I/O error while reading domain directory
I have created a server under admin server. Actually i was trying to integrate weblogic server with obiee.. as i am very new to weblogic i cudn't find the reason for the error.
while i am starting the server which i created i am getting this error
error details i will give below.. Thanks for any help and i will highly appreciate it.
Description: Starting OBIEE server ...
Status: FAILED
Begin Time: 5/12/11 10:14:36 AM IST
End Time: 5/12/11 10:14:37 AM IST
Exception: I/O error while reading domain directory
Thank you.
While starting node manager iam getting this error
SEVERE: Fatal error in node manager server
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:194)
at java.net.ServerSocket.<init>(ServerSocket.java:150)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:84)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unkn
own Source)
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:76)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)
Similar Messages
-
EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.
Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server. The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2 .
Source Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4 calling dbdd_dbtab [dbdynpdb 2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026 Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system. In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
PatThe 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$ Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno 15
sid TEH
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make single threaded, ASCII, 64 bit, optimized
profile /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid 75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c 1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15 <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c 12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15 <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 92
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
pid 75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01] 2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c 1758]
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 96
intno 20020600
make single threaded, ASCII, 64 bit, optimized
pid 75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12 -
Error while reading data through External Table!!!
CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
APLet's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin -
Error while reading ID of own business system from the SLD for system DPI
Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PMHi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv... -
MDS-00521 - error while reading the document in Oracle ADF at Runtime
Hi All,
we are using Jdeveloper Version : Oracle JDeveloper 11g 11.1.1.5.0
we are getting below error message while opening the page at run time.
MDS-00521 : error while reading the document app1/screen1.jsff from metadata repository.
MDS-00569 : unable to read document app1/screen1.jsff from file "D:Oracle/Middleware11115_1/user_projects/domains/j2eeprd1/servers/app1j2eeprd1/.....
WEB-INF/Lib/ADFViewControllerapp1.jar!/app1/screen1.jsff
Note : we disable 1) Enable User Customizations and 2) Enable seeded customization in Project properties -> ADF View
can you please help us to resolve this issue.!
Thanks,This seems issue with MDS schema. You can try two things:
- Restart everything again (database and admin server as well)
- If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
This is what I suspect. Other experts can jump in with better solution.
regards,
GP -
Error while reading access data (URL, user,password) for the Adapter Engine
Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
BalajiIt looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro -
Error while reading access data (URL, user, password) for the Adapter Engin
Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IXPossible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*. -
Error while reading deployment; Deployment problem
Hi,
I have written an ANT script that basically deploys a .war file to a remote
server. both the machines are UNIX based. Iam using wls8.1
My build.xml file looks like this:
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="dev" default="all" basedir=".">
<!-- This is configurations for deploying an application on wls8.1 on win2000
machine -->
<target name="deploy-mailClient">
<wldeploy action="deploy" remote="true" source="../applications/proxymon/proxy.war"
name="
myapp" user="system" password="g00db33r" verbose="true" adminurl="t3://153.2.255.51:8001"
debug="t
rue" targets="TestMon"/>
</target>
</project>
But when iam running this script, iam getting this error:
ant deploy-mailClientBuildfile: build.xml
deploy-mailClient:
[wldeploy] weblogic.Deployer -debug -remote -verbose -noexit -name myapp -source
/export/home/beamon/applications/proxymon/proxy.war -targets TestMon -adminurl
t3://153.2.255.51:8001 -user system -password g00db33r -deploy
[wldeploy] DeploymentData : Delete Files:false
[wldeploy] Timeout :3600000
[wldeploy] Targets:
[wldeploy] Files:
[wldeploy] null
[wldeploy]
[wldeploy] Unpexpected Error Initializing Deployer: weblogic.management.ManagementRuntimeException:
weblogic.management.ApplicationException: [J2EE:160029]I/O error while reading
deployment - java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war.
[wldeploy] java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
[wldeploy] at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:467)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:63)
[wldeploy] at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1499)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1490)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:186)
[wldeploy] at sun.reflect.GeneratedMethodAccessor480.invoke(Unknown Source)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
[wldeploy] at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
[wldeploy] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
[wldeploy] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
[wldeploy]
BUILD SUCCESSFUL
Total time: 9 seconds
Please give some solutions..........this is urgent for me. I really appreciate
your time on this.
-sI believe you need to go into your config.xml and add
ClusterConstraintsEnabled="false" attribute to the Domain element.
ie.
<Domain ClusterConstraintsEnabled="false" ...
Let me know if that doesn't do the trick.
-- Rob
steve wrote:
Thanks Rob. I also wanted to deploy an application to a cluster that would basically
contain 6 managed servers ....and now and as you just said, the Deployment would
fail if any one among these 6 is down......could be please recall and let me know
what is this parameter that i need to set so that even if there is any one/more
servers are down, still the Deployment could be achieved succesfully.
