I/O errors, writing and copy problems to array.

Folks recently I can't write to an array effectively. It is very very slow and usually stops.
- capturing to the array = no success
- copying from 1 array to the other = very slow/ error -36
I ran disk utility a couple of times, it found things to repair and did so. Results above are still the same.
RAID Admin does not say that there is anything wrong with the drives or arrays.
G5/ 3.5 TB Xserve RAID divided into two RAID 5 arrays (1 for backing up the other)/ 10.4.6 and latest RAID firmware, utility updates.
Please help/ advise.

Are you using copper or optical cables? I've seen flaky behavior like this when someone ran a chair over an optical cable. The thing about optical cables is... they don't totally stop working. They just get unreliable and slow.

Similar Messages

  • Hello !  error 1015 and other problems

    I'm user of iphone 3g (ios 4.2.1). My phone was jailbroken  but after jailbreak, ituens ask for restore of system. So i made this restore, and my problems appears. I cant restore soft, when i trying to restore i have error 1015, i try to use ireb, lubusb and other stuff. And myh phone is still blocked. Plz help me

    problem solved, i install a custom firmware 4.2.1. Problem appear because while i'm does jailbreak , i;ve install ipad baseband.  if u install custom firmware this problem disappear

  • Scale and copy problem

    hey I was wondering if anyone can help me, im trying to do a tutorial in a magazine and one portion of the work needs me to scale and copy using the command shift+alt problem is this doesnt work, the shift key alone does constrain the proportions and holding alt with shift contrains it from the centre point but it doesnt copy, holding alt alone does copy thou... this command doesnt work , I can do this using the scale tool but it the work needs to be very precise and the scale tool is more awkward cos i need to keep setting the point and its not always exactly the same... so basically why doesnt shift+alt constrain and copy a shape? any help would be great. my comp is new and dont have any bugs or other issues.. any help will be great! thanks

    lucillecasamadera,
    I've been using Illustrator since 1988. I have been an Adobe Certifed Expert in Illustrator since CS2. I can assure you you've either misunderstood the tutorial or the tutorial is simply wrong. (that does happen)
    Dragging a transform handle with the Alt key will never result in a copy. Illustrator simply does not work that way. There's nothing wrong with your version. You are trying to do something Illustrator does not do.
    You must use a dedicated tool (scale, rotate, skew, selection) in order for the Alt key to generate copies when dragging.
    You can argue it all you want... but that's the answer. Sorry it's not the one you wanted to hear.

  • Syncing and copying problem

    when i want to sync my ipod i get really frequnently an error massage saying: could not copy file to ipod. unkown error 69.
    so i read the faqs, but it is not the problem that the mp3s are broken or something. when i try again, the problem occours with an other mp3.
    and the other problem is: i can't copy larger files to or from my ipod without crashing it.
    i have reseted my ipod for several times and there is no change. please help

    I believe that you have already read the following
    http://docs.info.apple.com/article.html?artnum=302684
    You must find the corrupted music files on your iTunes and delete them before you do the syncing.
    You can try move the songs to a seperate playlist and do the syncing. Please do 50 songs per time until you find the corrupted files

  • Various bugs – Library view issue / import and copy problem / unsupported paths message

    In addition to the issues reported in a separate thread regarding importing video, there are several other bugs that are preventing me from progressing on a project and/or indicate instability in Edge Animate.  These issues don’t occur on new projects (yet), but are present in my current composition.
    I'm using the latest version of Edge Animate CC 2014 (2014.1.1) on a Windows 8 Pro (fully updated) system.
    Issue 1 – Library View
    For all the assets that have been imported, when I twirl down to view the thumbnail of each asset in the Library, nothing appears in the thumbnail area.  In earlier iterations of this project, all the items appeared correctly, but now nothing is there for any of the assets.  See sample below of what should appear (and what was there before), and what’s there now (nothing).
    Issue 2 – Asset Import Problem
    When I try to add an already imported image asset to the stage (or try to import a new image asset in the project), the item doesn’t appear properly – it just comes in as a dot with no height or width.  See samples below of what the imported asset looks like on the stage and its size information.
    Assets that were imported and placed before this bug occurred are still visible on the stage. But, if I copy one of these assets, the copy retains the size information, but does not appear at all. See sample.
    Issue 3 – Unsupported Paths message
    When I close the project, I get an unsupported paths message.  See sample.
    Despite this message, the assets appear in the project from within Edge and are present in the project if I open/preview the HTML file in my browser.
    Since these three issues relate to project assets, perhaps they are related.  I can provide a link to download this project if you like. Any help would be greatly appreciated!

