I own 2 iPhones -  a 4 and a 4S. Why does the 4 appear to have a better camera?

My Iphone 4S has a terrible camera,  My 4 takes better pictures expecially when the flash is used. I don't understand why!  I still take pictures with my 4 and send to Walgreens to print and they are perfect!  Ready to upgrade my 4 but afraid to get a 5.  I have loved my experience with apple and will hate to leave.  Anyway to change the settings,  I am embarrassed to show my pictures that I have taken on it!   Can anything be done?  I keep it upgraded on my I Tunes Account.  I really find it hard to believe that this 4S is so bad but I asked another Friend that has one and she said her 4 takes better pictures.  I said WOW!  I thought it was me! She is a business person just like me and I have 3,000 pictures on my 4.  As far as I am concerned my 4S is junk unless someone can help me!
<Edited by host>

The iPhone 4 has a 5MP rear camera whereas the 4S has an 8MP rear camera.
The video is 720P vs 1080P.
http://www.gizmag.com/iphone-5-vs-iphone-4s-vs-iphone-4/24351/

Similar Messages

  • PLEASE READ AND HELP. WHY does the tiger disc keep ejecting and wont start?

    i just got tiger and everytime i put it in the disc tray it ejects itself after 30 seconds or so... It wont show up on desktop or the startup disc.... tried holding C to boot up using it but it didnt work and tried all trouble shooting but nothing worked. Call apple but they said they dont support my computer anymore (its 6 years old). After i told them it was a G4 they said they couldnt offer me tech support. Please i have version 10.3.9. If you need anymore info please tell me. Why is it doing this. if there are multiple reasons plz tell me. I really want to install tiger. Yes i have full version of the DVD install disc. it is version 10.4 tiger. PLEASE help. Thank you

    Hi ddkillswitch, and a warm welcome to the forums!
    When you say you have the full version, what does it say on the Disks for numbers & such? Is it the Black Retail version?
    What happens if you have Disk Utility open when you insert the DVD, or is it CDs?
    What does System Profiler>Hardware>Disc Burning, (10.3.x may be a bit different), report for the Optical drive, like...
    PIONEER DVD-RW DVR-109:
    Firmware Revision: 1.58
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media:
    Media Type: DVD+R DL
    Blank: No
    Erasable: No
    Overwritable: No
    Appendable: Yes

  • Why does the E71 not have the infrared and Bluetoo...

    I have an old Panasonic X400 which I can send pictures to my Notebook , but when I try with my Nokia E71 , I get No connection , has anyone else had this problem ? and how can I fix ?
    The Bluetooth has the same problems , although sometimes it can find my computer ,but not allow me to send pictures to it ?
    has anyone else had this problem ?
    and how do I fix ?

    auto78900 wrote:
    where can I download the Nokia  OVI Suit ?
    here mate
    http://www.nokia.com.au/get-support-and-software/download-software/nokia-ovi-suite

  • Why does the ipad not have the apps wheather and stocks

    The iPad doesn't have stocks and weather

    All we, your fellow users, can tell you is that it's because Apple chose not to include them. There are a multitude of such apps in the iTunes Store, though.
    Regards.

  • When use scan mode and FPGA simultaneously, why does the FIFO Read can not be used?

    Hello, I am using compactRIO-9025 to do a project and trying to use scan mode and FPGA simultaneously ( Hybrid mode). I have already build a project as the following tutorial.
    http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690 and I have NI 9205, NI 9023 in Scan mode and NI 9871 in FPGA mode in the same project.
    In the FPGA Target of the project,  I add a FIFO and tried to use it to log in data from NI 9871. I wired the module I/O node to FIFO Write in the target vi. However, when I  droped the invoke method to the block diagram of the host vi and right clicked it, there is no FIFO Read can be choose. Could you please help me to solve this problem?
    Thank you very much!!

    I am not aware that using the Scan Engine is blocking any access to a transfer FIFO. But please reread this from your quoted KB:
    Secondly, the number of DMA FIFO's that can be used in the FPGA code will be reduced, since the scan engine uses two DMA FIFO's. Most FPGAs have 3 DMA FIFO's, so there will only be one DMA channel left to use in the FPGA code.
    This means, you have only a single DMA FIFO left which is either Target to Host or Host to Target.
    Make sure that you configured the FIFO to be the correct direction for your needs...
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Why does the games leaderboard have today's and yesterday's scores?

    Solitaire city TriPeaks ahas just started using the games centre leaderboard. The old one used to switch 'days' at end of the day pacific time. Now it seems all over the place and has yesterday and today's scores seemingly randomly. Can anyone shed any light on how the days click over in today's scores'? Thanks.

    The message you are seeing is telling you that you do not have enough storage on your device.  That has nothing to do with iCloud storage.
    iCloud storage is storage on Apple's servers hosting your online iCloud account.  The storage on your device is local and cannot be expanded - it is whatever you bought with the device (16GB, 32GB, 64GB).
    You need to delete things on your device to increase free space on the device itself.
    For example, if you have a lot of pictures in your camera roll, you need to sync those to your computer's photo management software and storage, then delete them from you iPad.
    You can delete apps you no longer need or use.  You can delete messages you no longer read or use.
    Bottom line is you need to remove stuff from the iPad itself to free up more space.