I really appreciate your advises on this .......thanks again.
-steve
Rob Woollen <[email protected]> wrote:
Steve wrote:
i started the server ....and everything went fine.
Question: suppose i have a cluster of 6 managed server, then do i alsoneed to
have all my 6 managed server up and runnning so as to have the Deploymentcompleted
?By default, the deployment fails if any of the targets are not running.
I believe there is an option to force it to deploy even if some
of
the targets are not up, but I don't recall the option. It isn't usually
what you want.
Question: How can i target deploying an application to a cluster usingANT script
as in my build.xml file. i.e i wanted to target to a cluster ratherthan to a
single server.Just say targets="name of your cluster". If you're unsure of your
cluster's name. Search for <Cluster> in your config.xml and you should
find it.
-- Rob
Thanks aton .....steve Gurnett
Rob Woollen <[email protected]> wrote:
That error indicates the Server or cluster TestMon is not currently
running.
-- Rob
Steve wrote:
Hi,
All I wanted to do is to deploy an application called "proxy.war"
from
a machine
called "A" to a machine called "B".
Iam running this ant script on machine "A".
Now as you just suggested.... this is how my build.xml file looks
like:
"build.xml" 13 lines, 468 characters
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="dev" default="all" basedir=".">
<!-- This is configurations for deploying an application on wls8.1on win2000
machine -->
<target name="deploy-mailClient">
<wldeploy action="deploy" source="../applications/ppmon/proxy.war"name="myapp"
user="system" password="g00db3
3r" verbose="true" adminurl="t3://153.2.255.51:8001" upload=true debug="true"
targets="TestMon"/>
</target>
</project>
This is the Exception that iam getting now:
ant deploy-mailClientBuildfile: build.xml
deploy-mailClient:
[wldeploy] weblogic.Deployer -debug -verbose -upload -noexit -namemyapp -source
/export/home/beamon/applications/ppmon/proxy.war -targets TestMon
-adminurl
t3://153.2.255.51:8001
-user system -password g00db33r -deploy
[wldeploy] DeploymentData : Delete Files:false
[wldeploy] Timeout :3600000
[wldeploy] Targets:
[wldeploy] Files:
[wldeploy] null
[wldeploy]
[wldeploy] Initiated Task: [5] [Deployer:149026]Deploy applicationmyapp on TestMon.
[wldeploy] Task 5 failed: [Deployer:149026]Deploy application myappon TestMon.
[wldeploy] Deployment failed on Server TestMon
[wldeploy] dumping Exception stack
[wldeploy] weblogic.management.ManagementException: [Management:149311]Therequest
to deploy "myapp" to server "TestMon" will be deferred till the serverbecomes
active.
[wldeploy] at weblogic.management.deploy.MasterDeployer.failTaskifServerNotUp(MasterDeployer.java:838)
[wldeploy] at weblogic.management.deploy.MasterDeployer.createTask(MasterDeployer.java:747)
[wldeploy] at weblogic.management.deploy.DeploymentTaskRuntime.start(DeploymentTaskRuntime.java:646)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethod)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
[wldeploy] at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
[wldeploy] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
[wldeploy] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
[wldeploy]
[wldeploy]
[wldeploy] Unpexpected Error Initializing Deployer: weblogic.Deployer$DeployerException:
Deployment exit status=1
BUILD SUCCESSFUL
Total time: 12 seconds
any ideas ??????Please Help !
-steve
Rob Woollen <[email protected]> wrote:
I believe remote=true means that the files should be resolved on
the
server rather that on the local client. Basically it gives you away
to
pass a relative path in and have the server use that relative pathon
its file system.
It doesn't sounds like remote=true is what you want. If the
client/server share a filesystem (eg a network filesystem) then you
don't need to specify any options.
If you want the client's copy of proxy.war uploaded to the server,then
set upload=true
-- Rob
Steve wrote:
Hi,
I have written an ANT script that basically deploys a .war file
to
a remote
server. both the machines are UNIX based. Iam using wls8.1
My build.xml file looks like this:
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="dev" default="all" basedir=".">
<!-- This is configurations for deploying an application on wls8.1on win2000
machine -->
<target name="deploy-mailClient">
<wldeploy action="deploy" remote="true" source="../applications/proxymon/proxy.war"
name="
myapp" user="system" password="g00db33r" verbose="true" adminurl="t3://153.2.255.51:8001"
debug="t
rue" targets="TestMon"/>
</target>
</project>
But when iam running this script, iam getting this error:
ant deploy-mailClientBuildfile: build.xml
deploy-mailClient:
[wldeploy] weblogic.Deployer -debug -remote -verbose -noexit -namemyapp -source
/export/home/beamon/applications/proxymon/proxy.war -targets TestMon-adminurl
t3://153.2.255.51:8001 -user system -password g00db33r -deploy
[wldeploy] DeploymentData : Delete Files:false
[wldeploy] Timeout :3600000
[wldeploy] Targets:
[wldeploy] Files:
[wldeploy] null
[wldeploy]
[wldeploy] Unpexpected Error Initializing Deployer: weblogic.management.ManagementRuntimeException:
weblogic.management.ApplicationException: [J2EE:160029]I/O error
while
reading
deployment - java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war.