    Hi Avinash,
    I'm glad you received the (large) project.
    In the meantime, I installed Edge Animate on another system (OS - Windows 8.1).  The Edge project exhibits the same problems on the other system.
    Thanks for looking into this!
    Regards,
    - Joel

  • HT1766 I have multiple issues, backup password, Gmail Error Msg, and ID problems.

    I want to back up to my computer, but can not remember my username. I thought it would be the same as my Apple password but it isn't. Is there anyway to recover it. I actually just want to turn it off.
    Also, does anyone know why my husband's phone defaults to my Apple ID everytime he wants to download something?  I look at the user ID in the Store and it has his user ID, but to sign it, it shows mine and wants my password?
    Also, I get an error message if I try and use the mail app for GMail. And sometimes purchase I make end up on husbands phone.
    P.S. I have Iphone 4S and my husband has Iphone 4. I hope that can help someone, so I can fix some of these issues.
    I know these are a lot of issues, but if any one can help even a little with one or some of these problems, I will be so grateful and a load off my mind.
    Thank you in advance.

    on your husband iphone - go to setting - app store - apple id - log out and log in with his id.
    If your using a app for Gmail, I suggest contacting the app developer or see if they have a support forum.

  • Installation and copying problem

    Whether I want to update my Adobe Reader 8 or try to download a ne Adove Reader 9 it fails when installing it. I receive the following message:
    Error 1402 Could not open key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional\Components\MSFS
    Veryfy that you have sufficient acces to that key.
    What am I supposed to do?
    My second questions is that I sometimes copy a few words from a sertain PDF-document and then paste them on a Word document. For some reason it does not work any more - copying works but when I paste the word on Word it is transformed to some block letters meaning nothing. What is wrong?
    Would be most happy if you can help me.

    Please see:
    Error message when installing, modifying or repairing Adobe Reader

  • Hp all in one c 5280 error scanning and copy black sheep result

    a year ago inpresora buy a C5280 all in one, but since two months ago, when I try toscan or copy pages out completely black. please help

    Hello BowlerPeter,
    I understand your not able to use your copier or scanner and are getting a full page of black. Please click on the link provided to troubleshoot Copy and Scan Outputs are Completely Black. Please let me know if this helps, hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Invoice split and copying problem in JEX invoice after ECC6.0 upgrade

    Dear All,
       After upgrade from 4.6c to Ecc6.0 I am facing following problem in STO billing document(JEX)
    1) system created two billing documents for each line item, even though the correction note 885024 applied maually. In 4.6C the system generates single document for the main FG code.
    2) The STO line item contains one FG material and one Returnable Packaging material. The system copies packaging item instead of main FG code. In the 4.6c system, the billing document consists only singe line item.
    Hope I had summarized the issue well and waiting for expert guidance...
    Regards
    Sunil Nair

    Hi Sunil,
    pls check the following criterias in your materials.
    Plant
    shipping point
    shipping conditions
    Transportation grp
    Loading grp
    Regards
    Kedasu

  • IPod Shuffle (1st Generation) NEW ERROR: recognize and charging problems

    I'm tired. I'm quite tired.
    I struggled for a month to resolve the 1418 error (My previous posts had thousand of views, until Apple removed them...).Finally Apple gave us the iPod Shuffle reset utility, which worked fine... My iPod Shuffle resurrected.
    But now it's dead again, like many other users:
    1)When I attach the iPod Shuffle to any PC, or to the wall charger, or to whatever, it's not recognized. Tried all
    2)It still plays music
    Apple, what's going on? I think you are swimming in the dark...
    Sony Vaio FS315H   Windows XP  

    Here another one.
    1st gen iPod Shuffle, stopped working after update to iTunes 7.0.x, which was basically forced to my system.
    Every time I plugged my iPod in, it said: "Do you wanna update? Latest version? Get along? Do not think you can do without this update?".
    I eventually agreed to upgrade my software, since it 'would update my iPod to the latest firmware'.
    Well, it did not.
    It killed my iPod Shuffle.
    I see you have the same thing here.
    So, what's the procedure to get a working one in exchange?
    Since this is Apple's fault, I expect there to be a procedure for it?
    iPod Shuffle 1st gen.

