I now cannot access my live files in Dreamweaver

I created a new site in Dreamweaver.
Now I have finished the site which was intended to replace an old one. My brother who has the hosting package for the site said that I needed to create a site within the root folder called /public_html/new so that once it was complete he could transfer the files into the live site /public_html and make my old site public_html/old.(In case we need anything in the future)
All went well and the new site is up. However I am now left with an empty public_html/new folder when I go to the remote button. I need to correct some things that I(and others......I swear it is a case of 'cannot see the wood for the trees' when you have been working on it for a while) did not see before. I cannot connect with the live site because it is in a folder that is not in my dreamweaver site. I cannot do anything because although I have corrected my pages in local view on Dreamweaver when I go to remote to upload I only have the empty folder. I have tried changing the name but it will not let me. What can I do? I have tried synchonizing but that does not work as the public_html/new is not recognized and now has no function? Please please help me I am going mad! The site is up and there are errors that need to be corrected!
By the way you can see it at
http://nailandrockett.com
My brother has no knowledge of Dreamweaver. I am soooo stuck and going crazy!
Any help would be soooooo much appreciated!!!
Many thanks
Tina

Hi John,
No I seem to be having problems explaining this.
In Dreamweaver I have my root folder for the site that was created at the very begining of setting it up Nail-Rockett.
In local view under that I have all my files for the site.
In remote view I also had all the same files.
Under remote, under Nail-Rockett root folder a folder was created called public_html/new
In local this does not exist.
When the files were taken out of Nail-rockett - public_html/new to replace the site that was up they were put into the live folder called public_html.
In Dreamweaver when I go to remote I am left with the public_html/new folder that the files were put in but which is now empty because they have been moved to the live site.
I need to change the folder that says public_html/new in the remote view to public_html and put the files in there that I want to replace on the live site.
Please tell me this makes sense. I have all the files in local view but when I switch to remote I have the public_html/new which is of no use and I think that the files are not uploading because the folder on the site is public_html.
Thanks for your help but I am not further along and really need to make changes but cannot get into the remote site.
Tina

Similar Messages

I've downloaded Firefox 4, now cannot access Windows Live Mail and have spent many hours trying to resolve including uninstalling, system restore etc etc

I have a Sony Vaio Desktop (ie high spec) and have not had any software problems until I downloaded FF 4 and lost my WLM. I've tried so many ways to try to resolve this. The Sytem Restore is not working - ebven though I created a restore point for 4 May and disabled all the security settings etc.
I can access my WLM account on my work PC - but note that the address list has gone.
Really grateful for your help - thanks.
Eamon

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? Help!!

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...help?

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...
the new computer is a Mac.
I see the site on my computer files, but it will not connect with Dreamweaver on this new computer.
can anyone help with this?
thanks,
Margaret

no special characters...
see if this gives you any info...

I was using 3 version, downloaded 3.6 and cannot access my ADP files. Can I get the #3 version back.

I was using the #3 version, downloaded the 3.6 version and cannot access my ADP files now. Can I get the 3 version back?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up

I did a software update on my ipad and now cannot access the internet. how can i fix this?

I did a software update on my ipad to 8.1 and now cannot access the internet. How do I fix this? My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

When we purchased our mac two years ago, we set up the iCloud account. this past winter I created a new iCloud account thinking I was changing it. I now cannot access anything on the old iCloud acct and my computer hasn't been backed up either in awhile

when we purchased our mac two years ago, we set up the iCloud account. this past winter I created a new iCloud account thinking I was changing it. I now cannot access anything on the old iCloud acct and my computer hasn't been backed up either in awhile. How do i go back to that old account and delete it so that I can continue backing up on the newest account? I changed it because the original one I created an iCloud account with is a yahoo account email address and I am deleting my yahoo account for being compromised too may times.

