I/O ERROR RESULT -36

Can anyone tell how to fix an error? I am using a simple drive 250GB hard drive to do my recording in logic express 8. LE 8 seems to allow me to record midi data, but won't allow me to record audio data. Each time I hit record in audio mode, the program freezes and an i/o error result -36 error pops up. Can someone give me a step by step way to resolve this in "LAYMENS" terms? Consider me a baby when it comes to understanding computer and its many technical terms.
NOTE: I also have my BCF 2000 control surface connected to my macbook osx, but I don't think this should have anything to do with it.

Technically, if your CPU meter is running high it's because your processor (CPU) is not up to the job of running all the plug-ins / Software Instruments / etc. that you're using. Make sure you disable any you're not actually using, select an Audio Track when playing back (doesn't have to have anything on it!), & Freeze or Bounce any Tracks that you can. These (and other) tricks will minimise the drain on the processor.
RAM is the other big issue. All this stuff needs lots of RAM. If you don't have the maximum you can get for your Mac, try to get as close as you can…

Similar Messages

"Error Result code = -43" AND "Audio file not found"

In Garageband I was trying to click Join, but kept getting "Error Result code = -43"
What does this mean?
Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

mcgregorsgal wrote:
so do I have to basically start over?
for that one recording, it looks like it.
the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

Issue installing SQL Server 2012(with SP1) on windows 7 Error result: -2067529718

When running the installation, it suddenly stops without any error popup.
I ran the installation from the command prompt and this is what I get:
An error occurred during the SQL Server 2012 Setup operation.
Error result: -2067529718
Result facility code: 1220
Result error code: 10
I recently uninstalled SQL Server 2012 SP1, because the SQL server service was not starting up, it would just hang in there with no response. I tried many things to get that issue fixed, finally I decided to uninstall and start fresh but I couldn't since
I was getting an error stating that I needed Windows 7 SP1(which was already installed). I downloaded the
microsoft fix it tool which fixed the issue.
On the control panel/Programs and features, I still see that SQL Server 2012 is listed if I click to uninstall again it tells me:
An error occurred while trying to uninstall Microsoft SQL Server 2012. it may have already been uninstalled. do you want to remove Microsoft SQL Server 2012 from the Programs and features list?
if I click yes, eventually it will be listed again.
currently I'm not able to install SQL server again and besides the info provided there are not error messages (I also copied the installation files to disk).
UPDATE: it appears that the sql server was not completely removed from the system, I still see listed the SQL server(SQLExpress) and server browser services on the SQL server configuration manager.
Thanks.

1) First Reboot your server and try again for the installation.
2) If first fail again than Take a backup of Registry first for safe side and then delete the entries of SQL server 2012 if found take a reboot again and try to install again.
One more thing if installation created any file then move/Delete that also before installation.

Error: Result of agent resolution does not agree with agents of task

Hi,
I'm getting the error "Result of Agent Resolution does not agree with agent of Task". I'm passing the agents in Expression which I'm getting from Method in my previous step and passing to workflow container and it is getting passed to Expression. The userid is present in that container. And the Task is assigned as General Task but still I dont know what might be the problem. The ID is with 'US' prefix. Even if I give the userid directly in the Task, it shows the same error.
Regards,
JMB

Hi
Incase you are using different clients for development and testing, make sure in testing client, task is assigned as general task.
You may check the way the userid is passed. Please note that the US is object type and Object ID(user id) is different. Both of them should not be part of one string. So while you test, just pass the user id without a prefix US. Hope it will work for u.
Regards
Waz

Mac OS Error Result Code 1634955892

The subject error message is what I got when I tried to copy a DVD that would not play all the way using Toast, to se if I could recover. It says after exttracting the DVD and putting in the media that it cannot record because of a Mac OS error result code 1634955892. What the !!!???>> does this mean?

I found this reference to that error code, but it seems complicated to me: http://support.apple.com/kb/TA26910?viewlocale=en_US
So, I did more searching and found this:
http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2006-07/msg00364.html which is a sort-of explanation with no fix.
And this: http://www.tivoblog.com/archives/2007/11/18/roxio-releases-updated-version-of-to ast-popcorn-now-supports-tivo-92-leopard/
which seems to imply that Toast/Popcorn need to be updated for DVD copying.
Apparently this error code comes up when there are compatibility issues.
Have you tried extracting the DVD data using other software such as Handbrake, Ripit or MPEG Streamclip?

