I/O Plugin on Main Out Bug?

Does anyone know if there is a bug to where if you insert the I/O plug on the main output it doesn't function (i.e. no sound?). I am running a typical mix session right now, where i have 10-20 tracks routed to 4-5 buses, routed to my Main out 1-2 and whenever the I/O plug is inserted on the main, I get no sound. I'm sure that my routing is correct, because I can move the same exact plug onto any stereo bus, and it works perfectly, just not on the master. Any help would be appreciated.
Thanks in advance,
Ryan
Blue Room Production
P.S. - I am running all the latest drivers, and have tried repairing permissions, to no avail..

In the environment window, create an input object that corresponds to the physical i/o channel you want to use to send to your outboard unit. Once the input object is activated, set it's output to nothing. This allows the i/o plug to work on the main output without having to reroute anything.....

Similar Messages

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a copy but I have seen no way to get it.

If you registered your Lightroom with Adobe after you installed it, you can log into your Adobe account and get your serial number from your account.

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

michaelvee wrote:
As an overworked professional, I simply have to consider the very viable options out there. Never thought I'd be seriously considering a Cubase product.
It's a Steinberg product, not a Cubase product.. in case you haven't been paying attention Steinberg developed the virtual instrument for use in it's programs way back in Cubase 3.55.. the plethora of virtual instruments and the advent of low-latency drivers can be directly traced to Steinberg/Cubase development.. Logic also borrowed Cubase's arrange page format back in the 1980's. Cubase has borrowed from Logic to be sure but Steinberg has long been an innovator for many of the things we take for granted today. It was Logic/Emagic who licensed the VST technology and ASIO low latency format to use in Logic 4.xx. It was Apple who adapted VST to it's own AU format. Also, Cubase and Nuendo have undergone a lot more innovation over the past three years, Yamaha has been good as a parent company. Cubase is not Nuendo's little brother by the way, they are very close, same exact audio engine, same robustness, they can exchange files, the only difference being Cubase doesn't have some of the high end post features that Nuendo has. I use both Cubase and Logic and occasionally Nuendo at the University here.. I know both programs fairly well, believe me, both Cubase 6 and 7 can hold their own with any DAW out there, they just don't come with a bunch of ready made loops and preset instruments.
LogicX will never be able to use 32-bit instruments without a third party solution, nor will it ever include the Bridge. At least according to the people I know.

Ipad 2 with version 8.1.3; update to take out bugs etc and now every time I click on an app it asked for my itunes id before I can get it to open; any help would be appreciated

I did the update to take out bugs etc; now when I try to open an app, it asks for my Itunes ID before it will open; this is a pain; has anyone else had this problem or knows how to correct this, assistance gratefully appreciated, thanks

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Trying to load 3rd party plugins in Main Stage

I'm trying to load 3rd party plugins in Main Stage. I get as far as creating a new channel strip. When I click and hold on I/O, however, the dropdown only goes down as far as "Garageband instruments." Shouldn't I also be seeing "AU" instruments below that? Can anybody walk me through doing this function?

Hi,
you might try a macro / keyboard recorder. I use autohotkey (www.autohotkey.com). If you have selected one or more items in the grid view and press ctrl-shift-n this script:
;LR Start external editor #7
^+n::
#IfWinActive Adobe Photoshop Lightroom
Send {RButton}
Send {Down 8}
Send {Right}
Send {Down 7}
Send {Enter}
return
opens the files in the 7th external editor. Of course the number depends on your installed editors and might change with additional editors.

I need some help with limiter on main outs, gurus please read :)

Hello, I've just recently switched over from PT and I noticed almost immediately upon getting into logic that the main outs seem really loud when following my general mixing workflow that I'm use to using. In fact so much so that I can't really get a final product using ozone 4 like I was able to in PT. When I go to use the final stage of ozone 4 (the limiter) to maximize my volume without clipping, it pretty much just crushes my dynamics and overall mix into rubbish. What's going on here? What am I doing wrong? I'm not even limiting that much. Whereas before in PT I could limit it much more if I wanted to. Is there a setting somewhere in logic i'm missing? I know Pro tools and logic are different beasts so save the crappy comments, but there is a huge difference in main output behavior that just doesn't make sense to me and causes the same plug in (ozone 4) to act much differently.

