I/O Speed for the HP H221 Host Bus Adapter- Need IO/s or IOPS

Please point me to HP specifications with I/O Speed for the HP H221 Host Bus Adapter.
650931-B21
HP H221 Host Bus Adapter
The parameter needed is the IO/s or IOPS – ie number of reads/s – or Writes/s that can be achieved

Phil.
Dimensions (excluding bracket)
6.6 x 2.7 x 0.6 in (16.8 x 6.86 x 1.6 cm)
Disk Drive and Enclosure Protocol Support
6 Gbps SAS (Serial Attached SCSI)
6 Gbps SATA (Serial Advanced Technology Attachment)
Architecture
Serial Attached SCSI (SAS)
Serial Advanced Technology Attachment (SATA)
SAS Connectors
2x4 external SFF-8088 (Mini-SAS)
Data Transfer Method
600 MB/s bandwidth (1200 MB/s, full duplex) per port for combined throughput of up to 48 Gb/s
PCIe Bus Speed
PCIe 3.0 x8 (8 GT/s maximum theoretical bandwidth) or PCIe 2.0 x8 (5 GT/s maximum theoretical bandwidth) depending on the model
Port Transfer Rate
24 Gb/s per x4 Wide SAS Port (4 x 6 Gb/s)
Memory Addressing
64-bit, supporting servers memory greater than 4 GB
Upgradeable Firmware
4-MB flashable ROM online/offline
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04322800
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

What is the average speed for the fans? Mine seem really slow.

What is the average speed for the fans in a MacBook Pro? When my computer is fairly idle, like right now, the fans are at roughly 1000 rpm each. Is that normal? I have seen posts where the fans are 2500-5000 rpm, so mine seem a bit low. That may explain why my computer has been getting hotter more quickly lately - this started happening after Apple replaced my logic board a few days ago.

I installed smcFanControl2 and according to that program, Apple's defaults are 2,000RPMs and the program will not let you set it any lower than that because of the increased risk of damage.
My fans are always at 2,000RPMs during normal usage, and then once I fire up a DVD or Photoshop it usually goes up to the 3,000s or so.

HP H221 PCIe 3.0 SAS Host Bus Adapter Debian Driver

Hi
I have a hp server is running under Debian 7.I want to buy a HBA card for this server but I don't know if Debian is not compatible with finded card model. is there any reference for check this.
Server Model : HP ProLiant DL380p Gen8 E5-2630v2 1P 16GB-R P420i/1GB FBWC 460W PS Server(704559-371)
HBA Card Model : HP H221 PCIe 3.0 SAS Host Bus Adapter
Thanks.

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VAXJUXl0y9I

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?

I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?

The device is locked to the carrier it was purchased through unless you specifically purchased it as unlocked directly from Apple.
Only the carrier to whom it is locked can authorize it's unlocking. To do so, the user much contact them to start the unlock process.

I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this since yesterday. Is this right??

I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this task since yesterday. Is this right??

No. Quit and try again. If that fails again,
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy

I purchased Adobe Export PDF Annual. The cost was 23.00 for the year but I don't need this so I'd like to cancel this subscription. How can I do this?

I purchased Adobe Export PDF Annual. The cost was 23.00 for the year but I don't need this so I'd like to cancel this subscription. How can I do this?

See http://helpx.adobe.com/x-productkb/policy-pricing/cancel-subscription-acrobat-online-servi ces.html
[topic moved to Acrobat.com Services forum]

HP SC44Ge Host Bus Adapter

SUCH HELLO.
I HAVE A HP SC44Ge CONNECTED TO Host Bus Adapter PCI EXPRESS SLOT ON A SERVER WITH WINDOWS SERVER 2008 R2, NOT ME THIS HARDWARE DETECTED, AND THE ADMINISTRATION OF DEVICES OR ANY OTHER PLACE WHERE YOU CAN SEE IF THE CARD IS WELL CONNECTED ; IN THIS CARD ON A LED FLASHING.
COULD HELP ME?

Hello @JohnRambo,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand aht you are having issues with your Server and are seeking assistance. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Servers.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Is there a way for the 5s to HOST CONTROL devices via Lightning or otherwise?

So I asked this question in the regular Apple forum because I am trying to help a company why is not very Apple savvy
figure out how to offer the same level of control they offer on Android devices with the iPhone 5, 5c and 5s. They realize
there are restrictions on the Lightning side but I was wondering if such functions can be controlled via the 3.5 jack being
as that is an output source for the iPhone.
I realize the EASIEST solution is for them to make their device BlueTooth capable and that would solve the issue right
then and there but they already have several thousand units boxed and ready to go so this would be a solution for all their
customers who own Apple devices and do not have the ability to control the device the way Android users can.
If anyone knows of ANY device that can be host controlled by any Lightning cabled device, please let me know so they
can look into it and get this going.
Thank you.

