I`ntel HD Graphics 3000

Hello,
I have a beginning of 2011 mac book with an intel HD Graphics 3000. Since i bought it i had sometimes some black screen for some seconds and some strange restart with also a black screen. Since some days I have this (see the attachment) and i want to know if it's the same problem or if my GPU is the model that was having a lot of issues cause normally they should replace it.
Model : C02FTF4CDF8V
MacBook P
Identifiant d
Thanks

2011 MacBook Pro Repair Extension Program for Video Issues

Similar Messages

Will Sims 3 run on Mac OS X Leopard 10.6 with an Intel HD Graphics 3000 card?

I recently replaced my broken laptop with a Macbook Pro 13" operating on OS X Snow Leopard 10.6.7. I wanted to continue playing the Sims 3 as I had done on my previous laptop. It installed fine onto my Mac and allowed me to create people. When moving them into a household, the game suddenly froze (appearing as if it is on pause) meaning I need to actually switch on and off my Mac to clear the screen.
Could this be because my Mac has an Intel HD Graphics 3000 card? The Mac system requirements for the Sims 3 asks for an ATI X1600, a Nvidia 7300 GT or an Intel Integrated GMA X3100. If so, how do I go about fixing this? Would I need to physically buy a new graphics card to accommodate the game?
I'm not a massive gamer but it appears I am a bit of a Mac dummy!
Please help if you can

Sounds like it. Unfortunately you can't replace the graphics card. Replace the computer*:
http://www.macmaps.com/usedrefurbished.html

Macbook Pro 15-inch, Late 2011. I'm 100% certain that I bought it with the AMD Radeon HD 6770M graphics processor with 1GB of GDDR5. It says that I have HD Graphics 3000 384 MB. WHY?

I don't understand why my MacBook Pro 15-inch, Late 2011 version is reporting to me that I only have the Intel HD Graphics 3000 384 MB card in it. Why is this? When I bought it I was given the choice to choose between the 500 mb or 1 GB video card and I chose to pay extra in order to get the 1 GB, but now it says that I don't even have that( I can't find it anywhere). I never realized this until now. I was just looking at my specs again to make sure if my Macbook Pro was ready for the upcoming Mountain Lion OS. Please help me understand why this is happening. I'm 100% certain I bought the 1GB video Card and that my mac is supposed to have a quad core processor. I also ordered with the highest resolution screen available at that time which was something like an extra $100. I made sure that I had these extras because I wanted a mac that was going to perform great and not skip a beat. I have noticed it's been skipping here and there and I have been surpirsed at how slow it can get sometimes. I only have 4 GB ram at the moment, but I know that I can upgrade to 16 GB if I need to and have been contemplating on whether i should or not. I also like to do some gaming when I have the extra time and I've noticed that sometimes it has a hard time with some games. I bought this mac around January of this year. Is it possible that there was just a mess up in the shipping on the extras I had added? Thank you for your help.

You are looking here?

Which is better for gaming intel hd graphics 3000 or nvidia geforce

i want to sue steam and i sonder which is better for gaming :Intel HD Graphics 3000 384 MB graphics or nvidia geforce . If you know a better graphics card please let me know thanx.

sorry i had lots of typos

Cant find driver for graphics AMD Radeon 6600M and 6700M series / Intel(R) Graphics 3000

my graphic drivers doesnt work so my screen in stretched and wide then the usual. My hp assitant recommades the following two graphics drivers
AMD Radeon 6600M and 6700M series
version: 14.501.1003.0
Intel(R) Graphics 3000
version: 9.17.10.2932
cant any one help me reconfiguer my screen
HP Envy 14

Hi:
What is the full model number of your Envy 14 notebook and what operating system are you running on it?

[SOLVED] StarCraft 2 flickering w/ mesa / intel HD graphics 3000

I'm using mesa 8.0.4 and Intel HD Graphics 3000, wine 32-bit and -opengl and force_s3tc_enable=true
It flickers on ground in lighter colors and over the screen in triangles, also sometimes green color is over the screen, it depends on the map and the colors of the map.
I will try to take a video.
UPDATE: http://www.youtube.com/watch?v=tsaEd-dTAlQ <-- this is one of the artifacts/flickering, it looks very much like this. I can get the same SCV flickers in campaign !
I've never experienced this before, I am not sure if it's caused by an update by mesa or StarCraft 2.
Mesa/Intel HD 3000 however runs StarCraft 2 fine, but this problem really has ruined my game within a short period of time, I feel really epileptic !
Last edited by dezza (2012-10-12 08:34:26)