Well it's not a mental hang up, as I've tried turning down the master fader substantially and ozone 4 still reacts differently than in PT, it sounds better without the loudness maximizer going, fuller and more dynamic. Whereas in PT I was able to utilize the maximizer to bring the volume up to a point and still not smash the mix. I've noticed this with pretty much anything I use a limiter/maximizer on in Logic. I don't understand what's going on. Surely I have something set funky somewhere? It's like it's putting a brick wall limiter on the mix even when I set it to intelligent and tweak everything a bit my meters just straight line, no movement, as if I have my volumes cranked to the max. Very subtle settings in ozone
we're talking -0.4 margin threshold -2.1 character set to very fast in intelligent II mode. This normally gives me a pretty decent amount of threshold adjustment to maximize volume. I'm stumped.

Channel strip "settings" for aux or main out ... not showing in Library

Hi Guys
One of the things I love about the "settings" box at the top of each audio channel is that you can click on it, and then use the Library list on the right of the screen to pick through the settings and even try them out in real time...
I want to do the same thing for some of my Aux channels or even sometimes the Main Out channel, but there doesn't seem to be a way of clicking on the "settings" button for these channels and seeing what's available for them in the Library.
Does anyone know what I'm missing here? At the moment I seem to have to HOLD the settings button, and then choose from the category and then choose the effect. Which is fine if you know what you're looking for, but if you want to just go through various effects and try them while the song plays, this is kind of tedious.
If you can shed light on this, that would be awesome!
Cheers,
Mike
PS - 8 days in to my switch from Cubase 4 to Logic 8 and the initial feeling of "what have I done? I feel lost, bring back Cubase" has turned into "Why didn't I do this sooner?!"... Logic is AMAZING! And Cubase now seems so clumsy...

Hey Jorge,
Thanks for the reply - yep, it's cool to be able to save strip settings for aux strips and for the main out as well, to make "my" sound and keep my songs consistent.
However there are some really great pre-set settings for these strips. They can be accessed the "slow" way by holding the "Setting" box at the top of the strip, and then choosing a category and from there a preset.
But I really want to be able to go through these preset strips quickly by using the Library... you can do this for normal audio channels, and it's great to say be able to click through "bass" presets one after the other while your bass audio track is playing...
But for the aux and settings strips, I can't get the "settings" to show up as a list in the Library...
Does anyone know how this is done?!
Cheers and thanks,
Mike

Full Screen - Main Viewer Bug in Aperture 2.0

When I enter full screen mode the "Main Viewer" button on the toolbar that allows one to view either multiple and a single image is grayed out UNLESS I have the viewer panel displayed before entering full screen mode.
Anyone else noticed this?
dbk123

Tony Finnerty wrote:
I had been using Aperture 2.1 for some time with only the usual bugs, most commonly, the Viewer screen going black or blue or red occasionally, but a new bug has appeared that is forcing me to restart Aperture frequently. After making edits, when I move on to the next image in the Browser (the thumbnail highlighting changes, as it should) the image in the Viewer does not change. I have not found a way to get a new image in the Viewer except restarting Aperture. This is greatly slowing down my processing of big projects.
Has anyone else seen this bug? Have you found a workaround beside restarting?
can u guys please give us a little more info? where's the aperture library located? in your main hard drive (os x) or on another drive?
are you sending the crash logs to apple?
thanx,
victor

Logic pro x mixer window freezes main out VU with dual monitors

In a dual display configuration, with the mixer window in the left monitor and arrange window in the right monitor, the VU meter on the last channel strip to the far right of the mixer window(which is usually the main output) freezes and does not update. This seems to be a Logic X bug, since it does not occour in Logic 9 or any other DAW with the same configuration.
Can anyone confirm this or have a suggestion for a solution?
Thanks in advance

They have had four years to change this, and actually people were asking for it before that. If anyone knows a way, let us know, but I doubt it. Both Logic and Cubase are the only two DAWS that don't allow this....all the majors do....Pro Tools, DP, Studio One, etc. Cubase users have been asking for it forever as well.
I would have upgraded immediately if they had added this, they haven't, and I'm moving over to PT11.
TH

Does iOS 8 fix the wifi 'grayed out' bug in iPhone 4S?

