I only want sync SOME videos, not all, is there a way to do it ?

Hello guys!
I want to sync only SOME videos, not ALL... is there a way to do it ? i tryed to did a "smart folder" with iPhoto, for select last 6 months videos, but when i try to sync to iPhone, it doesn't sync none video, the only way is selecting "incude videos" (but i wont want to, because it will sync ALL videos, i only want some of them)
Thanks!
System:
Yosemite
iTunes 12

Hi,
Unfortunately this feature is not included in Firefox at this point, but you can suggest it by following the instructions below.
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.
Hope this helps!
Curtis

Similar Messages

LV 8.6: programatically pressing button only works in some VIs, not all?

Setup is an old labview 8.6
I'm tasked with fixing some strange old engine test bench which has a ~1E-6 measurement drift.
The "easiest" work around fix would be to run the mechanics to a bottom end point then press the "reset" measurement button automatically.
!!: A "drive" vi and a "measurement" vi has to be running at the same time. The drive vi will then periodically drive the test bench to a mechanical end point and reset the measurement vi. This would get rid of the drift.
!!: Both vi's must be started manually and running. I cannot start one vi from the other. It messes things up. I know not why. There seems to be some strange dependency over compiled FPGA code somewhere.
I'm no lab view wizard. It was 20 years since I touched it last.
So digging through examples on how to press a button in one VI from another VI I found this:
https://decibel.ni.com/content/docs/DOC-15962
Which I built into a sub-vi and a test setup to see if I could make it work on the test bench. With some tweaking it works.
A test "master" vi can press any button in a test "slave" vi.
However. It is impossible to press the "reset" button in the "measurement" vi.
Labview reports no errors, it just doesn't execute the value change event as far as I can understand.
In fact, I can copy exactly the same code from the working "slave" vi into the "measurement" vi and it stops working. !!??
How can code work perfectly well in one vi but not in another ?
The "measurement" vi has some sort of compilation requirements, meaning any change to the vi takes >30min to "compile" before it can be run. Can this have something to do with why remote button pressing doesn't work?
It also interfaces with some FPGA somewhere, can that have something to do with it ?
I have no clue. Happy for any help here.

Here it comes -- WARNING -- ugly code, this is my first labview in 20 years and I'm very short on time.
press-button.vi
the sub vi I mangle up from the example (https://decibel.ni.com/content/docs/DOC-15962)
master.vi
the test event sender
slave.vi
the test event receiver
measurement.vi
the real vi, where no buttons can be pressed
In master.vi you can reconfigure the input to press-button to which vi and button to target. Right now it is set for the test slave vi (I think) to verify that it actually works as intended in the test environment.
Hmm, seems there is a limit to 3 attachments, will post the measurement.vi in next post
Attachments:
press-button.vi ‏15 KB
master.vi ‏19 KB
slave.vi ‏29 KB

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

I have tried to sync my Iphone with my current Itunes and for some reason not all of my music is transferring to my Iphone. Some songs that were on my phone previously, are now not transferring. Any ideas?

I have downloaded all of the recent upgrades for both Itunes and Iphone. Now for some reason, not all of my songs in my playlists are transferring when I sync. Previously I have had the songs in the playlists on my phone, but now some of them are not there although they are listed and show in Itunes. Any ideas?

iTunes will only copy back iTunes purchased music. If you don't still have a copy of the music that you copied from CDs or bought from other stores anywhere (e.g. on another computer or on your backup of your library) then there are some third-party programs listed half-way this page which should be able to copy them back : Recover your iTunes library from your iPod or iOS device.

How do I export pictures from my IMac to my iPad. I have only certain albums I want to export and not all my albums?

How do I export pictures from my IMac to my iPad. I have only certain albums I want to export and not all my albums?

You can select only the albums that you want to sync in the photos tab of iTunes when you sync your iPad. If you are using iPhoto it is very easy. Simply select iPhoto in the Sync Photos From heading and then select the albums that you want to sync.
If you are using iTunes 11 - enable the side bar by going to View>Show Sidebar from the iTunes Menu. This explains how to sync photos.
iOS and iPod: Syncing photos using iTunes - Apple - Support

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing

I am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.

i am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.
aman

Are you using Windows...?

I am trying to sync some videos on to my iPad. I have tried .avi, .mp4, .mpeg, .mpeg4 and .flv formats but my iPad is not getting synced. What shall I do?

