I only get sound ....but no video

I have just a apple tv for my birthday.Anytime I try to watch a video from my ipad2, I get good sound but no video(picture).

Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

Similar Messages

  • I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    Welcome to the Apple Community.
    Your phone doesn't do mirroring, only the 4S will do that. It only does basic AirPlay.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • Does anyone know why I can only get sound and no video with a compatible component cable?

    Does anyone know why I can only get sound and no video with a compatible component cable?

    What apps are you trying?  TV out video only works with apps that support TV out.  If the app does not support TV out you will still get aoudio via the component cable

  • I get sound but no video with 5G iPOD

    Just bought my daughter a 5g iPod - she bought a number of vidoes through iTunes - the loaded OK onto the iPOod - when you go to play them - you hear the sound - but no video. Have done the 5Rs - no change - what it next? Thanks.
    Lou

    Welcome To Apple Discussions!
    You should try as Barbera Hall suggested. Then you should update your iPod(thats if you havent already)to version 1.1.1

  • I only get sound on my "video" why is it only playing sound?

    I have Premier elements13
    I follow all the instructions to the  point. when I Publish+share to computer it creates an MPEG file, it plays the sound but no picture/video? What am I missing?

    runelarneng
    Sorry for the delayed reply. I must have lost track of your thread.
    What are you using as your player? Windows 8 and 8.1 are known to have Windows Media Player MPEG2 issues. Microsoft issue. In this regard, can you download and install the VLC player and get video as well as audio playback with it?
    VideoLAN - Official page for VLC media player, the Open Source video framework!
    Typical drill type considerations....depending to your reply to the above.
    Since you present your issue as no video, it is important to assure that you video card/graphics card (in spite of its superior attributes) has a driver version that is up to date. So, please confirm that at the web site of the manufacturer of the card.
    Your GoPro video was probably AVCHD or H.264.mp4 and apparently has undergone conversion since you refer to your present source media .mp4 and .avi as "originally" GoPro recording. Please download and install the free codec utility named GSpot to confirm the video properties, specifically Video Name, Codec, and Status as well as Audio Name and Status.
    GSpot Codec Information Appliance
    Please confirm if you have video in previewing the Timeline content before export.
    You say that your MPEG export (Publish+Share/Computer/MPEG has no video. However, you say that you have the latest version of QuickTime installed on your computer. Please go to Publish+Share/Computer/QuickTime and let me know if you find QuickTime presets in the Presets list.
    Please review and consider the above and then we can decide what next.
    Thank you.
    ATR

  • HT204291 I cannot stream amazon prime to my tv? I can get sound but no video.

    I am using my iPad and cannot stream amazon prime to the tv?
    The sound comes thru but no video!

    Welcome to the Apple Community.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
    Amazon have blocked both basic AirPlay and mirroring.

  • I get sound but no video with imported files

    I used an HD camcorder and uploaded the video onto a computer using final cut pro then moved the original .mov files to my computer to edit it at home. After importing the files into Final Cut Express 4 project, when I play the files there's a white screen and no video but I do still get the audio. If I put anything into the timeline the playback is a red screen that says "Codec could no be opened".

    What format specifically is the media you captured in FCP? Most likely it's in a codec that's not available to FCE. If so you'll have to convert the media to the Apple Intermediate Codec in Final Cut Pro or Compressor.

  • Cannot play .cdr files.  I get sound, but no video.

    I have successfully copied a DVD to the MacintoshHD.  It mounts, and I have followed the instructions here to have the .cdr file play in DVD Player (https://discussions.apple.com/thread/1844704?start=0&tstart=0).  When the DVD plays, there is no video, only sound.

    http://download.cnet.com/CDRViewer/3000-2191_4-75859892.html

  • Is anyone else had a problem with the hdmi mirroring with the new Ios5 update? I'm getting sound but no video. It was working fine before.