Well, you can go to Manage your Apple ID and change the password if you can answer the Security Questions:
Apple - My Apple ID
If you cannot remember the Security Questions you can contact iTunes Support to reset them for you:
New iTunes Support - US and ww
Once you get your password reset and you can access your account info on Manage your Apple ID, you can change your ID. You won't be able to use the same email address that you are using for the new ID unless you change that one to something else. But, if you can get back into your old ID and change it to a new email address, then you can go on using that old ID, and just manually move the iCloud stuff you added to your new ID back onto the old one. Most of the stuff (like Contacts, Calendar, Notes) can be added by logging onto https://www.icloud.com on your Mac and doing it that way (it is a lot simpler when you have an actual keyboard in my opinion)
Hope this helps you to sort out the two ID business. If you have any questions, please post back!
Cheers,
GB

Cannot access a closed file error on adding a file to a library

I am trying to copy the attachments from a list to a document library. When I try to write into a document library, occasionally I am getting following error "The remote server returned an error: (500) Internal Server Error. Cannot access
a closed file. Cannot access a closed file. "
Any ideas on what is causing the problem. The code is specified below, The error message is specified after the code. Can you please let me know if I am missing anything. I cant find anything wrong in the code or in the library. The code is running as WCF
Service and the call to process this is made from Infopath form.
try
SPSecurity.RunWithElevatedPrivileges(delegate()
string siteURL = "Site URL";
using (SPSite site = new SPSite(siteURL))
SPWeb oWeb = site.OpenWeb();
SPList oList = oWeb.Lists["List Name"];
SPList docDestination = oWeb.Lists["Destination Library on same site"];
SPFolder fldRoot = oWeb.Folders["Destination Library on same site"];
SPFileCollection flColl = null;
SPQuery oQuery = new SPQuery();
oQuery.Query = "<Where><Eq>" + "<FieldRef Name=\"ID\"/><Value Type=\"Number\">" + RequestID + "</Value></Eq></Where>";
SPListItemCollection oItems = oList.GetItems(oQuery);
foreach (SPListItem lstItem in oItems)
if (lstItem["ID"].ToString() == RequestID)
if (lstItem.Attachments != null && lstItem.Attachments.Count > 0)
foreach (String strName in lstItem.Attachments)
flColl = fldRoot.Files;
SPListItem listtem = docDestination.Items.Add();
SPFile FileCopy = lstItem.ParentList.ParentWeb.GetFile(lstItem.Attachments.UrlPrefix + strName);
SPQuery oQueryDest = new SPQuery();
oQueryDest.Query = "<Where><Eq>" + "<FieldRef Name=\"Name\"/><Value Type=\"Text\">" + FileCopy.Name + "</Value></Eq></Where>";
SPListItemCollection collListItems = docDestination.GetItems(oQuery);
string destFile = flColl.Folder.Url + "/" + FileCopy.Name ;
if (collListItems.Count > 0)
String strFileNamePrfix = FileCopy.Name.Substring(0, FileCopy.Name.Length - 3);
strFileNamePrfix = strFileNamePrfix + "_" + collListItems.Count.ToString();
strFileNamePrfix = strFileNamePrfix + FileCopy.Name.Substring(FileCopy.Name.Length - 3,3);
destFile = flColl.Folder.Url + "/" + strFileNamePrfix;
byte[] fileData = FileCopy.OpenBinary();
Trace.WriteLine("Board Services dest file" + destFile + " Count = " + collListItems.Count.ToString());
SPFile flAdded = flColl.Add(destFile, fileData,true);
SPListItem item = flAdded.Item;
flAdded.Item.Update();
catch (Exception ex)
string strLogEntry = ex.Message.ToString() + ex.StackTrace.ToString();
finally
Form submission failed. (User: xxxxx, Form Name: Template, IP: , Request: http://Site Url/Lists/List name/Task/editifs.aspx?List=e6647e38-cb01-46b3-8bee-308357045532&ID=116&Source=http://Site URL/Lists/List Name/AllItems.aspx?View={CB9F3C2B-49DF-4D75-9720-1E7E000FD229}&FilterField1=Status&FilterValue1=Completed&IsDlg=1&Web=706d51c9-e509-40f3-884a-7d40e126ff14,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-12-06T16:11:54:747Z, Type: DataAdapterException, Exception Message: The remote server returned an error: (500) Internal Server Error. Cannot access a closed file. Cannot
access a closed file.
at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count)
The remote server returned an error: (500) Internal Server Error.)

