I often HIT SOMETHING that makes my font very small when composing a message on hotmail and stuggle to get back to normal READING size....any help???
always happens on my laptop........my font is so small on hotmail at the moment i can't read it
'''{ Ctrl + 0 }''' ''<-- that's a zero''
See this:
https://support.mozilla.com/en-US/kb/Page+Zoom
Similar Messages
-
i cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me
Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? Then you've stolen Apple's software and will receive absolutely no assistance from this forum. Enjoy your iBrick! -
Cannot change font from italics when composing a message
Have tried changing fonts, changing from italics to bold, would reinstalling help? If so what is the procedure to save contacts and info? Reasonably proficient on the computer but no expert by any means. Thanks for any help.
''hughes251 [[#question-1046486|said]]''
<blockquote>
Have tried changing fonts, changing from italics to bold, would reinstalling help? If so what is the procedure to save contacts and info? Reasonably proficient on the computer but no expert by any means. Thanks for any help.
</blockquote> -
The browser will not go on line it says that there is an error ...
Try SMC reset:
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. (four keys together)
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
I download Adobe Flash but it doesn't install. Each time I encounter something that needs Adobe Flash it tells me I don't have it. I am getting tired downloading it and then it isn't there.
install_flash_player_10_osx.dmg
install_flash_player_10_osx-1.dmg
install_flash_player_10_osx-2.dmg
install_flash_player_10_osx-3.dmg
install_flash_player_10_osx-4.dmg
etc to -9
Those are the ones you downloaded. Ten times, apparently. Since install_flash_player_10_osx.dmg already existed, the next download was appended with -1. The next -2, etc. They'll all be identical, so it doesn't matter which one you use. Though I'd go with the last one as it may be a slightly updated version from the first download, depending on how long ago you did the first one.
A .dmg file is a Disk Image. When you double click them, they open up a pseudo drive on the desktop. When you open one of these ten items, the Flash installer will appear in a file window. Run it to install Flash. Then close the file window (displaying from the psuedo drive) and then put the "drive" in the trash to dismount it. You can then delete all of those.
Looks like you also downloaded the Adobe Reader twice. Versions 10.1.2 and 10.1.3. Also Skype, whatever the Thomson thing is, and an unnecessary Flash uninstaller (the Flash installer will put an uninstaller in the Utilities folder). -
I opened something that won't seem to quit. Command Q is not working and nothing else will. What could I do to quit?
Nevermind! I right-clicked on the application and clicked force quit and it worked! That's all I had to do!
-
How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.
First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?
Hi Roger:
Thanks for the reply. I think I figured out the problem. Apple has confused (at least in my mind) the different IDs that people can have. In the iCloud settings, they use the term Apple ID and not iCloud ID. I guess there really is no such thing as an iCloud ID. There are Apple IDs with various attributes. This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
One other question - why does the syncing of Notes using iCloud require an @me.com email account. That makes no sense to me.
Thanks for your help!
AO -
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
Nah - that's just the normal boot process.
Clinton -
When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?
Hi
chorleyman wrote:
you do have to actually define the area to be bounced in the dialogue window that comes up - there are some discrepencies in the way that the program behaves like that,
Apart from the "Include Audio Tail" function, which can leave Logic bouncing for a very, very long time, there are generally, no discrepancies regarding the Bounce Locators:
If Cycle is enabled, the bounce locators will be set to the cycle locators.
If Cycle is off, and regions are selected, the bounce locators will be set to the selection.
If cycle is off, and no regions are selected, the bounce locators will be set from the Project Start to the project end.
It is smart to actually check that the bounce locators are set where you would like them to be.
wildfire31 wrote:
When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop
If you get caught with a bounce that does not stop, Command . (period) should do the trick.
CCT -
How do you add pictograph favorites to font selection when composing mail messages?
I located the desired symbols from the "Characters" selection when I chose the Format menu and opened the gear symbol on the bottom lefthand of the pulldown menu. Now I do not understand how to place these "Favorite" symbols I identified placed into my Font selection for easy access or use when composing mail messages.
Hi skrug1967!
I have an article for you that I believe can address this question for you:
OS X Mountain Lion: Enter special characters and symbols
http://support.apple.com/kb/PH10758
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!
Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.
-
I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?
On your phone (from http://support.apple.com/kb/ht1311):
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information. -
Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid
Try a new post in the 10.5 Installation forum.
DALE
Maybe you are looking for
-
Query Needs to be changed to only use 1 Table
I would appreciate some help with changing this query to only use the table "ain.impl_oh_order_header oh table" SELECT oh1.partner "Dealer", od.sales_code "Dealer Sales Code", oh1. external_order_number "Original Dealer Order Number", oh1.region, cus
-
Ipod shuffle with integrated cable?!?
My son came home from school with what to all appearances is a 2nd gen ipod shuffle (bought from a friend that upgraded to the standard ipod). The only problem is that this shuffle has a 36"cable coming out of the side opposite the headphone jack. I
-
How to relate the Fixed Asset module to Purchase Order?
Hello experts, Good day! How can I relate the fixed assets to purchase order? Is there a ways, so that we can't create different item code for purchase cycle and fixed asset module... 2nd, how to Increase the net value of fixed assets ( vehicle, mac
-
Templates Not Working - Layouts Missing
I have several Templates with Layouts. Almost all of the templates work well when a new meeting is created from them. However, one of the templates seems to fail when a new meeting is created from it. I get a blank layout with a single Notes pod, wi
-
Exception when using the Multiple Tables
When I tried to follow through the most recent TopLink tutorial project, I got the following exception if I tried to create a new employee record, although I can view or/and update the salary value from an employee object without any problem. Excepti