Mac OS Error Result Code 12082

Can anyone at all shed some light on this? Recently have been getting an error message when burning DVDs that says "Could not record the disk because of a Mac OS Error: Result Code 12082". OS is 10.3.9, error occurs on a 20" G5 iMac.
After searching through all the error code listings I can find none that have any info on that one, so would like to throw it out there for assistance.
Thanks
20" G5 iMac Mac OS X (10.3.9)

Hello Precise,
I found this on Roxio's support:
Mac Os X Error 18775
sorry if that is not related to your problem,
littleshoulders

I/O error result code= -36 ???? Please help!!

Im running studio with apogee duet, just got the apple care (god bless it) superdrive replacement, now I get audio input output functioning realtime, but *** soon as I attempt to record the error pops up. I cant find anyone else with this problem, and apogee unfortunately was clueless. I find it strange that an I/O error is occurring when I pass audio in/out no problem. It blasts the error as soon as I press that quick key R.
I'm running ProTools8 in the meantime on a MBox and it feels so inadequate/fake/unprofessional/. Show me why it was a good thing apple bought out E-Magic fellas!!!
P.S. where do you guy get the definitions of these codes?

I have never experienced that error, but I Googled "I/O Error: Result Code=-36" and found this...
It really has nothing to do with Logic. It is a Mac OSX error being passed on
by Logic. It has to do with not being able to write to the drive. You can
get this error in Logic if your recording drive is too full, is too
fragmented, or the directory is messed up.
Some things you can do to solve the problem are: Make sure you are recording
to a drive other then the system drive, make sure you have plenty of free
space on the recording drive, repair permissions, defrag the recording
drive, or run a disk utility like Disk Warrior to check and repair directory
issues.
Hans
here is the link to that ...
http://logic-users.org/forums/LUG/thread/81375

Mac OS error Result Code = 1852402768

I have been using Handbrake to covert video files into apple TV format for a number of years & then every now & again burning the file to DVD which has worked fine.
I don't know if this is just a coincidence but I downloaded a Handbrake update last night & then tried burning the newly converted files and using Toast Titanium but i received the following error "Mac OS error' Result Code = 1852402768"
I've searched the forums and many suggest that the files could be too large for the DVD but there is a display on Toast that shows the size of the files & I can usually get 3 half hour episodes on no problem with free space remaining but to test this theory I dropped in just one file of less than a GB and the same error came up.
I did however try burning some older files pre the handbrake update & they have worked fine.
I don't know if I have to change any setting but currently I'm stuck, Any help out there??
Many thanks
JPGUK

You might try looking/posting here.
Handbrake Support

I/O Error result code -36: Logic bug, or Mac OSX bug?

Hello-
I encountered a problem in Logic Pro 8 today that severely damaged one of my audio files in my session. I was working in the sample editor, and I went to copy and paste an audio fragment. When I tried to paste the audio, this error came up:
"I/O Error, result code = -36"
After that, the cursor turned into a black and white spinner, and the audio file that I was working with suddenly was altered in a way that somehow erased a portion of it in the song. I had to ability to undo, view the changes in the audio file, etc, etc. It was damaged irreversibly, and I had to end up re-recording that segment. Does anyone know why this happens, and is it a bug in Logic?
BTW, I have over 500 gigs free on the external drive that I am recording to, and nothing has changed, hardware-wise on my system in over 6 months... Any help would be greatly appreciated.

Adam Nitti wrote:
Hello-
I encountered a problem in Logic Pro 8 today that severely damaged one of my audio files in my session. I was working in the sample editor, and I went to copy and paste an audio fragment. When I tried to paste the audio, this error came up:
"I/O Error, result code = -36"
After that, the cursor turned into a black and white spinner, and the audio file that I was working with suddenly was altered in a way that somehow erased a portion of it in the song. I had to ability to undo, view the changes in the audio file, etc, etc. It was damaged irreversibly, and I had to end up re-recording that segment. Does anyone know why this happens, and is it a bug in Logic?
BTW, I have over 500 gigs free on the external drive that I am recording to, and nothing has changed, hardware-wise on my system in over 6 months... Any help would be greatly appreciated.
This sounds like one of two things that I have seen with this error :
1.- your external hard drives' connection to the computer is not 100% stable (loose cable...dusty environment...)
2.- Your audio device, is ti FireWire too? Is it daisy chained to this external hard drive? Maybe the order of the daisy chaining needs to be looked at.
Cheers

I/O Error Result Code -36

I'm trying to record a new track in an existing project, and every time a hit the record button I get an I/O Error Result Code -36. This is only happening in this particular project. If I open a new project I can record just fine. What does this mean? Any help would be greatly appreciated!

wmclow wrote:
I'm trying to record a new track in an existing project, and every time a hit the record button I get an I/O Error Result Code -36. This is only happening in this particular project. If I open a new project I can record just fine. What does this mean? Any help would be greatly appreciated!
And what audio interface and hard drive are you using?
Details... it's all in the details...

