"I/O Error when Saving Document"; "PreflightLib.dll file missing or corrupt"

These error messages are received when trying to Save the document. The document has Typewriter entries and added/replaced pages. I have done this action almost every day for the past year without any problems. Now it occurs on 2 different computers. I have cleaned my registry and searched to see if I deleted or moved the ".dll" file - no luck. What to do? Work depends on the Acrobat program. Please Help.

Hi dhults,
Please follow these steps to manually re-register PreflightLib.dll file through command prompt:
Click the Start button.
Type "command" in the search box... DO NOT hit ENTER yet!
While holding CTRL-Shift on your keyboard, hit ENTER.
You will be prompted with a permission dialog box.
Click Yes.
Type the following command: regsvr32 /u PreflightLib.dll.
Hit ENTER. This will UN-REGISTER your file.
Type the following command: regsvr32 /i PreflightLib.dll.
Hit ENTER. This will RE-REGISTER your file.
Close the command prompt window.
Re-start the program associated with PreflightLib.dll error.
If still an error occurs, then you may need to repair Acrobat. For that, go to Help menu and click 'Repair Acrobat Installation'.
I hope this will help you.
Regards,
Anubha

Similar Messages

Error when saving an Outlook attachment eg. Word Doc after opening it.

we made the group policy change which was giving an error when saving from opened attached files.
But for 1 particular RDS user the error still seems to be occurring. i've tried the following,
1. recreating outlook.
2. recreating user profile.
3. deleted the group policy history from the registry.
4. tried removing outlook add-ins.
your help would be really appreciated.
kind regards

Hi,
What is the error? Does outlook crash? Would you please also detail the group policy change?
We can try cleaning out the Temporary Outlook Files folder to check the result.
We can refer to the following link for the detailed steps to locate and find the temp folder:
http://www.howto-outlook.com/faq/securetemp.htm
Then we need to use OutlookTempCleaner to clean the folder:
http://www.howto-outlook.com/products/outlooktempcleaner.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Melon Chen
TechNet Community Support

Invalid image error when saving to pdf

I keep getting an invalid image error when saving a MS Publisher file as a pdf. Can anyone help with solving this issue?

You need to provide system and version info and explain how you actualyl produce the PDF. Unless you use the Acrobat PDF printer, I don't see how Adobe software would be involved in any of this, as recent versions of MS Office products can save PDFs natively...
Mylenium

Saving documents with similar file names

When saving documents with similar file names, I used to be able to hit save as button and go to the file folder I wish to use. I could then click an existing file in the folder to draw in the name and then just modify it slightly to create the new name.
In Reader DC I get an error saying this is a read only file an can not be saved. I can save the file if I use a different file name but then I have to go in and rename the file. i.e. if I have a weakly report that I save, I may have the file name "Installerspayroll.we.04.25.15.pdf."
I used to be able to click on the existing file name to bring it into the name box and then just change the date. The updated version is not allowing me to do that, creating more work.

I thought you were referring to an admin account within the Adobe program. I am an admin on the machine I am signed into and using while having these problems
Thank you for this opportunity to share our expertise,
Michael Mallary
Treasurer
Mallary Carpet & Flooring, Inc.
410-766-6992
www.mallarycarpet.com<http://www.mallarycarpet.com>
Earning your unsolicited referrals
is our number one priority

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Font licensing error when Saving?

I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.

You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

Permission error when saving as pdf

I am using 10.6.7 on a Mini and I get a error when saving a documetn as a PDF. It says I don't have permission to save the file.

Hi Arnis,
I have also posted this separately.
Following is the ditamap i am using to create the PDF. This has booktitle, front matter, toc, chapter and backmatter. I am able to generate a PDF (complete with title page, toc, chapter, backmatter, index) using fop 0.25. However, when I try to create a pdf in FM 9.0, I get only the chapter. How can get the others through FM 9.0. Please provide a solution.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE bookmap PUBLIC "-//OASIS//DTD DITA BookMap//EN" "bookmap.dtd" [

