I opened a new project with the same name as an existing project and it deleted my existing

Bad day on my part. I spent all day recording a song with Garageband. As I finished it, I exported it to iTunes (Thank God), closed garage band and listened to the song. Hearing that it had several seconds at the beginning that were silence and not edited out I opened a new Garageband project under the same project name as the previous one and it erased everything the previous project had. Leaving me with no file. No project. No memory of the initial project. Any clues or am I SOL?

SchilbAaron wrote:
I opened a new Garageband project under the same project name as the previous one
the OS should have asked if you wanted to replace the old file with this one. if it did not, perhaps you saved this file in a different folder and the old one still exists? You could try a spotlight search on your entire hard drive to see if both files exist.
if you did replace the old with the new, the only real hope is that you have a backup (perhaps you use Time Machine?)
SchilbAaron wrote:
Hearing that it had several seconds at the beginning that were silence and not edited out[...] am I SOL?
if that's the _only_ issue, not completely out of luck. you could drop the audio file back into a new GB project and export an exact length:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)
Note: if you compressed the export (mp3/acc) you'll be double compressing the file and losing a lot of musical information, but it may be better than losing a One-Time piece of work.
an alternate method would be to use an Audio Editor to cut out the silence. i'm not sure that this would save any quality, i think you'll still be double compressing the file, but it's something else to try, and listen to, to make a decision on which is better:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

How can I open a new window with the same website like the one I have open?

In safari I can open a new window with the same website like the one I have open, that makes it easy continuing to navigate on a website and to go back to the original website

Hello Andieas
Why open a new window for fast browsing??
Open new tabs.
Just right click on what you want to open and click "Open in new Tab"
It is easy and doesn't consume memory from your computer as well as easy to navigate.
Hope you'll like it

How to open a new tab with the same current directory in a terminal?

I use the following script to open a new terminal with the same pwd.
I'm wondering how to modify it to open a new tab with the same pwd.
#!/bin/sh
# Open a new terminal in the cwd
CWD=`pwd`
osascript<<END
set thePath to "$CWD"
set myPath to (POSIX file thePath as alias)
try
tell application "Terminal"
activate
do script with command "cd \"" & thePath & "\""
end tell
end try
END

bit of a hack, but the make command doesn't seem to work for tabs in terminal. replace what's currently in the 'try' block with this code:
tell application "Terminal" to activate
tell application "System Events"
tell process "Terminal"
keystroke "t" using command down
end tell
end tell
tell application "Terminal"
do script "cd " & (quoted form of thePath) in last tab of window 1
end tell

I forgot the answer to the security questions and i forgot the email i put there to resend the link so i can change it. i want to close my apple ID and open a new one with the same email could i?

i forgot the answer to the security questions and i forgot the email i put there to resend the link so i can change it. i want to close my apple ID and open a new one with the same email could i?

i live in saudi arabia and i tried calling them and letting them call me but they said that it is unable to my country. ***** i don't know what to do!

How do I move databases to a new volume with the same name?

When I first set up Snow Leopard Server, I chose a different volume to keep the databases such as mail, iCal, etc., during the setup program.
I'm running out of space on that volume, so I installed a new hard drive with the same volume name and copied all the files over to it, but when I restarted the server I started getting error messages and no one could send mail. I'm assuming it's a permissions thing.
So I do I move everything to a new volume?

- I logged out as Administrator, and logged back in as Root.
- Disconnected the services in Server Admin.
- Copied the ServiceData folder from old volume "Storage" to new volume "Storage".
- Unmounted old volume "Storage".
- Restarted all services.
Dec 5 12:58:49 companyname dovecot[65]: IMAP(*): stat(/Volumes/Storage/ServiceData/Mail/17D8D54B-0529-4BD6-8467-757C3EA7C75B/tmp ) failed: Permission denied (euid=1025(username) egid=20(staff) UNIX perms seem ok, ACL problem?)
Mail, Web, iChat and Address Book servers do not work.
What do I do now?

My Google preferences are set to show search results in a new window. However, when I do a Google search, it Firefox always opens 2 new windows with the (same) results. How can I fix this?