  • I've bought numbers & pages from the App Store but when I open either I'm being asked to use the iWork trial or buy it - Do I have to buy iWork too, and if so, why does the App Store leet you buy the apps separately if you need iWork in order to use them?

    Any help would be appreciated!
    Jim

    Hi Jim,
    Following Matt's instructions may be sufficient, but I'd recommend checking Yvan Koenig's post in this thread for a more thorough procedure.
    Regards,
    Barry

  • I transferred everything from my ssd to an external drive and deleted everything on 'all my files' and Iphoto. Why does it say i have 34.88/ 120.47? Also ordered 128ssd. why out of 120?

    I want to clear the unneccessary files in my hd. How do I do that?

    Did you empty the trash?
    Where  did  my  Disk  Space  go? 
    Slimming your hard drive
    Seven ways to free up drive space
    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace
    SpaceControl is a free utility that checks HD space.
    Disk Inventory X
    WhatSize
    SpaceControl

  • Why does the with i pad  have your name at the top and black dont

    why does the white ipad have your name up by the wifi bar but the black on dont just has ipad my white was a 4 and it had ashley's ipad and my black is a 4 and just said ipad.  

    Demo wrote:
    You can name your iPad anything you want to in Settings>General>About>Name. Maybe you named the first iPad but never named the second one. Maybe the first one was named when you set it up with iTunes and if you didn't set up the second iPad with iTunes or set it up as new - not from a backup, it would not have a name in the settings.
    I think that it's magic.

  • I own iphone 6 plus and iphone 4s . I have created 2 Apple ids but I want to use both ids on 6 plus... And also on computer ... I m of 16 so I can't have family sharing also... But i want to keep both ids app on my computer as well as on iphone 6  ..

    I own iphone 6 plus and iphone 4s . I have created 2 Apple ids but I want to use both ids on 6 plus... And also on computer ... I m of 16 so I can't have family sharing also... But i want to keep both ids app on my computer as well as on iphone 6 ....

    There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
    Now, to share apps, music and books you need to have the same Apple ID:
    iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
    For the other service, your wife should have her own Apple ID.
    All she needs is a valid e-mail address, apply Apple ID below:
    https://appleid.apple.com
    Here's a limk with useful tips: Note: It's also valid in IOS 6
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • HT201342 I have set up my iCloud email address on my iPhone and iMac but it does not appear on my iPad.  Dies anyone else have the same problem?

    I have set up my iCloud email address on my iPhone and iMac but it does not appear in my iPad?  Any suggestions?

    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team..

  • I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    Hi Lawrence,
    Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
    Regards,
    Rave

  • Why does the smiley images in iChat on my Macbook Pro come across as symbols to my iPad and iPhone recipients? example:  3 comes across instead of a "Heart" image

    Why does the smiley images in iChat on my Macbook Pro come across as symbols to my iPad and iPhone recipients? example:  <3 comes across instead of a "Heart" image

    Those chat images only work with iOS based devices.  If they're being sent to someone without an iOS device, it will go through as an ASCII character.

  • I used to be a softbank Japan Iphone 4 customer and i had cleared all the dues. Now i don't have softbank contract and i am in my country Nepal. How can i unlock and use my Iphone here in Nepalese Network ?

    I used to be a softbank Japan Iphone 4 customer and i had cleared all the dues. Now i don't have softbank contract and i am in my country Nepal. How can i unlock and use my Iphone here in Nepalese Network ?

    Hi Edward,
    You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.  
    Manage content manually on your iPhone, iPad, and iPod
    http://support.apple.com/en-us/HT201593
    Product Feedback
    http://www.apple.com/feedback/
    Contact Apple for support and service
    http://support.apple.com/en-us/HT201232
    Take it easy,
    -Norm G. 

  • HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

    Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

    Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

Maybe you are looking for

  • Please help! My new widescreen isn't working!

    So I bought a 22inch widescreen monitor for my 933mhz Quicksilver G4. The monitor has a resolution of 1680x1050. I used a DVI convertor and connected it to the ADC port. The problem is the picture doesn't look all that great, and worse, it looks real

  • Define sensitive fields for vendor master record

    Hello, Wer are on SAP ECC 6.0 Customer wants to define sensitive fields for dual control. I have defined the bankaccount number as a sensitive field but I do not know how I need to define the other settings. Can anybody helpe me with that ? Where f.i

  • Reg: CJ40 Cost Planning overall_Data transfer using BDC

    Hi, Is it possible todo transfer using BDC Prog for CJ40 cost planning overall. here in period im getting table control. if anybody give me sample BDC code for this CJ40. thanks in advance. Hema Edited by: hema prabakaran on Dec 10, 2008 1:23 PM

  • Generation v/s Parent/Child

    Hi, i try build a dimension with generation and parent/child option. Firts build the dimension with generation preference and after build with parent/child. I have two rules files, one with generation and other with parent/child these order, but when

  • 401 Error for all files after CF8 install?

    After I install coldfusion 8 on windows server 2008 with IIS7, I get a 401 "Unauthorized user" error for every page, regardless of whether its a CFM page or not. When I uninstall CF8 the error goes away. Has anyone else had this issue? Is there a res