<?Fm Validation Off?>

]>
<?Fm Condition DITA-Topicref Blue NO_OVERRIDE show?>
<?Fm Condition FM8_SYSTEM_HIDEELEMENT AsIs NO_OVERRIDE hide?>
<?Fm Condition FM8_TRACK_CHANGES_ADDED Forest%20Green SINGLE_UNDERLINE show?>
<?Fm Condition FM8_TRACK_CHANGES_DELETED Red STRIKETHROUGH show?>
<?Fm BoolCondExpr "" State 0?>
<?Fm TrackChange Off PreviewState PREVIEW_OFF_TRACK_CHANGE?>
<bookmap
    xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
<booktitle><mainbooktitle>Management</mainbooktitle>
<booktitlealt>Version 4.0</booktitlealt>
<booktitlealt></booktitlealt></booktitle>
<frontmatter><notices></notices>
<booklists><toc navtitle = "Contents"/></booklists>
<preface id = "preface">
<topicref navtitle = "Preface" href = "nm\concepts\nm_Preface.xml"
    type = "concept"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></topicref></preface></frontmatter>
<chapter navtitle = "Management" href = "nm.ditamap"
    format = "ditamap" id = "chapter"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></chapter>
<backmatter><booklists><indexlist navtitle = "Index"/></booklists></backmatter></bookmap>

APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM

제품 : FIN_AR
작성날짜 : 2003-04-25
APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM.
==============================================================
PURPOSE
Problem Description
Receipt화면에서 Adjustment를 하고 Save버튼을 누를때,
APP-AR-11526 arp_process_adjustment.insert adjustment exception ORA-20001
위와 같은 에러 발생.
Workaround
select taxable_amount
from RA_CUSTOMER_TRX_LINES_ALL
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
NULL
Update RA_CUSTOMER_TRX_LINES_ALL
set taxable_amount = transaction의 원래 금액
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
Solution Description
RA_CUSTOMER_TRX_LINES_ALL의 taxable_amount값이 NULL인 경우,
invoice 금액 adjustment시 오류가 발생한다.
Reference Documents
-------------------

Pl see if MOS Doc 341469.1 (Adjustment Entry: APP-AR-96027: Tax accounting not defined for the tax code or tax location assigned to this invoice) can help.
HTH
Srini

I was installing an update when I got the error message that the MSVCR80.dll file was missing. It wants me to reload itunes. What do I do?

I was installing an update when I ogt the error message that the MSVCR80.dll file was missing and windows error 126. What do I do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HUH? Error when saving

We are getting a HUH? Error when saving certain files. Once this error shows up, it will save the document, but will a
lways come up when you resave. It only happens on some documents
We are on a network and share files, but everyone is working in CS4

I have been having this issue on one system. I get an "Unexpected Error cannot save file" when trying to save in any format.
This happens when saving across the network or locally.
(CS3 Vista)
We have been living with this problem since the beginning. We simply do not work on this computer in Illustrator for this reason.

With OSX10.7.5 and Adobe Reader 11.0.02 when I try to open a PDF downloaded from the web I get 'There was an error opening this document. This file is damaged and could not be repaired. Preview will not open either. Older PDFs OK.

I am running OS X 10.7.5 and Adobe Reader 11.0.02. In the last few days I have been unable to open PDF's downloaded from the web. Reader gives the error message 'There was an error opening this document. The file is damaged and could not be repaired'. Removing Reader and trying to use Preview to open these files give the error 'Preview cannot open this file. It may be damaged or use a file format that Preview doesn't recognise' (or something like that). Downloading the same files with Reader removed from my Mac Preview opens the files OK.
I was recently prompted to update Adobe software but did not note exactly what the update was nor when it was done.
Reader and Preview will both open PDFs I downloaded a week ago. Reader will also open files downloaded on another Mac running OS X 10.0.0 and copied to my Mac. Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Error when saving

Hello BW Experts,
I am getting this error while saving a query in Bex.
'The query could not saved due to a problem in transport'.
I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
Anyone experienced a similar problem before.
Suggestions appreciated.
Thanks,
BWer

OSS NOTE 194051
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

You need to get a new copy of the PDF.

When saving documents in PDF format a .txt document is also created and saved

When saving documents in PDF format to the my documents folder on a PC a .txt document is also created and saved, does anybody know the where the setting is that allows this functionality (duplicate document in txt format) to be switched off thanks.

When saving documents in PDF format to the my documents folder on a PC a .txt document is also created and saved, does anybody know the where the setting is that allows this functionality (duplicate document in txt format) to be switched off thanks.

"I/O Error when Saving Document"; "PreflightLib.dll file missing or corrupt"

Similar Messages

Maybe you are looking for