[wldeploy] java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
[wldeploy] at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:467)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:63)
[wldeploy] at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1499)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1490)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:186)
[wldeploy] at sun.reflect.GeneratedMethodAccessor480.invoke(UnknownSource)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
[wldeploy] at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
[wldeploy] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
[wldeploy] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
[wldeploy]
BUILD SUCCESSFUL
Total time: 9 seconds
Please give some solutions..........this is urgent for me. I reallyappreciate
your time on this.
-s -
DAC: "error while reading repository table". Please help!
Hi everybody,
I copied DAC directory from server to a workstation.
DAC client on server machine runs normally.
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table".
I tried to find any DAC log file to get some additional information, but I couldn't.
The connection in DAC seems to be configured properly (test connection successful).
The only difference I found between server and workstation is that there are two Oracle homes installed on the workstation and one - on the server.
Thanks,
AlexSo you can read the tables now? Good to know.
Just as a hint: if you "tnsping" your data source from a command window, you'll see which path and file is used, so you can find out which home.
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 04-MAR-2009 16:42:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.1.0\client_1\network\admin\sqlnet.ora <--- my 11g home is used and not the 9i or 10g which also reside on this machine.
@DAC client can't connect to server: i.e. the icon stays red?
- Is your server up and running? (I don't want to start a flame war, but it happens to the best of us)
- Did you go through the steps here? http://download.oracle.com/docs/cd/E12513_01/doc/bic.101/e12653/dac_configure.htm
Cheers,
C. -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Error while reading the PO in the Backend system. Inform system admin
Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
TejaI am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna -
I created and deployed a BPEL process with a JMS adapter and DB adapter.
I have tested this and it works fine.
After a few days, I try to open the project and the BPEL process, and click on the DB
adapter and it throws an exception on the designer :
"Error while reading wsdl file ... (wsdl file name) NULL Exception"
This is hard to debug as the exception does not provide any info, NULL.
This has happened several times for my project. The next time the JMS adapter hit the
same exception while opening on designer. This one I notice happened after I imported
a new schema file (xsd) into the BPEL process.
Only way around that I have for this currently is to delete and recreate the adapters, which as time
consuming as I have to re-create and re-assign a lot of the activities.
Has anyone encountered this and is there a way to fix this without deleting/recreating the adapters ?
Thanks.I experienced the same issue and found the cause and a workaround;
"Error while reading wsdl file …. Exception: null"
http://www.petervannes.nl/files/b7c08911ce3cde3677e2182bbc5f032a-47.php
Edited by: 944333 on Jul 3, 2012 10:24 PM -
Error while reading PO in backend system Inform system adiministrator
Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj MalhotraHi
Have you tried out this ?
<b>There are two BADIs which might help you in achieving the job.</b>
<u><b>BBP_EXTLOCALPO_BADI</b> [Control Extended Classic Scenario ]
<b>and</b>
<b>BBP_GROUP_LOC_PO</b>
[Exit Grouping of Items for Local Purchase Orders]</u>
<u>Read the documenatation first, using transaction - SE18
before implementing them for your requirement.</u>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12
Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind -
SAP XI 3.0 - Error while reading the ID of own business system from the SLD
Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar
Maybe you are looking for
-
Table Name and Column name for Product Family Field under the Product Famil
Hi, Please help me finding the table name and the column name for the 'Product Family' field and the 'Item' field under the Product families form. The navigation to this form is as follows: Material Planner Responsibility -> Setup -> Product Family P
-
Any way to stop "verification" when allowing comments?
I've built a password protected website for a small community of users (about 90), and have authorized my subscribers to post comments on several of my pages. Given that my subscriber list is short, and restricted by password protection, the verifica
-
Problems with Master Collection CS3
Hi, got a bad deal, that activation code I received with the Adobe CS3 Master Collection from an Ebay seller is not working, what can I do? rc at [email protected].......by the way first ever here hope to get some help.
-
Wish to post KeyNote file as pdf. Export from KN to iW not working
Wish to post KeyNote file as pdf. Export from KN to iW not working - get blank screen. Tried to upload PDF to mobile me and link to that file - also didn't work. I'm not familiar with iFrames but have read about them in this forum - is that my only o
-
AppleMobileDevice using upto 100% of CPU, pls help
I have recently downloaded itunes 10.5.0.142 and since then I'm having major problems. When i start up the computer the AppleMobileDevice is using 100% of the CPU and won't allow me to do anything until the process is stopped. When i do finally get