I think I found a fix, haven't tested thoroughly yet though ... Since I reinstalled StarCraft 2 and deleted my .wine directory, the registry keys for graphics tweaking was also gone.
I re-created:
[HKEY_CURRENT_USER\Software\Wine\Direct3D]
"DirectDrawRenderer"="opengl"
"Multisampling"="disabled"
"OffscreenRenderingMode"="fbo"
"PixelShaderMode"="enabled"
"RenderTargetLockMode"="readtex"
"StrictDrawOrdering"="disabled"
"UseGLSL"="disabled"
As told here:
http://wiki.winehq.org/UsefulRegistryKeys
NOTE: UseGLSL is special and is only needed for video cards like mine (Intel HD Graphics 3000) that forces s3tc like explained here: https://wiki.archlinux.org/index.php/St … r_Problems
And it seems to work ...
I think I have to remove VideoMemory all together, because my StarCraft 2 has crashed 2 times now complaining about low video memory - so it's better with an OpenGL auto-detection of vram or if the problem persists a much larger value.
Last edited by dezza (2012-10-12 08:30:18)

OPENGL disabled with Intel HD Graphics 3000 384 MB

Macbook Air with Intel HD Graphics 3000 384 MB. When attempting to open 3D file Photoshop cc14.2.1 receive error message "Could not complete your request because 3D functionality is currently disabled due to OpenGL being disabled." Cannot enable OPENGL in preferences. What to do besides buy new Mac with different graphics card?

Hi p,
If you mean software, go to the Apple menu and select Software Update.
If you mean the actual hardware GPU, that is soldered onto the logic board and is not upgradeable.

Increasing shared VRAM on Intel HD Graphics 3000

Hello,
Question about MacBook Pro (13-inch, Early 2011) with Intel HD Graphics 3000. I upgraded RAM with 16GB, and wonder if it is possible to allocate more then 512 MB of system memory for shared VRAM. Now system profiler shows 512 MB shared VRAM, the same like it was with 8 GB RAM before the RAM upgrade.
"About integrated video on Intel-based Macs" topic (http://support.apple.com/kb/HT3246) mentions MBPs with 8 GB of RAM only.
Thanks!

HI M,
On a Windows machine, you can go into the BIOS and change RAM allocation.
I have found nothing to suggest the same is true on a Mac. It appears it is controlled in ROM, and unless Apple makes a firemware upgrade, it is what it its. Which begs the question, what is it?
Given that the article you cite states the VRAM allocation goes from 256MB to 512MB by increasing RAM from 4GB to 8GB in one example, it would seem that amount might go up to 1GB VRAM with 16GB of RAM. As you're probably aware, Apple bases everything on RAM available at time of production of the Mac, and never goes back to change specs as RAM density increases, so it may also be "locked in" at 512MB for 8GB.
Bottome line: It's possible the base VRAM available may indeed go up as needed on your Mac, but that's far from certain. There is information out there on the internet suggesting this "as needed" theory, so you may want to do further searching reading and see if you can find that needle in a haystack.

HT203254 Macbook pro 15. Intel HD Graphics 3000/ AMD Radeon HD 6490M. Screen seems 'solarized'/pixellated at startup. disappears after 30 minutes. Any idea of cause and cure?

New Machine in Mar 2011. OS version 10.6.8
All software updates installed via Automatic update.
Screen has a 'solarized' look on start up, which disappears after about 30 mins, suggesting a 'warm up' issue?
Am aware of Nvidia issues with Macbook pro but this machine has the following graphics/display on logic board.
Does anyone have a view on this matter and a way of resolving it? Still under extended warranty.
Chipset Model:          AMD Radeon HD 6490M
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x8
VRAM (Total):          256 MB
Vendor:          ATI (0x1002)
Device ID:          0x6760
Revision ID:          0x0000
ROM Revision:          113-C0170H-521
gMux Version:          1.9.23
EFI Driver Version:          01.00.521
Displays:
Color LCD:
Resolution:          1680 x 1050
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Intel HD Graphics 3000:
Chipset Model:          Intel HD Graphics 3000
Type:          GPU
Bus:          Built-In
VRAM (Total):          384 MB
Vendor:          Intel (0x8086)
Device ID:          0x0116
Revision ID:          0x0009
gMux Version:          1.9.23

You said the magic words: Still under extended warranty. Take it in for evaluation and repair. That is not a normal situation. The display should not have to 'warm up'.
Ciao.

I have my macbook pro 17" 2.5 Q.C. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb.

i have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody out there have the same problem please how can i know or is there any other way to be sure what's the real capacity of my graphics?take note this is brand new late 2011 model made to customize MD311 with anti glare screen...

