDBC Store Client Capable 1.3 Mon May 17 10:46:33 PDT 2010
    WebLogic JTA implementation Client Capable 2.7 Fri Sep 17 12:19:45 PDT 2010
    WebLogic Utils 1.9 Thu Nov 11 13:50:07 PST 2010
    Agent Utililities 1.1 Tue Feb 16 00:16:03 EST 2010
    WebLogic Utility Classloader implementations Client Capable 1.8 Mon Jun 28 19:28
    :16 PDT 2010
    WebLogic Utils for working with Expressions Client Capable 1.4 Tue Sep 29 14:45:
    53 EDT 2009
    WebLogic Utils for Dynamically Generated Class Wrappers Client Capable 1.4 Fri F
    eb 13 14:44:23 MST 2009
    WebLogic Timers Client Capable 1.7 Thu Feb 18 13:08:44 EST 2010
    WebLogic Work Manager Client Capable 1.9 Mon Oct 11 18:25:35 EDT 2010
    WebLogic Workarea Client Capable 1.7 Wed Feb 24 17:18:56 PST 2010
    WebLogic XML XPath Implementation Client Capable 1.4 Mon Feb 22 15:07:14 PST 201
    0
    Weblogic Tuxedo Connector Core Client Capable 1.5 Sat Jul 3 19:05:38 EDT 2010
    WebLogic Security 1.0 Fri Oct 8 10:32:52 EDT 2010
    Weblogic Server Java Authentication Helper Classes Client Capable 1.1 Mon Jul 5
    20:42:35 EDT 2010
    Weblogic Server Message Digest Utilities Client Capable 1.0 Thu Aug 2 12:51:30 E
    DT 2007
    Weblogic Server Authenticated Subject Client Capable 1.1 Thu Oct 28 05:46:37 PDT
    2010
    Weblogic Server Authenticated Subject Client Capable 1.5 Thu Sep 9 10:23:21 MDT
    2010
    PrintingSecurityManager - PSM 1.1 Tue Feb 16 05:30:08 PST 2010
    WebLogic security ssl classes 1.0 Tue Jun 15 17:39:53 EDT 2010
    WebLogic Nodemanager Plugin Client Capable 1.3 Tue Nov 18 18:23:10 EST 2008
    nodemanager module for managed processes 1.0 Thu Apr 8 15:14:38 PDT 2010
    WebLogic JMS Pool Client Capable 1.7 Mon Sep 27 12:00:08 EDT 2010
    Contains compiled schema type from WLS 9.0 for WLP compatibility 1.3 Wed Feb 24
    19:15:33 EST 2010
    WebLogic Http Pub/Sub Module Client Capable 1.6 Mon Jul 12 02:31:07 EDT 2010
    Class Redefinition Project 1.5 Mon May 10 19:48:21 EDT 2010
    Class Redefinition Project Client Capable 1.5 Mon Apr 5 17:00:52 PDT 2010
    Class Redefinition Project 1.5 Binding Bundle
    Commonj SDO 1.0 Wed Sep 24 19:11:23 PDT 2008
    WebLogic Coherence Descriptor 1.1 Wed May 5 15:17:47 EDT 2010
    WebLogic Coherence Descriptor 1.1 Binding Bundle
    This module contains all message catalogs 1.1 Fri Dec 17 08:04:35 PST 2010
    WebLogic WebService Public API's 1.1 Tue Sep 21 22:15:05 EDT 2010
    WebLogic EclipseLink Integration 1.0 Thu Feb 25 14:56:43 PST 2010
    WebLogic SCA Client 1.0 Thu Feb 25 00:27:10 EST 2010
    WebLogic RAC Module UCP Client Capable 1.0 Mon Sep 13 09:03:00 PDT 2010
    Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu S
    ep 23 15:02:15 PDT 2010
    BEA Patches of apache ant Client Capable 1.2 Wed Jan 13 08:48:17 PST 2010
    Oracle WebLogic Server 10.3.4.0 at 710154 built on: 2010/09/30
    Oracle WebLogic Server 10.3.4.0 at 710154 built on: 2010/09/30
    Oracle WebLogic Server Datatier 10.3.4.0 at 710154 built on: 2010/09/30
    Oracle WebLogic Server 10.3.4.0 at 710154 built on: 2010/09/30
    WebLogic SIPServer Extension API 10.3.4.0 at 709997 built on 2010/09/27
    WebLogic SIPServer Extension API 10.3.4 at 709997 built on 2010/09/27
    WebLogic SIPServer CallState 10.3.4 at 709997 built on 2010/09/27
    Oracle WebLogic Communications SCTP 10.3.1 at 688160 built on 2009/03/11
    WebLogic WebService Databinding Plugins 1.2 Fri Oct 15 07:38:46 PDT 2010
    WebLogic WebService Databinding 1.2 Fri Oct 15 06:35:13 PDT 2010
    WebLogic SIP Activator 10.3.4 at 710163 built on 2010/09/30
    >
    <24 Jan 2014 11:03:25 AM> <Error> <WLSS.Engine> <BEA-330075> <There are no sip n
    or diameter channels targeted to server "madimad-b533821">
    <24 Jan 2014 11:03:25 AM> <Error> <WLSS.Engine> <BEA-330049> <Failed to start th
    e sip service, shutting down>
    C:\mydomain\base_domain\bin>

