I/O problems after installing latest 10.5.2 update

Since the last 10.5.2 update, when I close the lid on my 15 inch MacBook Pro, it goes into sleep mode, even though I have an external keyboard, mouse and LCD monitored plugged in. Before the latest update, I used to be able to close the lid and work using external monitor, keyboard and mouse.
Help appreciated

I closed Acrobat, then closed other apps, then re-opened the PDF in Acrobat. Seems to be ok now.

Similar Messages

Autofill stopped working after installing latest OS Mountail Lion update Can anyone help? I've gone into preferences and

Autofill has stopped working after installing latest update to OS X Mountail Lion (10.8). Latest of many problems with this OS - wish I had never upgraded to it. Can anyone help?

Hi Eric, it is Safari but I thunk I've solved it by dragging the autofill into the safari toolbar and clicking on it when I want to use the fearture. Nothing else worked. this OS is a crock as far as I am concerned.

Java after installing latest 10.7 ios update

Browser = Firefox.
A business website that I use no longer works right after installing the update. I read that Java is the problem. The functions on the site are not working properly. How can I uninstall the last update?

MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

Problems after installing latest itunes

I installed the latest itunes 9.0.1 the other day, since then my ipod nano ,3rd gen, wont sync, a message comes up when you plug it in saying 'new hardware found, there was a problem with installation and may not load properly' then continues to do nothing. when i plug in my sisters ipod 6ogb 5th gen on her itunes it says 'ipod service module (32 bit) has encountered a problem and needs to close'.
tried resetting the ipods but that didnt helpnot a computer wizz so need help in simple terms please!!

(default) REG_SZ (VALUE NOT SET)
APPLE APPLICATION REG_SZ =JJ*5.q6R9m~e?-X$O^7!5sPG*i7c9a%EIdQdnl&dib_....
CRT-winSXS REG_SZ _i0Y]s!soe8MkbIdFwUv$f.Z@}4G(*9MkbIdFwUv$f.Z....
Good job, Natters. On doing the same search through my own registry I find the same results and my Device manager *isn't* blank. So I'm not so inclined to think it's the SP3 problem anymore. Again.
So the other thing that I would be worried about is a malware infection. *Apropos* adware can cause a blank Device Manager, although other similar varieties may also cause similar problems.
In order to get that possibility off the table, I think you should try heading to a reputable Malware removal help forum where somewhere can have a good look through a HiJackThis log of your PC, and can advise you how to fix any problems that show up. There's a list of reputable malware help forums at the bottom of the following page (although there are others out there):
http://www.doxdesk.com/parasite/links.html
(Not trying to get rid of you, just trying to get you on the radar screens of people with the right set of skills.)

After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer. Any suggestions?

After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

Installing the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer.   Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network.   Talk nice to it.

Problems to sync my computer calendar with my Iphone after installing latest Itunes download

problems to sync my computer calendar with my Iphone after installing latest Itunes download

When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

Problems after installing 10.5.2 update

Any one else getting error messages via Disk Utility of various types after installing latest update. Going from a clean install with a clean bill of health, to bad directory messages after installing update 10.5.2.
Input/ output errors, etc
ACL errors- I've never seen this until installing 10.5.2.
I also get corrupted directory errors that disk utility is unable to repair disk.
imac G5 takes at about 5 Minutes to start up and for desktop to become active.
I wonder if these are common experiences with Non-intel Leopard 10.5.2 users, or are these issues common to everyone that installed the update?

here was little space on my startupdrive so I suspect that this caused the problem.
That's a big time problem. You may have to connect another Mac to your laptop and boot your laptop into FireWire mode to clear out about 10 GB of space on it and then run the 10.5.2 Combo updater from the other Mac. That's one of the problems with having Software Update being automatic. I never use it.
OT

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

What's Happening?? Some days after installing latest security up date for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes.No other CD or DVD disk will mount.

What's Happening?? Some days after installing latest security update for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes. No other CD or DVD disk will mount.Is this a unique experience?

Hello Robert,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
in my ipod.

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

802.1x Problem After Installing Update 10.4.10

After installing the 10.4.10 update (from 10.4.9), I have started having problems with authenticating using 802.1x over my wireless connection. I enter my login information when prompted, and after a few seconds (when it says "Authenticating..."), it comes back with an error:
WPA Authentication Failed.
Security Error: 0
If I try authenticating several more times, it will eventually work. It is not a signal strength issue, and it is not me mistyping my username and password.
The only error in the console.log that I see is:
/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: Could not start 802.1X
This only seems to affect my attempts to log in using 802.1x. I am able to associate with WPA and WPA2 networks using pre-shared keys without any issues.
My 802.1x settings are as follows:
Network Port: AirPort
Authentication: TTLS (all other un-checked)
- TTLS Inner Authentication: MSCHAPv2
- TTLS Outer Identity: (blank)
AirPort card information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.1.8.5
Kernel Extension information:
AirPortAtheros:
Version: 2.3
Last Modified: 2/27/07 9:32 PM
Get Info String: 2.3, Copyright © 2006–2007 Apple Inc. All Rights Reserved.
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.k ext
kext Version: 230.8.5
Load Address: 0x98c000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Correct
Any ideas? Thanks.
MacBook Mac OS X (10.4.10)

Found the problem... It turns out it is not related to the 10.4.10 patch, but it is still specific to MacBooks and the way they do EAP for 802.1x authentications.
The problem was with the default settings on the Cisco/Airespace wireless controllers, which we have recently migrated to. It has a default EAP timeout/retry of 2 seconds, so depending on how long it takes you to type in your login information and submit it, you might fall outside the 2-second window where the controller is accepting that login. The solution was to increase that window on the wireless controller itself.
My guess is that Windows automatically retries, which is why Windows users did not see this problem.
Mac OS X (10.4.10)

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

I/O problems after installing latest 10.5.2 update

Similar Messages

Maybe you are looking for