I have the same machine, except it's running the blessed fast Snow Kitty,
"when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
What specs are you refering about?
Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

Intel HD Graphics 3000 backlight [PartlySolved]

Hi!
I've got HP Pavilion g6 laptop with Intel HD Graphics 3000 on Core i5. And it works correctly, except for backlight.
# echo 5 > /sys/class/backlight/acpi_video0/brightness
Gives no effect, thow /sys/class/backlight/acpi_video0/brightness is 5 now;
Besides acpi_video0 there is acpi_video1 and acpi_video2. I didn't succeed to do the same with them.
acpi_osi=Linux and acpi_backlight=vendor
as kernel parametrs didn't help me.
Moreover
#setpci -s 00:02.0 F4.B=05
didn't have an effect.
Im going to build a custom kernel now. Plese tell me, what moudules are need to be compiled in, and how do i need to use them.
Also on mu laptop i have Radeon HD 6470M.
#modprobe radeon
#echo DIS > /sys/kernel/debug/vgaswitcheroo/switch
Takes an effect, that system losts control over screen.
Help please.
PS Sorry of my poor english.
PPS I've chosen Laptop Issues topic, and i'm not shure, I was right.
Last edited by Dronte (2011-09-18 08:40:36)

I've looked through the xf86-video-intel and found a function there
static void
intel_output_backlight_set(xf86OutputPtr output, int level)
struct intel_output *intel_output = output->driver_private;
char path[BACKLIGHT_PATH_LEN], val[BACKLIGHT_VALUE_LEN];
int fd, len, ret;
if (level > intel_output->backlight_max)
level = intel_output->backlight_max;
if (! intel_output->backlight_iface || level < 0)
return;
len = snprintf(val, BACKLIGHT_VALUE_LEN, "%d\n", level);
sprintf(path, "%s/%s/brightness",
BACKLIGHT_CLASS, intel_output->backlight_iface);
fd = open(path, O_RDWR);
if (fd == -1) {
xf86DrvMsg(output->scrn->scrnIndex, X_ERROR, "failed to open %s for backlight "
"control: %s\n", path, strerror(errno));
return;
ret = write(fd, val, len);
if (ret == -1) {
xf86DrvMsg(output->scrn->scrnIndex, X_ERROR, "write to %s for backlight "
"control failed: %s\n", path, strerror(errno));
close(fd);
I didn't find, where this function sets the backlight. It only prints the information.
Last edited by Dronte (2011-09-12 21:01:03)

Impossible de mettre à jour mon Mac Book Air avec Mavericks. Pourquoi ? MacBook Air 13 ", mi-2011 Proc 1.7 GHz Intel Core i5 Mem 4 Go 1333 MHz DDR3 Graph Intel HD Graphics 3000 384 MB N° C02GDCBADJWT Logiciel Mac OS X 10.7.5

Impossible de mettre à jour mon Mac Book Air avec Mavericks. Pourquoi ? MacBook Air 13 ", mi-2011 Proc 1.7 GHz Intel Core i5 Mem 4 Go 1333 MHz DDR3 Graph Intel HD Graphics 3000 384 MB N° C02GDCBADJWT Logiciel Mac OS X 10.7.5

UPDATING post above.
Excel slowing down is particularly when I do "copy" or "paste" (up to 3 seconds before the action is taken into account).
I tried with empty or very small files, problem is the same.
I checked autoupdates of Microsoft, everything is up to date.
I made the test of David Linc, with no issue.
Anyone having same situation or solution ?
Thank you
F.

The Adobe After Effects CC supports Intel (R) HD Graphics 3000 video card?

The Adobe After Effects CC supports Intel (R) HD Graphics 3000 video card?

Read this in detail:
GPU (CUDA, OpenGL) features in After Effects CS6 and After Effects CC

Preobelm with intel (R) hd graphics 3000

hi guys how are you ?
I have hp pavilion g6 1066se with windows 7 64bit home premuim
when iam trying to install the intel graphics but the system returned the following error:"This computer does not meet the minimum requirements for installing the software"
my graphic is intel (R) hd graphics 3000
need your help
plllllllllllllllllllllease

Hi Alqosh,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1066se Notebook and not able to install the HD graphics. Here is a link to the drivers for your system's Intel graphics.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have Macbook Pro with Intel HD Graphics 3000 but can't see airplay anywhere?? Help

I have a Macbook Pro 13" full spec, bought in March 2012 uk and it has the Intel HD Graphics 3000...however i CANNOT FIND AIRPLAY anywhere!! Am i missing something?
When I go to display there is no drop down menu for apple tv etc...it's driving me crazy!
I believe my graphics card is compatible and the osx is mountain lion [i presume as it's 10.7.4] so do I need to download it or buy it or is airplay hidden somewhere?
Thanks

Ah ok, someone told me it was mountian lion...well that explains that. So if I get mountain lion for my macbook...as it has the Intel then it should have airplay?
Also...if i get mountain Lion and install it will it delete any of my files? like will it completely start the computer again like a reset or will it keep all my files etc? I use final cut pro and have a lot of files that it talks to etc and don't want to loose all this.
Thanks

I`ntel HD Graphics 3000

Similar Messages

Maybe you are looking for