Hi.
I have an iPhone 4S which is running iOS 7.1.2 . Apparently, the wifi was working before upgrading to ios 7.1.2 (from ios 6.1.3). The wifi option is 'Grayed out" in the Settings app and my Mac address is seen as 'N/A' . There are so many 'fixes' for it two of which are temporary (freezer fix and blow dryer fix) It's a really big inconvenience to not have a wifi connection especially when downloading some big files. For those who have used iOS 8 on their iphone 4S (developers et al) does the new and improved iOS version fix this bug? It's nerve racking because I dont know how to save SHSH blobs meaning I cant downgrade from iOS 7.1.2 to iOS 6.1.3 just to get my wifi working. My best bet right now is that iOS 8 will have a fix for this problem. Buying another iPhone is not an option for me right now as my cash is tied up in some projects. Please help.

Ok guys,
I don't know if these helps but I'm going to describe what happened to me with these, first I must say I have an iphone 4S which when bought, the wifi was working fine. The Wifi grayed issue started happening right after I updated IOS version 7.1.1 to 7.1.2. At first I noticed the phone was becoming slow as **** and that my phone won't connect to any Wifis, so I switched my wifi off and my phone became fast again. If I happened to turn the wifi on again my iphone would just become slow again.
I went an try to look up the issue solution on internet forums and apple support page but noone seems to have definitive solution. Now I read the hairdryer and freezer method, but I don't trust it since, as apple points out, might lead to hardware damage but it kinda make sense to me that something might be wrong with the wifi chip. I read in another forum that if I just erase or restore (I can't quite remember right now the right name) the network configuration it might solve the problem, but it seems it doesn't work either.
I ran out of options and just waited for IOS 8 to come out and correct the problem, but it didn't. So I came to the conclusion that this is in no way, a hardware problem unless update 7.1.2 just damage hundreds or perhaps thousands of iphone 4S, which I think is rubbish. This is without a question a software issue, might be some software incompatibility with the iphone 4s wifi chip.
So to summarize all of these, what happened to me was:
1) iphone 4S is version 7.1.1 - WiFi works OK
2) Iphone 4S updates to version 7.1.2 - Wifi no longer works
3) Iphone 4S updates to version 8.0 - Wifi still doesn't work
I tried the following to solve the issue:
1) Reboot the device - Fail
2) Restore Network configuration - Fail (grayes out the wifi)
3) Update to IOS 8.0 - Fail
4) Turn on Airplane mode and after 20 seconds off - (ungrayes the wifi but still cannot connect to any wifi)
What I am currently experiencing with IOS 8.0 (it happened also with 7.1.2)
1) Trying to open "Settings" if wifi is on - it is slow 70% of the time
2) Trying to open "Settings" if wifi is off - Opens up normally
3) Trying to open "Settings>Wifi" if wifi is on - opens awfully slow and no wifi is listed
4) Trying to open "Settings>Wifi" if wifi is off - opens up normally
I hope these helps you apple guys, please fix this issue as my iphone is spending my data plan since I cannot longer use WiFi.

Lightroom 5.2 and Mavericks Lights out bug with dual monitors

I installed OS X Mavericks on my iMac which has a second NEC display connected and that I use as my main display. When I activate "lights out/lights dim" pressing "L" on the keyboard my primary display (NEC) doesn't change at all but the secondary display (iMac) is the one that dims the lights on the interface. Makes no difference if I have the secondary display active as a second screen for Lightroom or not. Lights out/dimm dosen't work on my main interface display.
Anyone seeing this as well with their second display?