I/O Error: Result Code=-36 HELP!!!

Anyone got any idea what this is about? The problem in a nutshell is as follows...
I'm running Logic 7.2.3 on a G5 (PowerPC version) with a dedicated, built in 250gig HD for audio. Over the last week I've suddenly become aware that everything I thought was being saved to this HD is impossible to access anymore and I get the above error code coming up each time.
However, anything recorded to this HD prior to the last week still opens fine with no issues at all.
Tell me I'm being stupid and have done something ridiculous, please!!! There's a whole lot of work down the drain if that's not the case.
Any help you can offer would be greatly appreciated.
Thanks.

I have never experienced that error, but I Googled "I/O Error: Result Code=-36" and found this...
It really has nothing to do with Logic. It is a Mac OSX error being passed on
by Logic. It has to do with not being able to write to the drive. You can
get this error in Logic if your recording drive is too full, is too
fragmented, or the directory is messed up.
Some things you can do to solve the problem are: Make sure you are recording
to a drive other then the system drive, make sure you have plenty of free
space on the recording drive, repair permissions, defrag the recording
drive, or run a disk utility like Disk Warrior to check and repair directory
issues.
Hans
here is the link to that ...
http://logic-users.org/forums/LUG/thread/81375

Error Result Code -48? Help...won't record!

I use G-band for basic VO recording in my home studio into my Powerbook. I run a simple stereo line-in and record to a completely basic stereo track. Nothing fancy. This has worked flawlessly for months.
Just now, in mid-session, I click on the red Record button and I get this message: Error Result Code -48. It doesn't begin to record at all. The message is immediate, and it won't record.
This program is pretty vital to my business. Can anyone help me figure this out?? I have restarted the program, shutdown and restarted the Powerbook. No luck.
Any help?!
ge

You could try some web searches. I just know some of them because I've run into them while programming, and have some notes scattered about here and there for some of the less common ones, but not all of them.

I/o Error Result -36 in Logic 7.2.3

Hi Guys - Forum newbie here and need a bit of help please
Working on a logic song that needs to be handed in for coursework but have the following error while trying to save the song and even bounce.
i/o Error result -36
The funny thing is that it does save. The ball spins for about 30 seconds then error pops up on screen. It however doesnt bounce and that will stop me from handing in the work
It is only with this song as i have opened a new song and saves/bounces no problem
I have updated firmware for M-Audio device, trashed logic preferences and all other elements suggested that I have found on forums but no luck. The i/o error -35 for symbols that should be not used does not apply here as I only have a single letter as my song name
Any help will be appreciated
kind regards
Qiuinton
G5 PowerPC Mac OS X (10.4.8) Logic 7.2.3, M-Audio 410 Audio interface
G5 PowerPC Mac OS X (10.4.8) Logic 7.2.3, M-Audio 410 Audio interface

My lacie external harddrive had an issue with a specific file
omg.. a problem with a lacie drive?? I'm in shock..
Question, should there not maybe be a folder in the main forum page when
we can list the different general error's like -36 and inside of that let forums > members insert the different solutions as they happen. This way the member > can go staight there first. Just a thought
good idea. or if not at the forum, there could at least be a link or downloadable pdf or whatever at the logic support site that covers all of the error messages with accurate and useful descriptions of them all, and a list of possible real-life causes and fixes. that would save a lot of time wasted at this forum trying to get to the bottom of this stuff. I haven't looked at the logic support page for a while, maybe something like that is already there... wishful thinking..

