I Pad 4 - I Cloud issue

I updated my i-phone 5 to IOS7 when it suggested I do so and without doing research on it first - should have!  I hate the look of the calendar it's really hard to read - and all of the information I had previously inputted for the upcoming months appears to have disappeared.  But the main issue I have now is that my I-pad 4 which was connected to the I-phone by I-cloud has a "blurb" frozen on it that says "ICloud Backup - This Ipad hasn't been backed up in 3 weeks.  Backups happen when this Ipad is plugged in, locked and connected to Wi-Fi" and gives me the OK option.  (I have been out of the country for 3 weeks thus no back-up).  Although I have followed all instructions, I can't get this blurb to disappear by pressing OK and I can't turn the device off to re-set.  The Ipad continues to appear to work as notifications are appearing behind the frozen "blurb". This appears to have just happened since I updated my Iphone to IOS 7 - any suggestions?

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.  This just restarts it, you won't lose any data.

Similar Messages

  • Adobe creative cloud issue to download the apps

    Adobe creative cloud issue to download the apps. Please find attached the error message below:
    we are faceing issue in woendow 7

    Hi,
    Regarding the download error issue please refer the following forum thread.
    https://forums.adobe.com/thread/1156604
    Hope this helps.
    Regards,
    Sumit Singh

  • CS6, used for several years, will not open due to Cloud issue????????

    I have a registered version of CS6 that I have used for a couple of years.  Now it will not open due to a Cloud issue.  CS6 was prior to Cloud!!  How do I open CS6???  Win 7 OS.

  • Sony 46V5100 clouding issue

    Just got this TV and it has noticable clouding on all four corners, especially at night during black scenes.  I see it's a common problem after googling it.  How do I replace this TV when its out of stock everywhere locally?

    I had this same model and returned it.  I saw the clouding issues just like you are saying, but the deal breaker for me was the red flashing that this series is known for.  It happens on certain times where the red in the picture will flicker to a different type of red.  You can google "Sony V5100 series red flashing" and learn more about it.  I heard that it is really bad on The Daily Show.   I exchanged this tv for a Samsung and upon setting up the Samsung, I looked it over and found at least 2 dead pixels, so I am either going to exchange it for the same model or go plasma, I'm not sure yet.  I hope this helps you to make a wise decision about keeping or taking back your V series tv.  If you can't deal with these two issues, flashlighting and red flashing, I would not exchange for the same model because it seems they all have these issues. 

  • Lost my i pad i cloud is not installed how to track

    lost my i pad i cloud is not installed how to track

    Unfortunately, if you didn't set up iCloud and enable Find My iPad on it before it was lost, it can't be tracked.

  • Padding and Centering Issues with and within div's

    I uploaded the page and css files to my server. The page file is http://www.wlvs.com/untitled-1.html and the css file is http://www.wlvs.com/test.css  I am using these file to try-out styles. The background div (backgnd) will ultimately be an image but for now I'm just using a color. The "wraper" has an image that I gave a padding to at the top and bottom and for some reason it is showing a dark blue color. - I thought it would allow the background color to show through - shouldn't it??
    The other issue is centering the logo in the "header". I suppose I could use <center> but I am trying to figure out what is the css code for doing it. Nothing seems to work. I was able to center the "wraper" image but could not do the logo.
    Any help would be much appreciated...

