I off loaded my photos, the storage on the compute still shows 47GB of photos. When I go to IPhoto, it is empty and so is trash? Why is the storage still showing photos taking up space
I off loaded IPhoto pictures, deleted them from my Macbook Air and trash bin. The storage info under about this Mac still shows 47GB of photos, why? Where are they if I can't locate them. Thanks
What is the Other on my iPhone and How to Remove It
Also
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software
Similar Messages
-
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
when i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to show them as new emails. any suggestions?
1. Open iTunes.
2. Click the View option in the iTunes menu.
3. Select the Show Sidebar option.
Connect your phone, select it in the Sidebar...the various tabs will now show as before. -
How can I back up the iPhoto library when iPhoto won't open and I can't simply copy the iPhoto library packet because "some of the data canny be read from or written to"?
Regarding not being able to open iPhoto. As a test launch iPhoto with the Option key held down and create a new, test library. Were you able to create a new library?
If so then your current library is damaged and needs to be repaired.
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Wanted to sync up my new IPhone4, and thought that I should make sure I had the most up to date version of ITunes on my desktop first. Tried to get on site, and got an error message saying; "The folder ITunes is on a locked disk or you do not have write permissions for this folder." Cannot get on ITunes at all now. Help! Thx.
In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac
-
the ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help
Check the mute switch along the side, near the external volume controls.
-
When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?
It's normal behavior. You don't have to worry about. Most of what's listed is just a report of what the utility finds., not necessarily that there is omething wrong.
If you want to find out more, read the link below, or see the More Like This links on this page.
http://support.apple.com/kb/TS1448?viewlocale=en_US -
My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.
Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.
-
hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device
Google "iOS versions" and read the first match (Wikipedia)........
-
I use iWork Pages '09 to create my images. I normally drag and drop photos from iPhoto directly to Pages.
With iPhoto 9.4.3 I now get an error: " The media can't be used because you don't have access privileges or because it has no content or is corrupt". This doesn't happen with every photo from the same event and doesn't get corrected after running 'Repar Permissions'. I can Export to desktop then drag to Pages but that is stupid. What's up???With iPhoto 9.4.3 I now get an error: " The media can't be used because you don't have access privileges or because it has no content or is corrupt".
This looks like previews of some of your photos are missing or corrupted. Did you run a cleaning application, like "clean my mac" or move your iPhoto Library? Where do you store your iPhoto Library?
I'd try to repair the database or rebuild the iPhoto Library in addition to repairing permissions with the iPhoto Library First Aid Tools. Launch iPhoto with the command and options-key ⌥⌘ held down at the same time to get to the First Aid Tools.
Back up the iPhoto Library before you try rebuilding.
Regards
Léonie -
My baseball forum used to log in as soon as I open bookmark. Now must enter name password to log in. Exit page come back I have to log in again. None my user names passwords stay in the boxes or remain after logging out. I did not set the Permanent privacy mode and then I did set the Permanent mode and neither changes this. I have Accept cookies enabled. I have remember passwords checked. ???
Try clearing your Cookies for the affected websites. <br />
Tools > Options -> Privacy - Cookies = Show Cookies ''button'' <br />
Enter the domain in the Search bar at the top and all the Cookies for that URL will appear. Unless you can figure out which Cookie is for "remember me", you'll need to delete them all.
Hold the {Ctrl} key while you click on each Cookie in the small window. When that list is all highlighted, click the Remove Cookie ''button'' in the lower left. <br />
When you are done click Close.
If that problem persists, you might need to delete the __cookies.sqlite__ file in your Profile folder.
[http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile]
''You might need to unhide your "Hidden files and folders" thru Folder Options in the Windows Control Panel'' -
When I finiish using an app like urbanspoon and move on to somethingelse, does it automatically go off? If not, is there a way to turn it off to save on battery life? Thanks.
SteveI don't know what Urbanspoon does, but if it's not a GPS navigation, audio player or VOIP app, then when you switch to another app it is not running in the background or using battery - it is frozen in memory ready for when you switch back to it.
Only GPS apps, audio players and VOIP apps actually continue to run in the background when you switch away from them. Those types of apps should be obvious that you are using them.
Some other apps may finish completing a task when you switch away from them (such as uploading a photo, for example), and once finished are just frozen in memory.
If the phone needs to free up some memory to load a new app, the OS will do that automatically. It is not necessary to manually close apps. -
I have an Apple Wireless Mouse (model A1015 EMC No. 1938).
I metal "strip" fell out. I can not figure out how to put the strip back in.
Leaving it out, the mouse doesn't work (no light, no nothing).
Does the strip actually belong and if so, where does it go?
I went to the Apple site and looked up how to replace the batteries and started off saying to turn off the mouse. I have no idea how to turn off the mouse. It also did not show a metal strip on the inside.
When I opened the mouse, the battery cover popped off. Without the metal strip, the cover does not pop off and is very hard to remove.
HELP!!!See: https://discussions.apple.com/message/1958068#1958068
-
I'm still learning the whole Mac thing but these are great machines! I purchased a MacBook Air 13" and then thought I should also get a MacBook Air 11" for travel. When I set it up at the Apple store I told the assistant the exact same name for each machine, i.e., "my name and MacBook Air." What I want to do is go back in and rename both of them adding the 11" and 13" designation to the name so that when I set up Time Machine or whatever else I know exactly which machine is what. I'm sure it is very simple but I cannot seem to figure it out. Help please. Thanks.
Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt -
So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result. The file was originaly a 640x480 wmv file. Any suggestions?
I ended up figuring out a solution, but I'll get to that in a sec.
To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well). I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck. My impression from said experiments, and reading other discussions was that it was a corrupt file.
Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try. So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila!
So, who knows what that means in real terms, as for the whats and whys.
Maybe you are looking for
-
Hi Experts, I want to prepare a new custom report in which the PO number should appear. I was advised to use EKBE table. On checking I found that I can pass only Material doc# and Fiscal Year and No company code field is found. Is it reliable to use
-
Word 2013 (Windows 7 64-bit) - Embed PDF as Icon Error
We have a process where we embed PDFs into a table in a Word document as an icon. This worked for us in Word 2010, but as soon as we upgraded to Word 2013 we started getting an error message. "The program used to create this object is Package. That
-
To create a sort of "browse the pages" in a page with DWCS6: how?
Hello all again, as usual i'm here with something that for me seems impossible and maybe it's super easy... i checked online but i couldn't find any answer. I start with a description of what i want to accomplish: - i have 1 database (mySQL) with a t
-
How do you sync iCal on my iMac to my iPad?
How do you sync iCal on my iMac to my iPad?
-
Odi_creating variable- values through a query
hi, i am using odi 11g. I create a variable pkg_variable. And going to the refreshing tab ,i gave the logical schema. i give a query "select #pkg_variable from dual".there is an error saying" invalid character" what am i supposed to do. What would be