  • Problem returning array of strings

    Hi,
    I am trying to return an array of strings from C to Java.The function I am using is
    char rec[20][20];
    int num=0;
    /* incrementing num and copying into the array everytime a record is added*/
    JNIEXPORT jobjectArray JNICALL Java_jnimidlet_list_1rec
    (JNIEnv *env, jobject obj)
    jstring str;
    jobjectArray args = 0;
    jsize len = num;
    int i=0;
    args = (*env)->NewObjectArray(env, len,
    (*env)->FindClass(env, "java/lang/String"), 0);
    for( i=0; i < len; i++ )
    str = (*env)->NewStringUTF( env, rec);
    (*env)->SetObjectArrayElement(env, args, i, str);
    return args;
    In the java code:
    String []all=list_rec();
    when this function is called I get the error:
    Unhandled exception
    Type=GPF vmState=0xffffffff
    ExceptionCode=0xc0000005 ExceptionAddress=0x00000000 ContextFlags=0x0001003f
    Handler1=0x10f01530 Handler2=0x10026280
    Module=C:\wsdd5.5\wsdd5.0\ive\bin\j9.exe
    Module_base_address=0x00000000
    Offset_in_DLL=0x00000000
    EDI=0x0012fc14 ESI=0x10f01530 EAX=0x00020020
    EBX=0x00148e34 ECX=0x0017469c EDX=0x00020020
    EBP=0x00149d40 ESP=0x0012fbec EIP=0x00000000
    Thread: main (priority 5) (LOCATION OF ERROR)
    Thread: Gc Thread (priority 5) (daemon)
    Can anyone pls tell me how do I come out of this problem.
    Please help.
    Thanx in advance,
    pri_rav

    Hi Priya,
    I dont see any problem. I tried to work with your code it works fine without any exception. Please make sure all ur rec char buff contents are null terminated and your 'i' counter is initialized properly and stops properly. According to me there shouldn't be any problem with JVM. I hope you are aware of c programming,which doesn't check for array boundaries. You may accidentally go out of array size allocated. So my suggession is to check you rec buff going above any of the dimension. Put a watch on 'i' variable content as well. Try and let me know whether it solves your problem. If it doesn't reply me with more details. I will try helping you.
    Thanks,
    Regards,
    Ravikiran.

  • Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume.  This follows a problem when Time machne terminated when the volume was almost full.

    On 11/1/2011, Time Machine (TM) terminated with an error message I did not record.  I noted that the drive was full and decided to do a separate complete bootable  system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean.  Part way through the full system backup CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16".  That was about the time that TM malfunctioned, so I assumed they were related.  After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours.  I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume.  I also erased and reformatted the TM volume.  However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume".  I restarted the computer with no change in results.  Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup.  I ran Techtool and no problems were found.
    I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive.  My hard drive is only about half full at 246 GB.  My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
    I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours.  I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination.  As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty.  As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing.  Now my question would have to be - what could possiibly have happened to make it perform this way?   It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

    jcm21 wrote:
    CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
    You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
    "Unable to complete backup. An error occurred while copying files to the backup volume".
    One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like).  See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
    If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem);  and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Using Time Machine to back up two systems, OS10.8.3, and OS 10.6.8. Sometimes it backs them up, sometimes I receive this: Backup was not performed because an error occurred while copying files to the backup disc. The problem may be temporary...

    Using Time Machine to back up two systems, OS10.8.3, and OS 10.6.8. Sometimes it backs them up, sometimes I receive this: Backup was not performed because an error occurred while copying files to the backup disc. The problem may be temporary...

    Hello,
    Thanks to the great Pondini...
    http://pondini.org/TM/C3.html

  • Difficulty sending photos through iPhoto 11 often get a connection error.  When I go to my email and copy the photos in email the emails go out always with never a problem

    I have difficulty sending photos through iPhoto 11 often get a connection error.  When I go to my email and copy the photos in email the emails go out right away and never seem to have a connection problem?  Why did they cahnge the process for sending photos form iphoto?

    It is an addition option some people like and other do not (I do not)  --  to use it as always is trivial - in the iPhoto preferences set Apple Mail as the e-mail client
    LN

Maybe you are looking for