    i did but there is no respond
    i started the database
    C:\mydomain\base_domain\bin>startManagedWebLogic.cmd madimad-b533821
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
    128m  -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
    :\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\mywls\wlserver\server\lib\weblogic_
    sp.jar;C:\mywls\wlserver\server\lib\weblogic.jar;C:\mywls\modules\features\weblo
    gic.server.modules_10.3.4.0.jar;C:\mywls\wlserver\server\lib\webservices.jar;C:\
    mywls\modules\ORGAPA~1.1/lib/ant-all.jar;C:\mywls\modules\NETSFA~1.0_1/lib/ant-c
    ontrib.jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:
    \Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\mywls\wlserver\co
    mmon\derby\lib\derbyclient.jar;C:\mywls\wlserver\server\lib\xqrl.jar
    PATH=;C:\mywls\wlserver\server\native\win\32;C:\mywls\wlserver\server\bin;C:\myw
    ls\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\
    JDK16~1.0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbh
    ome_1\bin;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program
    Files\PHP;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Fil
    es\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Share
    d\DLLShared;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program
    Files\Common Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program
    Files\Common Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Rox
    io Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:
    \mywls;C:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Prog
    ram Files\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Fil
    es\Java\jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\
    jre6;C:\DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\f
    orms;C:\forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\mywls\wlserv
    er\server\native\win\32\oci920_8
    *  To start WebLogic Server, use a username and   *
    *  password assigned to an admin-level user.  For *
    *  server administration, use the WebLogic Server *
    *  console at http:\\hostname:port\console        *
    starting weblogic with Java version:
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
    Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client   -Xms256m -Xmx512m -XX:CompileThr
    eshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m -Dweblogic.Name=madimad-b533
    821 -Djava.security.policy=C:\mywls\wlserver\server\lib\weblogic.policy -Dweblog
    ic.security.SSL.trustedCAKeyStore="C:\mywls\wlserver\server\lib\cacerts"  -Xveri
    fy:none -ea:com.bea.wcp...   -da -Dplatform.home=C:\mywls\wlserver -Dwls.home=C:
    \mywls\wlserver\server -Dweblogic.home=C:\mywls\wlserver\server  -Dcommon.compon
    ents.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.
    logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomai
    n\BASE_D~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1
    .1\jrocket_optfile.txt -Doracle.server.config.dir=C:\mydomain\BASE_D~1\config\FM
    WCON~1\servers\madimad-b533821 -Doracle.domain.config.dir=C:\mydomain\BASE_D~1\c
    onfig\FMWCON~1  -Digf.arisidbeans.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\
    carml  -Digf.arisidstack.home=C:\mydomain\BASE_D~1\config\FMWCON~1\arisidprovide
    r -Doracle.security.jps.config=C:\mydomain\BASE_D~1\config\fmwconfig\jps-config.
    xml -Doracle.deployed.app.dir=C:\mydomain\BASE_D~1\servers\madimad-b533821\tmp\_
    WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracl
    e\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\mo
    dules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.prot
    ocol  -Dweblogic.jdbc.remoteEnabled=false  -Dweblogic.management.discover=false
    -Dweblogic.management.server=http://madimad-b533821:7001  -Dwlw.iterativeDev=fal
    se -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false  weblogic.Server
    <24 Jan 2014 12:52:41 PM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
    Provider self-integrity check for better startup performance. To enable this che
    ck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <24 Jan 2014 12:52:42 PM> <Info> <Security> <BEA-090906> <Changing the default R
    andom Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable thi
    s change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <24 Jan 2014 12:52:42 PM> <Notice> <WebLogicServer> <BEA-000395> <Following exte
    nsions directory contents added to the end of the classpath:
    C:\mydomain\base_domain\lib\sipactivator.jar>
    <24 Jan 2014 12:52:42 PM> <Info> <Server> <BEA-002647> <The service plugin, com.
    oracle.core.sip.activator, was added from C:\mydomain\base_domain\lib\sipactivat
    or.jar.>
    <24 Jan 2014 12:52:42 PM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogi
    c Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsystems
    Inc.>
    <24 Jan 2014 12:52:45 PM> <Info> <Security> <BEA-090065> <Getting boot identity