I try to drag certain loops but when i drop them in i get the error:   Result code = -5000     File = GarageBand-Temp-B262E454.tmp

I try to drag certain loops but when i drop them in i get the error:
     Result code = -5000
     File = GarageBand-Temp-B262E454.tmp

Hi,
   I've been trying to solve this problem for a school my companey has set up. After some research and looking at a number of similar posts I tracked the problem down to loops that came with jam packs or with apps like soundtrack pro. These loops are located in /Library/audio/appleloops. If you give everyone read and write access to this folder and it items the loops seem to work.
I also noticed that once the loops were working agin GB had to convert the sample rate so it's possible that it's the sample rate on certain loops that causess the issue or prehaps the need to change the rate.
Hope this helps.
Matt Fleming
(ACSA)

Win2008 64Bit Collection Error "Result has Repeating Key Value" On Host Per

Win2008 64Bit Collection Error "Result has Repeating Key Value" On Host Performance Tab [ID 864908.1]
     Modified 29-JUL-2009 Type PROBLEM Status MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Enterprise Manager Grid Control - Version: 10.2.0.5
Microsoft Windows Server 2008 x64 (AMD64/EM64T)
Symptoms
OMS: 10.2.0.5
Target Agent: 10.2.0.5 Windows 2008 Standard Edition Service Pack 1 64-bit
Happens for all Windows 2008 64-bit hosts with SAN drives using multipathing.
When accessing the Host > Performance tab on Windows 2008 64-bit host, get a Metric Collection Error:
Exception: oracle.sysman.emSDK.emd.comm.MetricGetException: Result has repeating key value on
drive 0: for diskactivity metric
emagent.trc shows:
2009-06-19 11:19:06,125 Thread-6736 ERROR engine:
[host, <hostname>,Load] : nmeegd_GetMetricData failed : Result has repeating key value : 0 C: U: C: U:
Collection Error:
Error getting data for target <hostname>. Exception:
oracle.sysman.emSDK.emd.comm.MetricGetException: Result has repeating key value : 0 C: U: C: U:
Switching to the last 24 hrs view.
Cause
Microsoft issue with Windows 2008 64-bit and SAN multipath.
Bug 8214155: ERROR RESULT HAS REPEATING KEY VALUE: <DISK DRIVES> ON DBCONSOLE
Solution
Contact Microsoft Support to fix the issue in Performance Monitor's PhysicalDisk object counter since "nmupm diskactivity" gets the information from the PhysicalDisk object counter.
References:
http://technet.microsoft.com/en-us/library/cc768048.aspx
http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/prork/pree_exa_swlz.mspx?mfr=true
References
BUG:8214155 - ERROR RESULT HAS REPEATING KEY VALUE: ON DBCONSOLE
This bug I found on Metalink but no workaround available. I've got the same problem everytime I view performance tab on Microsoft Windows 2008 x64. Does anyone know how to solve it?

from the emoms.log
2009-12-08 14:25:09,171 [EMUI_14_25_05_/console/monitoring/hostSummary$pageType=current$ctxType=Hosts$selTab=1$target=CITIZEN02$type=host] ERROR host.HostSummaryDataObject getHostSummary.1215 - Result has repeating key value : 0 C: D: C: D:
oracle.sysman.emSDK.emd.comm.MetricGetException: Result has repeating key value : 0 C: D: C: D:
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
     at java.lang.Class.newInstance0(Class.java:308)
     at java.lang.Class.newInstance(Class.java:261)
     at oracle.sysman.emSDK.xml.DelegatingHandler.getObjForTag(DelegatingHandler.java:121)
     at oracle.sysman.emSDK.xml.DelegatingHandler.startElement(DelegatingHandler.java:170)
     at org.xml.sax.helpers.ParserAdapter.startElement(ParserAdapter.java:597)
     at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:180)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1227)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:195)
     at org.xml.sax.helpers.ParserAdapter.parse(ParserAdapter.java:431)
     at oracle.sysman.emSDK.xml.DelegatingHandler.parseObj(DelegatingHandler.java:296)
     at oracle.sysman.emSDK.emd.comm.EMDClient.parseStreamResponseContents(EMDClient.java:2883)
     at oracle.sysman.emSDK.emd.comm.EMDClient.parseResponseStream(EMDClient.java:2805)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:2516)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:2450)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:2367)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:2352)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:1120)
     at oracle.sysman.eml.mntr.host.HostSummaryDataObject.getHostSummary(HostSummaryDataObject.java:813)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
     at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:368)
     at oracle.sysman.eml.app.Console.doGet(Console.java:304)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:265)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:369)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:670)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at

I/O ERROR RESULT -36

Similar Messages

Maybe you are looking for