I am having the same issue and wondered what was the issue. Thank you for posting; now I remember Lightroom didn't start doing this until I updated to Mac OS Maverick. The only time I don't have that problem is when I physically disconnect my secondary display from my computer.

"Play in to out" bug with multicams (cc v7.2.2 and v8.0)

When looking at the audio waveforms for a multicam in the source panel, if I then set an in&out mark, then hit "Play in to out" it plays the previous in-to-out. This is really annoying when I'm trying to pull clean soundbites out of multicams. Anybody else notice this? I've observed it on multiple systems running os x 10.8.5 & 10.9.2

@Donna – actually there is a preference for enabling/disabling "Ungroup Remembers Layers" in the General Preferences of InDesign.
But it is not revealed in the UI. You can only access it by scripting. Here the code to set it to false (not checked) in ExtendScript/JavaScript:
app.generalPreferences.ungroupRemembersLayers = false;
Note: Thanks to a hint by Olav Kvern, I could find it in my OMV* of the ESTK** after forcing the ESTK to create new OMV xml files by removing the old ones.
It's over my head why the ESTK isn't doing the update automatically, if a new dot version is installed over the old one.
Maybe someone here can shed a light on this.
It seems to be a bug in the ESTK, because the ESTK is only showing the wrong app version wheras if you ask for app.version it is telling the right one:
Now I think all my OMV xml files are up to date for InDesign CC 2014.2:
omv$indesign-10.064$3.0.xml
omv$indesign-10.064$4.0.xml
omv$indesign-10.064$5.0.xml
omv$indesign-10.064$6.0.xml
omv$indesign-10.064$7.0.xml
omv$indesign-10.064$7.5.xml
omv$indesign-10.064$8.0.xml
omv$indesign-10.064$9.0.xml
omv$indesign-10.064$10.0.xml
omv$indesign-10.064$10.1.xml
omv$indesign-10.064$10.2.xml
Uwe
* OMV => Object Model Viewer
** ESTK => ExtendscriptToolkit

How to find out bug report status or disposition?

Is there someone to contact; or, is there a way to find out the disposition of a bug report which has possibly not been assigned a number yet, or whose subject has been changed (i.e. can't be found in a search) ?
About 3 months ago I submitted a report with the subject, "TrueTypeFont.open() ..." related to Linux JDK 1.5.0 runtime.
Thanks,
Dick

Seems like a search of the bug report submission
queue would be useful.Use this:
http://developers.sun.com/contact/feedback.jsp?referer=http://forum.java.sun.com&category=sdn&mailsubject=Forums%20or%20Community
It's as pointless as any other measure in getting Sun to do what you want. ;)

Yet another nasty punch in/out bug

What is this?? Punching in before a region then punching out inside the region DELETES IT! This is in replace mode. Am I missing something here? Check it out:
http://www.youtube.com/watch?v=WqJ4hyYT1Ak

Murray Campbell wrote:
This quote from the 9.02 update page:
+- Flex Markers can align & snap to MIDI notes _Performing a punch-in recording with Replace Mode now behaves correctly_+
Isn't the problem discussed in this thread exactly the bug that 9.02 is supposed to have fixed?
This is not the problem. Replace mode was broken with the release of version 9, but was fixed in the 9.02 update.
The problem we're discussing here, is, the audio region that follows the punch out point often now disappears from the arrange page.

Loopback fade out bug!!!

Hi!
I am trying to make Mainstage 2 work as my full instrument-setup on stage.
My setup in Mainstage is 3 loopers, 2 playbacks and a keyboard with different apps.
I just wanted to hear if anyone has discovered a bug when using fade out in the looper.
After pressing fade out it erases the recorded loop.
I really hope that a update is coming soon.
I would love to use mainstage because it is very easy and "logical" but right now there is still too many buts and bugs.

I've experienced this, however only when Loopback is not playing. Enough to make you say bad words....

I/O Plugin on Main Out Bug?

Similar Messages

Maybe you are looking for