    Help with this please. AFter updating to IOS5 I can no longer mirror my Ipad2 with the Apple hdmi av adapter.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Airplay only sound but no video

    I have iPad Air.  AirPlay has suddenly stopped working properly, now only getting sound but no video.  How to fix and what is the cause of this problem?  Please help!

    Hi emak821,
    If you are having an issue with AirPlay not functioning fully from your iPad, I would suggest that you troubleshoot using the steps in this article - 
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • AVI Files, Sound but No Video

    I have searched the forums but could not find the answer.  I have a slightly tricky situation.
    I have old AVI files on my hard drive captured from a Sony D8 camcorder.  I used PE (version 2 I believe) to capture them.  This was a couple of years ago.  I have around 30 tapes and captured all the material from all of the tapes (around 700GB).  I then inlayed the date and time stamp on all the clips using DV Date (an excellent utility).  The initial enthusiasm of editing and converting them to DVD's stopped after the first couple of projects ;-)
    Fast forward 2 years, when I tried to play the clips, I only get sound and no video (Windows media player, NERO, WinAmp etc.), with one exception, the VLC player.  When I get the clips into PE, they work fine!  The DV date utility also cannot open the files. It says, only audio stream found and no video stream.
    I tried VirtualDub.  It plays them without any errors.  I then saved them and tried to play with other players.  Same problem.  Previously every player was playing them fine and now they don't.  I am terrified by the idea of re-importing from all the tapes and re-inlaying them with date and time.
    What I did between the time they played fine and now was to back-up all the files onto another hard drive and defragment the first hard drive (I am still using the same computer to do all this).  Files have the same problem from either drive.
    Bottom line, the clips work fine within PE but sound with no video on the media players.
    Any ideas?
    Thanks a lot.

    Bill,
    Just wanted to post a follow-up on my problem for the benefit of others.
    I thought all my files are corrupt and decided to capture them again.  When I hooked up my Sony D8 camcorder (using FireWire) I had problems again!  PrE said "Can't Activate Recorder.  Try Resetting Camcorder".
    Tried Windows Movie Maker and that gave me a rather helpful (not!) "an unknown error occurred".  Back to my troubleshooting again and found a post somewhere on Adobe forums about "regsvr32 qdv.dll" . [Start -> Run and type regsvr32 qdv.dll (there is a space between 2 and q)].  I did that and all of my old files started working! Windows media player now plays them fine.  GSpot now says everything is good. I have attached the GSpot output below.
    Now the bad news.  When I import media files into PrE, there is no audio!  Windows media player still plays them fine.
    After re-registered the qdv.dll, I had problem with audio but re-starting the PC fixed it.
    Now, back to audio troubleshooting in PrE!  I will post an update if I am successful.
    Thanks.

  • Sound, but no video when streaming a quicktime file through shockwave

    When I stream a quicktime movie in the html file hosted on localhost using the Apache server, I get sound but no video. I saved the quicktime movie as part of my cast, linked to http://localhost/~username/mymovie.mov 
    When I play the quicktime movie itself in my browser, or in a projector, or just within director, the video and sound play simultaneously. But in the browser after converting the dir movie to a dcr and html file, and hosting the dcr and html files on the server, when I open the html file in my browser, only the sound plays. Anyone else encounter similar problems? Any help would be appreciated!