Hi Dimitri,
Thank you, I tried increasing the timeout on web.config file of the wCF service and reloaded the config file.
<httpRuntime executionTimeout="90" maxRequestLength="20000" useFullyQualifiedRedirectUrl="false" requestLengthDiskThreshold="8192"/>
As the error
Form submission failed. (User: , Form Name: Template, IP: , Request: http://site /editifs.aspx?List=e6647e38-cb01-46b3-8bee-308357045532&ID=102&Source=http://site List/AllItems.aspx?View={cb9f3c2b-49df-4d75-9720-1e7e000fd229}&SortField=Status&SortDir=Asc&IsDlg=1&Web=706d51c9-e509-40f3-884a-7d40e126ff14#,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-12-06T16:11:54:747Z, Type: DataAdapterException, Exception Message: The remote server returned an error: (500) Internal Server Error. Cannot access a closed file. Cannot access
a closed file.
at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count)
is happening at following line
SPFile flAdded = flColl.Add(destFile, fileData,attachmentPropertiesHashTable ,true);
I only modified the timeout on the wcf service.
I dont think I need to change the timeout on the Webapplication which has this site?
Regards
Nate

My Iphone was hacked and I now cannot access icloud, I cant reset my phone as I need the icloud password but this has been changed by the hacker along with my security questions

My email was hacked and I now cannot access icloud using my Iphone 5. The hacker changed my password as well as my security questions, how can I reset my phone without the icloud password

Click here and contact Apple.
(119196)

ORA-12705: Cannot access NLS data files or invalid environment specified

Hi,
I am using Oracle 10g Express, ojdbc14.jar , apache tomcat 5 server on Linux (Fedora 6).
In CustDisp.JSP I have following code:
<%
try {
Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance();
out.println("JDBC driver loaded. ");
catch (ClassNotFoundException e) {
%>
error : 
<%=e.toString() %>
<%
String sql = "SELECT custid, fname, lname FROM customers";
try {
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","myid", "mypassword");
out.println("Connection made. ");
Statement s = con.createStatement();
ResultSet rs = s.executeQuery(sql);
%>
When Itry to access http://localhost:8080/jsps/CustDisp.jsp,I get following error:
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified.
When I display enviorenment parameters in this JSP, I get follwing:
JDBC driver loaded.
Oracle Home = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
Language = en_US.UTF8
NLS Language = AMERICAN_AMERICA.AL32UTF8
Path = /usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
Class Path = /usr/lib/jvm/java/lib/tools.jar:/usr/share/tomcat5/bin/bootstrap.jar:/usr/share/tomcat5/bin/commons-logging-api.jar:/usr/share/java/mx4j/mx4j-impl.jar:/usr/share/java/mx4j/mx4j-jmx.jar
Charset = null
Home = /usr/share/tomcat5
Log Name = tomcat
LD LIB PATH = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data/ojdbc14.jar:
Locale = en_US
nls data directory : /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data
I have checked permissions for nls data folder, they are :
Owner: Oracle
Folder Access: Create and delete files
Group: Dba
Folder Access: Access files
Others
Folder Access: Access files
Execute: Allow executing file as program.
I have written a java program and used same drivers,customers table and connection i.e
Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance();
String sql = "SELECT custid, fname, lname FROM customers";
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","myid", "mypassword");
it works fine and displays customers.
Only when I try to access my CustDisp.JSP, I get
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified. Error.
Can some one please help me sorting out this problem?
Thanks in advance.
AQK