    from user.>
    Enter username to boot WebLogic server:tshifhiwa
    Enter password to boot WebLogic server:
    <24 Jan 2014 12:52:57 PM> <Info> <Management> <BEA-141107> <Version: WebLogic Se
    rver 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <24 Jan 2014 12:53:01 PM> <Error> <Management> <BEA-141252> <The domain version,
    10.3.5.0, is greater than the release version, 10.3.4.0, of this server.>
    <24 Jan 2014 12:53:01 PM> <Error> <Configuration Management> <BEA-150001> <An er
    ror occurred while connecting to the admin server to bootstrap through URL: http
    ://madimad-b533821:7001/bea_wls_management_internal2/Bootstrap, user: tshifhiwa
    weblogic.management.configuration.ConfigurationException: [Management:141252]The
    domain version, 10.3.5.0, is greater than the release version, 10.3.4.0, of thi
    s server.
            at weblogic.management.provider.internal.BootStrapHelper.getBootStrapStr
    uct(BootStrapHelper.java:147)
            at weblogic.management.provider.internal.RuntimeAccessImpl.initialize(Ru
    ntimeAccessImpl.java:432)
            at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
    imeAccessService.java:49)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
    ager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
    icesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:879)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:566)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:467)
            at weblogic.Server.main(Server.java:71)
    >
    <24 Jan 2014 12:53:01 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
    hanged to STARTING>
    <24 Jan 2014 12:53:01 PM> <Info> <WorkManager> <BEA-002900> <Initializing self-t
    uning thread pool>
    <24 Jan 2014 12:53:02 PM> <Notice> <LoggingService> <BEA-320400> <The log file C
    :\mydomain\base_domain\servers\madimad-b533821\logs\madimad-b533821.log will be
    rotated. Reopen the log file if tailing has stopped. This can happen on some pla
    tforms like Windows.>
    <24 Jan 2014 12:53:02 PM> <Notice> <LoggingService> <BEA-320401> <The log file h
    as been rotated to C:\mydomain\base_domain\servers\madimad-b533821\logs\madimad-
    b533821.log00007. Log messages will continue to be logged in C:\mydomain\base_do
    main\servers\madimad-b533821\logs\madimad-b533821.log.>
    <24 Jan 2014 12:53:02 PM> <Notice> <Log Management> <BEA-170019> <The server log
    file C:\mydomain\base_domain\servers\madimad-b533821\logs\madimad-b533821.log i
    s opened. All server side log events will be written to this file.>
    <24 Jan 2014 12:54:25 PM> <Critical> <WebLogicServer> <BEA-000386> <Server subsy
    stem failed. Reason: java.lang.AssertionError: Assertion violated
    java.lang.AssertionError: Assertion violated
            at weblogic.utils.Debug.assertion(Debug.java:57)
            at weblogic.server.channels.ChannelService.getServerChannel(ChannelServi
    ce.java:2060)
            at weblogic.server.channels.ChannelService.getServerChannel(ChannelServi
    ce.java:1998)
            at weblogic.protocol.ServerChannelManager.findServerChannel(ServerChanne
    lManager.java:76)
            at weblogic.ldap.EmbeddedLDAP.findLdapURL(EmbeddedLDAP.java:1482)
            Truncated. see log file for complete stacktrace
    >
    <24 Jan 2014 12:54:26 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
    hanged to FAILED>
    <24 Jan 2014 12:54:26 PM> <Error> <WebLogicServer> <BEA-000383> <A critical serv
    ice failed. The server will shut itself down>
    <24 Jan 2014 12:54:26 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
    hanged to FORCE_SHUTTING_DOWN>

Maybe you are looking for

  • Multiple iPods / libraries on one computer

    Hi All and thanks in advance for any help you can give me. Until recently I have had three ipods with three different libraries all managed through one computer running Windows XP. I accessed the different libraries by clicking onto iTunes and holdin

  • Using jbo tags in 10.1.3 release 3

    I migrated some projects created in 10.1.2 to 10.1.3 as we have started using jsf but will also need to use some of our older code which uses jbo tags. When I try to run a jsp page using the <jbo:ApplicationModule .../> tag I get the following error:

  • Some paragraph tags are not printing when document is printed from Framemaker 10.

    So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Fra

  • Masking GL account in Manual Bank configuration

    I have done a new bank accounting configuration Created the new House bank and Bank accounts , with account key, mainly , main bank , clearing accounts and used the masking for Bank accounts . There are some old bank GL accounts in which last digit i

  • CSCur62528 - ISE loses network connectivity after upgrade to 1.3

    still not working with the new version .... appliance network cards still get messed up during upgrade process .