    Hi guys,
    here's some quick notes on how I handle shockwave videos with my projects.
    I tend to find that .swf format videos work best under all browsers using shockwave
    easiest way:
    you can do a standard import of a .swf  video straight into a your cast. (not linked)
    the problem with this is it tends to create a large dcr file for you users to download
    'preloadnetthing' way:
    upload your videos to a url location - something like  www.mywebsite.com/the_programs_title/dsmedia/videos/video1.swf
    (I never use capital letters or spaces)
    file - import - internet - <enter the full url pathname to the file>
    this will add the file to the add list
    set media to : Link to External File (Don't use Standard Import)
    now press Import
    at this point Director will try to connect to your url - and do a trial download of the linked file
    if it works you should now see a new linked video cast member added to your cast
    if it fails - (which mine tend to do half the time?) - try it again until it works.
    Here I normally view the linked videos property inspector - and change its settings - I turn loop off - and make sure preload is not set.
    now comes the code part
    To get your videos to play correctly, you will need to preload them into memory, before you play them.
    (although it's possible to stream videos - I've never been able to get this to work well - there is a whole bunch of lingo code to deal with streaming videos)
    *** a frame script for preloading a swf video ***
    on beginSprite
      floatPrecision = 2
      tellStreamStatus(TRUE)
      global gVideosName
      set TEMP to "http://www.mywebsite.com/my_program/dswmedia/videos/" & gVideosName & ".swf"
      global mynetID
      set mynetID = preloadNetThing(TEMP)
      set the text of cast "preload_results" to "0 %"
    end beginSprite
    on exitFrame
      floatPrecision = 2
      global mynetID
      pStatList = getStreamStatus(mynetID)
      if (pStatList.bytesSoFar > 0) then
        pPercentDone = (pStatList.bytesSoFar * 100) / pStatList.bytesTotal
        if pPercentDone > 99 then go NEXT
      end if
      set the text of cast "preload_results" to ((the string of pPercentDone) & " %")
      go loop
    end exitFrame
    *** a frame script for playing a swf video ***
    on beginSprite
    -- I create a blank 'place holder' cast member (a black filled rectangle) the same size as my video, on to my stage - into sprite 1
      set the visible of sprite 1 to TRUE
      set the puppet of sprite 1 to TRUE
      global gVideosName -- REM the name of my linked video cast member
      set the castNum of sprite 1 to cast gVideoName
      updateStage
      sprite(1).play()
      updateStage
    end beginSprite
    on mouseDown
      sprite(1).stop() -- This stops the SWF movie playing !!!
    end mouseDown
    on keyDown
      sprite(1).stop() -- This stops the SWF movie playing !!!
    end keyDown
    on exitFrame
        if sprite(1).playing = false then
           set the puppet of sprite 1 to FALSE
           go to "somewhere" -- REM somewhere you want to go to after the video have finished.
           abort
        end if
      go loop
    end exitFrame

  • MPEG2 Sound but NO Video on playback

    I have QT Pro w/the MPEG2 Plug in (both current version) running on OSX 10.4.11 and when I try to open/play a file I get sound but no video. The file works fine with VLP and if I use Handbrake to encode the file in MPEG4 it will play. Why doesn't the MPEG2 file play? That's why I bought the plug in... Is there some other magic that needs to be done?

    I looked at the encoding and it was MPEG so now at least I understand the QT not playing part. Yes the original file was from TIVO downloaded via TiveDecode Manager. I was hoping not to have to do any more encoding to get it to play in QT (want to use a Mac Mini as a Media Center). Using Handbrake I can encode to MPEG4 which does play just fine, it just can take hours to encode. If anyone knows of a better way please let me know. I know on solution is to use VLP as the player but it's not supported in Front Row (from what I can see). Thanks for the help Matti..

  • Airplay issue: Sound but no video

    Trying to use Airplay to watch Showtime Anytime. Able to get sound but no video.

    Hi emak821,
    If you are having an issue with AirPlay not functioning fully from your iPad, I would suggest that you troubleshoot using the steps in this article - 
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Sound but no video in quicktime 7.2

    When I'm on the web trying to view something in Quicktime, I get sound but no video. It was working fine and one day it stopped working. I did download a few plug-ins that may or may not have coincided with this problem. The plug-ins are: mp4vEncoder and Perian.

    Did you repair permissions & restart after installing those 2 apps? If so, then try Flip4Mac and/or VLC Media Player.
    Otherwise, please post the link/URL of the site(s) you are trying to use.
    Thank you
    Message was edited by: Baby Boomer (USofA)

Maybe you are looking for