Hi,
Relevant code for CustDisp.JSP is given below:
<%@ page session="false" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="oracle.jdbc.*" %>
<%
try {
Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance();
out.println("JDBC driver loaded. ");
catch (ClassNotFoundException e) {
%>
error :
<%=e.toString() %>
<%
String sql = "SELECT custid, fname, lname FROM customers";
try {
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","myid", "mypassword");
out.println("Connection made. ");
Statement s = con.createStatement();
ResultSet rs = s.executeQuery(sql);
%>
Permissions for nls data folder
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data/
are :
Owner: Oracle
Folder Access: Create and delete files
Group: tomcat
Folder Access: Access files
Others
Folder Access: Access files
Execute: Allow executing file as program.
In CustDisp.JSP I have following code which accesses ojdbc14.jar
// Check access to the nls data files.
cfile = "";
try{
File myfile = new File("/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data/ojdbc14.jar");
if (myfile.exists() == true){
cfile="ojdbc14.jar exists in the data directory. Its length is "+ myfile.length()+" It can be read =" myfile.canRead() " , can be written = " + myfile.canWrite();
}else{
cfile="ojdbc14.jar does not exist.";
catch (Exception er){
%>
error in reading file: 
<%=er.toString() %>
<%
This code gives following output:
File ojdbc14.jar exists in the data directory. Its length is 1536979 It can be read =true , can be written = false
Every things seems to be OK but when I try to access http://localhost:8080/jsps/CustDisp.jsp, Iget:
Sql Error:
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified
Best regards.
AQK

I updated iphone 4s to 7.02 and now cannot access icloud server.

I updated iphone 4s to 7.02 and now cannot access icloud server.

One of these:
Restart:
1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
2. Press and hold the Sleep/Wake button until the Apple logo appears.
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

Installed latest update today, now cannot access F/B app

Hi, installed the latest update today, now cannot access F/B via the App!! Okay online but the App looks like it is loading...blue page etc, then immediately reverts to home screen. Have checked settings and F/B is enabled
Please help x

try closing it by douple tapping the home button to reveal multi-tasking screen. swipe from right to left till you see the fb app. then swipe the app up and off the screen to close.
Tap home button again to return to home screen. Now, open fb app

[exec] ORA-12705: Cannot access NLS data files or invalid environment specified

Hi all,
We have an app running ok on WinXP, But if run on Win7 it gets error:
    [exec] Caused by: java.sql.SQLException: ORA-00604: error occurred at recur
sive SQL level 1
     [exec] ORA-12705: Cannot access NLS data files or invalid environment speci
fied
Is this a sqlnet client issue?
Thanks a lot,
zxy

yxes2013 wrote:
I already google it but I am not confident about my result
I need validation from genius guys like you
And as long as you rely on being spoon-fed everything, you will never be confident about your result.
Try the following:
>change jre versión (donwload from http:www.sun.com) and declare the new JAVA_HOME variable.
>try calling this code: Locale.setDefault(Locale.ENGLISH);
    before you open a database connection.
> The NLS_LANG must be unset in the Windows registry (re-named is best). Look for the NLS_LANG subkey in the registry at \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE, and rename it.
And where did you find that solution?
Lie On The Internet - YouTube

I have a powerbook G4 running OS X 10.5.8. I had a new hard drive installed and now cannot access my itunes. I do I get my itunes that I paid for??

I have a powerbook G4 running OS X 10.5.8. I had a new hard drive installed and now cannot access my itunes. I do I get my itunes that I purchased?

Hi,
Read this. http://support.apple.com/kb/HT2519
Jim

Configuring Apach(ORA-12705: Cannot access NLS data files .. )

Hello,
I receive this error while configure an HTTP Server for Oracle XE Database.
ORA-604 LogOn ORA-00604: error occurred at recursive SQL level 1\nORA-12705: Cannot access NLS data files or invalid environment specified
The database NLS parameters is
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET CL8MSWIN1251
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0
DADs configuration:
<Location /elxe>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlMaxRequestsPerSession 10
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString elxe:1521:XE ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.CL8MSWIN1251
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword xxxx
Allow from all
</Location>
What is wrong?

It is most likely that the NLS files are missing from the server/pc.
Also look at the apachectl file.
Find the following line:
NLS_LANG=${NLS_LANG=""}; export NLS_LANG
Modify this line to look like the following:
NLS_LANG=AMERICAN_AMERICA.CL8MSWIN1251; export NLS_LANG
Christopher Soza
Oracle BI DBA
Orix Consultancy Services Ltd
b: http://sozaman.blogspot.com

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

In many, many apps Apple has now created a confusing array of "save as..", "export", and "duplicate" all doing essentially the same thing - saving a new copy elsewhere possibly with format changes. Drives me nuts.
But its always there.
Grant

I now cannot access my live files in Dreamweaver

Similar Messages

Maybe you are looking for