I did not change my Google settings. I always have had it set to open search results in a new window. Some time ago, it started opening up two windows that have identical url/content.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can you remove old conversations from the iMac. Even when I remove them they return when I start a new conversation with the same person. Only happens on iMac with the Beta iMessage program

How do you remove an old conversation using the Beta iMessage on an iMac. When I open a new conversation with the same person the old conversation comes back

Hi,
Previously iChat had tried a Last Chat/IM option when using Saved Transcripts - which itself was an option.
iChat has also tried "Saving" the Last Chat by leaving a Chat window open and using something similar to the Lion method of showing an app in the state is was closed in.
In Messages the option to Save Transcripts has been removed and Chats or all types are saved as a matter of course.
What this tends to mean for your iChat style Buddy Chats is that it opens all the Transcripts for that buddy as a sort of History you can scroll back through if you want (I have some Buddies with saved chats gong back to 2004)
With the Syncing of iMessages with iPhones and iPads (or Touches) then it seems this works slightly differently.
Although you can delete the chat and the contents of the Chat as separate action it is true that in the Beta as soon as you connect to the same Contact that the contents of the previous chats are shown to you.
I have found that Messages stores a data base of info on iMessages in Your Home Folder/Library/Messages
I have found that deleting this chat-db removes the "History" that keep popping up.
By default the Saved "iChats" are also stored in the Home Folder/Documents/iChats (At least this is the default place iChat used and they go to the same iChats folder where ever you had it)
Some people claim removing iMessages saved here stops the "History" reappearing.
In Lion the only access to the Home Folder/Library is via the Finder's Go Menu and hiding down the ALT key
10:00 PM Sunday; June 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I search for something, firefox opens a new tab with the results. How can I change the settings to where it will all stay in the same tab?

When I search something Firefox automatically opens a new tab with the results of this search. How do I change the settings to where the results will appear in the same tab as where I conducted the search?

Whether to open search results in new window most often is a setting of the search engine you are using.

Use two VIs with the same name, different functionality on a single Project

Hi, I'm working with vision builder al labview, I need to integrate the vision builder migration Vis into my main program, (Is not an option), but I have multiple Vis autogenerated with the same name, how can i integrate them in the same project without dependency problems
Thanks in advance

Hi,
Unless you really need tight integration between the Vision code and the rest of your LabVIEW application, or would rather not have to pay for a Vision Builder AI runtime license on the targets on which you want to deploy your final application, I would recommend you look into using the Vision Builder AI LabVIEW API instead of migrating the inspection to LabVIEW.
The API allows to control Vision Builder AI by launching a Vision Builder AI engine, running the inspection and retrieving resulting images and results.
The advantage of the API is that it allows for easier modification and debugging of the Vision Inspection that you designed in Vision Builder, if you need to make changes later. (i.e. all you need to do is open the inspection in Vision Builder AI, modify parameters, add steps etc).
You won't have to change your LabVIEW application, unless you want to output additional results.
When you build and deploy your application, you will need to install Vision Builder AI on the target machine and get a runtime license for it.
Migrating the inspection to LabVIEW is a one way deal. If you need to make changes to the inspection, you will have to migrate the inspection again, or modify the code outside of the Vision Builder AI environment.
As you might have noticed, the code generated is quite complex, and it is recommended to go this route only if you need really tight integration/synchronization between the vision code and the rest or your LabVIEW code, or if you would rather pay for a cheaper Vision runtime license rather than a VBAI runtime license for the deployment machine (in case of deploying multiple systems where cost is a big consideration).
Vision Builder AI API examples are located in this folder:
C:\Program Files (x86)\National Instruments\Vision Builder AI\API Examples\LabVIEW Examples
Hope this helps clarify the use cases and help you make the right decision for your design.
Best regards,
Christophe

I notice that in the new update to Firefox if I have two bookmark folders with the same name Firefox will end up deleting one of them.

Both of these problems with the bookmarks started occurring after I installed the latest update to Firefox.
I frequently have bookmark folders of the same name under the older version of Firefox and it has never been a problem before. It is now, and I notice that after I've created two folders with the same name Firefox will end up deleting one of the folders, almost always the older of the two folders (the one created first, chronologically).
I have also noticed that with the new update Firefox will occasionally fail to open all bookmarks in Tabs if I've asked it to do so. I can simply close Firefox and reopen the program and it will work again, but I don't know why this bug is occuring in the first place.