I am trying to sync some videos on to my iPad. I have tried .avi, .mp4, .mpeg, .mpeg4 and .flv formats but my iPad is not getting synced. What shall I do?

Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

I preordered an album and i only got some songs not all, what happened

i preordered an album and i only got some songs not all, what happened??

What do you mean 'only got some songs not all' ?
Has the album now been released ? If it is has and you've paid for it (you aren't charged when you pre-order an item, only when it's released) then you should be able to download the complete e.g. via the Purchased tab in the iTunes store app on your phone, or the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes.

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Syncing my Videos (not "Movies") onto my iPhone 4

Hey guys,
I would like to sync some video's i have on my computer onto my iPhone (just as everyone does with their "Photos"). When i plug my iPhone into my computer, in iTunes click on my iPhone, then select the "Photos" tab. I've currently got a couple of folders of photos selected (but the checkbox for the "All Folders" is NOT selected). I would like to keep those certain photo folders checked to keep on my iPhone, but i would ALSO like to add some videos i have in my "Movies" folder. My question is, how do i add another root folder to sync my Videos to my phone in iTunes? Any help would be greatly appreciated. Thank you

First you need to have Include Videos selected under the Photos tab for your iPhone sync preferences with iTunes.
If you use iPhoto and the videos are in your iPhoto library, you can create an iPhoto album for the videos and select the album under the Albums section followed by a sync.
If you manually manage photo storage, the folder of videos you want transferred to your iPhone must be selected.

I reinstalled my computer's operating system. How do I transfer music from my Ipod to my music library? It transfered some, but not all my music. I authorized the computer, but it did not help.

I reinstalled my computer's operating system. How do I transfer music from my Ipod to my music library? It transfered some, but not all my music. I authorized the computer, but it did not help.

The sync is one way - computer to ipod. The only exception is itunes purchases.
The ipod is not a backup device.
You need to copy everything back using your backup copy.

Aperture has stopped showing some, but not all, keywords on photos

I imported some new photos today and noticed that Aperture seems to have stopped displaying some, but not all, of my keywords. I'm noticing this on a large number of my existing photos.
For example, I've selected a photo and the Keywords tab of the Metadata pane lists: Amanda, iPhoto Original, Judy, and Zoo. That appears to be correct. However, the Keywords field in the top of the Metadata pane only shows iPhoto Original, and the only keyword displayed in the grid view is iPhoto Original.
Switching to a different metadata display does not help, nor does rebuilding the library. Reassigning the keywords seems to help, but that's not really an option for > 7,000 photos.
Anyone know why this is happening? Can I fix this?
Dave
PowerMac Dual G5 2.0 Mac OS X (10.4.7) Aperture 1.1.2

After poking around with BBEdit in my Aperture library, I think I see the problem. I chose a photo that Aperture won't display all the keywords and re-added them. I then compared all the files in the library for that photo with the same files in a backup library I had set aside.
It appears that at some point Aperture got the IPTC keywords out of sync with the actual keywords on the photos. Looking at the Version-1.apversion file (which is actually a .plist file), I can see that both copies have the same keywords on them (called tags in the plist), but the IPTCProperties.keywords summary does not reflect all the tags actually on the photo. Aperture appears to just display the keywords stored in the IPTC keyword summary instead of checking to see what keywords the photo actually has.
So, the keywords are still there, but the summary that Aperture displays is wrong and a library rebuild doesn't appear to rebuild the keyword summary.
My options at this point appear to be either re-apply all my keywords or write a tool to fix it for me (I guess being a developer has it's perks). I'll definitely be filing a bug on this...

TS1424 Some but not all of my purchases from iTunes store (TV shows) have been downloading in a Quicktime format that can't be viewed via iTunes or on apple TV (1st gen). I get error message when I try to convert.

Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes. In some but not all cases, I right click "open in" and select iTunes and then it will play. However, this doesn't always work. When I open in Quicktime and try to export to iTunes, that won't work. When I try Wundershare's Video conversation program, it won't even accept the file. What's going on here? Any ideas? Please reply [email protected] with any suggestions.
Kathy

Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan

Finder shows some but not all files in a folder

In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname> staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1239425731.tmp
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1240072173.tmp
-rw-r--r--@ 1 myname staff    52796 13 Feb 11:08 safe1.xlk
-rw-r--r--@ 1 myname staff    95320 12 Mar 16:06 safe2.xlk
I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
     defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

I only want sync SOME videos, not all, is there a way to do it ?

Similar Messages

Maybe you are looking for