I can't answer the "host control" part of your question, but there are plenty of devices that can be controlled by an app running on the iPod. For example, the Square credit card reader connects to the headphone jack.
If the device vendor wants to use the Lightning port, they should join the MFi Program.
https://developer.apple.com/programs/mfi/

I am getting the following error " The following requirements should be met for the RD Session Host Servers in the collection"

Hello All,
I have a windows server 2012 R2 build 9600, I have installed all the required Terminal Services and configured a Session based collection. I have verified that all services are running including the RD Session Host and I am using an Administrator account
for the set up. All the terminal services are installed on a single server, Domain Controller is installed on a separate one.
When I try to add RemoteApp Application to the collection i get the error bellow::
Can any one help solve this problem, I tried to trouble shoot this with out success.
Thank you.
Ron

Hi,
Thank you for posting in Windows Server Forum.
Does the RD server joined to domain or in workgroup mode?
Are you trying to use RemoteApp?
What’s your client OS and RDP version used?
From your description there is issue with the installation and configuration of RD server. You can check the configuration part and follow the below link for rechecking all the steps. In addition to the steps you have performed, please see whether the user
is member of “Remote desktop Users” local group. Try with enterprise version on client system.
Step by Step Windows 2012 R2 Remote Desktop Services – Part 1
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Very bad broadband speed for the last 4 days...

Hi all,
for the last 4 days, I am experiencing some big difficulties with my broadband connection.
Half the day it is fine (morning), half the day is it terribly slow, to the point I cannot connect to any website.
This affect not just my computer but all my other devices connected to the internet : second pc, Xbox 360, PSP. Thay use all wired connection, exept the PSP.
Here are 2 speed test carried one when it works fine,and one not so well:
I have done the 2 first Speedtest, the third one does not woks.
What I have tried to fix the problem :
change router
change noise filter plugs
reset
nothing works.
I have visited the BT Major Service Outages, but nothing is reported in my area.
Can you help me find out what is wrong please?
Thank you for your help

I'm now back on the website....
Love to know what is going on here...
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 02:48:06
Downstream:
7.938 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Fast
Noise margin (Down/Up):
8.2 dB / 22.0 dB
Line attenuation (Down/Up):
32.1 dB / 20.0 dB
Output power (Down/Up):
19.8 dBm / 11.9 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
66 / 1
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
95 / 0
Error Seconds (Local/Remote):
64 / 1

Slow speeds for the past 2 weeks

For the past 2 weeks I have been having very slow speeds. At first I thought it was the westell modem which kept powering down, rebooting every 30+ mins or would save the network settings. Purchase a new modem still have the slow speed minus the constant reboots and loss of settings.
Any chance to get my speeds up to what Iam currently paying for?
Package: 1.5-3Mbps
Speed tests form diffrent sites 0.399Mbps to 0.412 Mbps
Former modem: Westell 327W A90-327W15-06
Current modem: Actiontec GT784WN
Downstream Speed: 480 Kbps
Upstream Speed: 448 Kbps
SNR Downstream : 6 dB SNR Upstream : 10 dB
Attenuation Downstream : 63 dB
Attenuation Upstream : 31 dB
Power Downstream 14.3 dBm Power
Upstream 11.9 dBm

Your line isn't in a very good shape to be running on the 1.5Mbps-3Mbps package. As it stands, you barely have enough capacity to support even 1/3 of the 1.5Mbps provisioning. There's simply too much noise.
What you should do first is take one of your modems out to your NID, if you have access to one and plug it into the test jack found inside of the NID. If there is a telephone plug already inserted into it, remove it to gain access to the jack (this will disconnect your home's wiring until you reconnect it). From there, sync up the modem and post up the new Transceiver Statistics you obtain.
Have your speeds been at 1.5-3Mbps in the past? That would also help us. Lastly, if you have Voice Service with Verizon, do you have any noise on your line, such as humming, buzzing, loud static or popping?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Incredibly slow internet speed for the past 2 days...

Yesterday I bought an ASUS N55U and spent a few hours setting it up. When I finally connected devices to the router, I had been reduced from 8mb (as offered by my ADSL Max connection) to a download speed of 0.1mb. I assumed this problem was due to the new router so I switched back to my BT homehub 3. Suprisingly I still have the identical problem and I have no idea how to fix it. Here are my results for the adsl line status:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:47:40
Downstream:
7.938 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.2 dB / 29.0 dB
Line attenuation (Down/Up):
19.7 dB / 9.0 dB
Output power (Down/Up):
19.9 dBm / 12.1 dBm
FEC Events (Down/Up):
16759 / 0
CRC Events (Down/Up):
0 / 1
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
49 / 34
Is there anyway I can fix this problem, and if so can I use my new router or should I just stick with the homehub 3?
Many thanks.

FAQ
1. Best Effort Test: -provides background information.
Download Speed
0.13 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.13 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps
These were my test results for the bt wholesale test. The only settings I believe that I have changed is the username: from the bt users username to [email protected] and the sound regulation to united kingdom settings. I also tried the internet on both pppoe and pppoa with no change in results.

I/O Speed for the HP H221 Host Bus Adapter- Need IO/s or IOPS

Similar Messages

Maybe you are looking for