You are using two IP address ranges.. which results in the printer being cut off from the other network..
Why do you have two networks?? It is always better in home situations to run one network.
If you have work setup with an enterprise level router you can setup routes between the two networks.. this is not possible on domestic level apple routers.

HT1918 My Apple ID (email address) is somehow registered to the US store even though I live in the UK. Can I close the US account and open a UK one with the same ID/email?

My Apple ID (email address) is somehow registered to the US store even though I live in the UK. Is there any way I can close the US account and open a UK one with the same ID/email?

No, but you can change the country of your iTunes Store account. Sign into your iTunes Store account and click the "change country" link. You'll need a valid UK credit card to complete the change. If you have any credit balance remaining, you'll need to contact the iTunes Store to clear that for you before you'll be able to change the country.
Note that if you purchased anything from the US iTunes Store, you probably will not be able to re-download it nor update apps once you change the country. So you may prefer to set up a new email address so you can create a new account in the UK iTunes Store. You can change the email address to which receipts and other notices are sent to your actual email address, if you prefer.
Regards.

Custom fields with the same name in Project Online

Today I discovered something interesting when creating custom fields in Project Online.
I usually create a certain set of custom fields that are useful to have on both the project and the task level. An example of these is Reportable, which I use to determine which tasks to roll up into reports and also which projects overall to report on.
So I created a project level custom field called Reportable. No problem.
I then created a custom field on the task level called Reportable. And the computer said no!
I then learned that although you could do this in Project Server 2013, you can't in Project Online. You can't have duplicate custom field names, even if they are of different types.
This has led me to use a naming standard, such as Reportable Task and Reportable Project. But I really don't like that as codes are for computers, not us humans. So I hope this changes in the future, but for now you just need to think about how you approach
the fields.
Good luck!
Ryan Darby
National Manager PMO
www.ipmo.com.au
www.projectonline.com.au

Hi Ryan,
I would follow Ben on this..
Just made a test on a Project 2013 instance on-premise and I cannot create a task ECF and a project ECF with the same name. The same test on a Online instance returns the same result: the ECF names must be unique whatever the entity is.
Waiting for Ben's confirmation.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

I forgot my digital signature password. How do I create a new one with the same email.

I can not remember my digital signature password. I've attempted to create a new one with the same email address. The message I receive is that i already have a digital signature with that email. I would like to use the same email address.

You probably mean that you forgot your digital certificate password and I presume that this is a self-signed certificate that you yourself created, not a certificate that you received from a Certificate Authority (CA). If this is true then you can create a new self-signed digital certificate (Digital ID in Acrobat-speak) the same way you created the first one: In Acrobat XI it is Edit->Preferences->Signatures->Identities&Trusted Certificates->More. Then click on "Add ID" button and follow the prompts. You can create as many self-signed certificates with the same credentials (name, email, etc.) as you wish. You'd have to figure out how to distinguish them, though.

Can you delete an iCloud account but then make a new account with the same password?

Me and my mum share the same iCloud account with her email address, but I can't make my own unless I delete my mum's account that I share with her. If I delete the account, will my mum be able to make a new account with the same password?
Thank you!

Yes. You can use the same password for all your accounts (although it's less secure to do so). You just have to use a different Apple ID to set up a new account.

If i cancel an account can I create a new one with the same e-mail address?

I made an account with Game Center and I wanted to use it to get some free apps on the iTunes Store. When I tried to sign in on iTunes (for Windows) it said I had to review my details. I didn't have a credit card so I couldn't complete it and there wasn't any option for no credit card.
I wondered if I could cancel my account and create a new one with the same e-mail address. There was a discussion that you could create a new account on the iTunes Store and have the choice to not have a credit card.
Any help will help!
SuperHoops

No, it does not, not if the creation of the Apple ID was completed, which unless you are referring to a different Apple ID I presume it did since you are posting here. And once created, you can't get apps without providing a payment method; setting up for just free apps requires a very specific procedure or a payment method is necessary. Creating an account via Game Center does not work.
If you can create a new email address (Gmail or Yahoo mail will work), take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.

I opened a new project with the same name as an existing project and it deleted my existing

Similar Messages

Maybe you are looking for