I only want music how do i expand my music to take more than the alloted am

i have a 16 g nano it sayes its full but i only have 700 tunes can i override settings to allow all mucic

Ignore him, he's an immature kid here who thinks he is much smarter than he is.
There are no settings to override to allow all music, just don't click the boxes to sync any photos and they will not load, if that is your problem.
But it sounds like your music was ripped at a high bit rate. Either use the feature to convert your music to 128 AAC when syncing, or rerip your music.
Right click on one of these songs in iTunes, left click on Get Info and then post here the "Kind" and
"Bitrate". Also the file size from the listing in your library.

Similar Messages

How we will know that dimension size is more than the fact table size?

how we will know that dimension size is more than the fact table size?

Hi,
Let us assume that we are going to take Division and distribution channel in a dimension and assume we have 20 distinct values for Division in R/3 and 30 Distinct values for Distribution channel .So Maximum, we can get 20 * 30 records in dimension table and we can take rough estimation of records in the cube by observing the raw data in source system.
With rgds,
Anil Kumar Sharma .P

How do I store and access while traveling more than the last 1000 photos using iOS

I would like to store 2 or 3000 photos (unlimited would be even better) that I can search thumbnails and access anytime anywhere without using the GB's on my IOS device for that storage. iPhone and/or iPad devices. iCloud stores the last 1000,,, not sufficient for me. I have iPhoto on my Macbook and a Mac Mini where I store the photos at home. Fee free is highly desired. Thanks for any help you can provide.

Have you tried Dropbox?
https://www.dropbox.com/tour
You can store your photo files in the "pictures" folder and access them from anywhere.
I have iPhoto on my Macbook
Do you take your MacBook with you, when you are travelling? Then the MacBook and a small external drive for backing up the photos should suffice.

Is there anyone who can help me to contact the apple customer service? Because i want to know why they are diducted mt credit card more than the amount which is written on there apple store price? They are taken more!

Why the apple store taken more amount more than the amount written on their prices? Is there any one who can help me to contact the apple customer services. Thanks!

Some country's might not include tax in their prices, and if you changed or added your credit card details whilst making the purchase then a small temporary holding charge may also have been placed - in which case that should disappear within a few days (http://support.apple.com/kb/HT3702). Some apps also then allow you to make in-app purchases (though you can disable that via Settings > General > Restrictions)

How to proportionally scale one side of a photo more than the other?

Does anyone have any suggestions as to how to scale one side of an image more than the other? I've tried Content-Aware scale but it always yields ugly results. Any help is greatly appreciated.
Peter

Hi Peter
I thik the main problem is the amount of the side of the column showing is making the right column appear larger.
I would therefore suggest moving part of the right side of the image slightly to the left.
You need to be careful in distorting the image as it will show up in the perspective on the floor.

I have an old 4GB Ipod nano and an I-Phone 4S. I only want music to sync to my I-Pod without all the apps from the phone. Can someone tell me how to do this please?

I'm updating the music in my I-Tunes. I have an old 4GB Nano but I also have an I-Phone 4S. I only want music and nothin else on my I-Pod, how can I get it to sync without all the apps as, obviously the I-pod doesn't have enough memory?

"Other" is data that the iPod doesn't know how to deal with (but on your nano, it isn't Apps). All iPods have some quantity of "Other" on them. Sometimes Other is corrupt files that cannot be read.
The usual remedy when the quantity of Other becomes too big, is to Restore the iPod. However, 0.26GB of Other doesn't appear to be very much and I suspect you won't see much change, if any, if you Restore.

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

I don't load music, only audio books. When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2 are named 1a, 1b, etc.) , so when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

I don't load music, only audio books. When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2 are named 1a, 1b, etc.) , so when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

See this page from another forum member turingtest2. He might even chime in here if he sees it to offer any additional advice.
Audiobooks on iPods
B-rock

How to build an EVDRE input schedule with more than 3 dimensions?

Hello experts,
can anybody tell me, how to build an EVDRE input schedule with more than 3 dimensions?
How must the parameter configuration (expansion 1, 2, 3, 4) and range configuration (ColKeyRange, RowKeyRange, PageKeyRange) look like? If anybody could post an example, how such an input schedule could look like, I would be very thankful.
Best regards,
Stefan

Well, posting an example might be quite difficult. But there is no right-or-wrong approach. Since Inputs are made at the lowest or base level members of all dimensions, the key is to determine which dimensions you want in your expansion, to be able to gather the input. Otherwise, you may only need a couple of nested dimensions. But if you open BPC for Excel, open a blank workbook and in any cell type [ =EVDRE() ], then press refresh, the DRE wizard will allow you to select your nested row and columns for the report, and then build a basic report for your foundation.
I personally like to NOT expand my columns, and only nest 2 or 3 row member sets, depending on the details we need for input. SOmetimes, the whole input schedule is without any expansions, and just refreshes based on the CV changes, such as entity, category, time etc.
If you need more details, keep posting what you are trying to accomplish and we will try to help.

How can I use my iPod nano on more than one computer?

How can I use my iPod nano on more than one computer?

Hi, China6450.
Thank you for visiting Apple Support Communities.
I would recommend setting up Manually manage music. This will only allow music to be synced from the computer to the iPod nano. Here are some helpful articles that will walk you through the process.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/HT1202
Cheers,
Jason H.

How to add a graphic watermark that is bigger than the photo?

How to add a graphic watermark that is bigger than the photo?
     Basically I want to add a watermark that is a border, like "outside stroke" so that it doesn't clip the photo.
     Upper, left and right side are 10px and on the bottom is my signature that is 40px high. I know how to do this in Photoshop, but can't figgure it out in Lightroom.
     The inset function with negative numbers doesn't work, because it only export to the size of the exported image, instead it should resize the image with those 10px up, left and right and 40px on      the bottom.
My bordes look like this either one of the two can be used, and if you scroll down you will se how the end result should look like.
And below is what it should look like, so that Lightroom doesn't clip the photo.

Are you sure the focus of your piano roll is on the right track? Are you zoomed in/out enough?

How to make an indicator takes more than one input

Hello,
I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
Thanks in advance,

YES, you got it right Coastal !
This is what i want to do,
I dont know how to establish this output in the software, i am still learning LabVIEW.
I put a merge block to join the outputs but it didnt work.
check it in the attached VI file.
I am sure it is an easy thing but I dont know how to implement it.
Any help you provide is appreciated,
Best wishes

Delete a template in pages also how to delete a page if you have more than one

Hi how do you delete a template from pages,also if you have more than one page and you only want one how do you delete the other page.

You have to navigate to the My Templates folder in the Application Support folder in your System Library which is hidden by default in OSX 10.7.5. Hold down the option key when you click on the Go menu in Finder and all will be revealed.
A page only exists because it has content on it, even if that is an invisible like a space, tab, return or page break. Click on the page you want to clear and delete the content.
Menu > View > Show Layout/Invisibles
to see what is there.
Peter

Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
Zayed

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

I only want music how do i expand my music to take more than the alloted am

Similar Messages

Maybe you are looking for