    I uploaded the page and css files to my server. The page file is http://www.wlvs.com/untitled-1.html and the css file is http://www.wlvs.com/test.css  I am using these file to try-out styles. The background div (backgnd) will ultimately be an image but for now I'm just using a color. The "wraper" has an image that I gave a padding to at the top and bottom and for some reason it is showing a dark blue color. - I thought it would allow the background color to show through - shouldn't it??
    No because padding creates the space between the edge of the element and its content and in your case this is covered by background image;
    However, if you apply margin-top and margin-bpttom then you should get the space you are talking about.
    To try it use this code:
    .wrap {
        height: 1113px;
        width: 740px;
        top: 0px;
        margin-right: auto;
        margin-left: auto;
        background-color: #FFF;
        background-image: url('images/TBarn04.jpg');
        margin-top: 20px;
        margin-bottom: 20px;
    hth

  • Creative Cloud Issue - Error 205

    Okay, this is kind of annoying. I'm trying to download Creative Cloud onto my computer, just the install manager (step 1) and it keeps giving me the same error when I click on the set up program. I've done everything suggested by other forum answers and the general tutorial and step by step stuff that they tell you try first. None of it worked. I'm still getting error 205.
    Other Info:
    I use Google Chrome and I have Windows 7 (64-bit)

    Hi Alice,
    Please refer to threads below where this issue has been addressed:
    1. Re: Installing Creative Cloud-Error 205
    2. Re: Creative Cloud App, installation error code 205
    3. ERROR 205
    Regards,
    Sheena

  • Creative Cloud issue with serial number (Photoshop CS6)

    Hi.
    I run Windows 7 64 bits. I just suscribed to Creative Cloud after my Photoshop CS6 evualuation period expired. I am now trying to launch PS CS6. I click the "Licence" activation button, connected with my adobe ID (with which I sucribed to Creative Cloud) but it stills asks for a serial number, which was not given to me. I tried uninstalling the whole Adobe product family from my computer and then downloading and installing again Photoshop but issue remains. I can't use Photoshop even though I paid for it the my current subscription is going on, I don't know what to do next. Thanks.

    There is a forum specifically for Download, Install and Setup Help HERE. Maybe they can answer your question.
    --OB

  • Creative Cloud Issues

    I had issues with my computer, i needed to do a system restoration  than  now i have not more installed the photoshop cs6 , but the creative cloud says : you have, now i cant download ps again. What i have to do? I think i need  erase some register that adobe have in my computer? Where ? How?

    Hi AlexandreAdilson,
    Please refer to the following knowledge base article on where "Creative Cloud desktop lists applications as 'Up To Date' when not installed"
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml
    Hope this helps.
    Please let me know incase of any problem.
    Regards,
    Sumit Singh

  • W520 - touch pad left click issue

    Earlier today my left touch pad mouse click started to stop functioning correctly. It will only work correctly every 8 to 15 times it is clicked leaving it unresponsive and unpredictable. The right works perfectly fine as do the trackpad buttons. I have uninstalled and reinstalled the drivers and have sprayed compressed air under the key.
    I had a similar problem with the laptop when i first got it but at that time the touch pad itself as well as the left click did not function properly. The face plate was replaced which fixed the issue.
    Is there anything i can do software wise that might fix the problem before i have to pay to fix the hardware? 

    Hi Tony
    If the unit is not the old one you should contact your local dealer or maybe Toshiba service partner in your country. Your unit has a valid warranty and you can ask them if there is a possibility to do something about that.

  • Parential Lockout in the Cloud issue

    I have a E4200 V2 recently upgraded to the Cloud.  Luv the new software.  One area I really liked is the new parental admin area which has more options regarding lockput time than the old non cloud software.
    There does though seem to be a problem with the parental area.  When I engage it, I can set certain computers to use connections at specific times, yet this does not appear to be working.  Every PC on my network is locked out of Internet access not just those I have set up times for.  Am I doing something wrong or is this and issue?

    Seems the router was not properly reset. Check out the links below to guide you on how to reset the router and so with the Parental Control configuration.
    Resetting your Linksys router to factory default settings
    http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=eaa3127db5f4402584c959a7251e754c_4008.xml&pid=80&...
    Setting up Parental Controls using Cisco Connect Cloud (Video)
    http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=27042

  • I pad 3 camera issues

    my cam has gone strange on my i pad 3 when i put cam on its black then sometimes it takes a pic with forward facing camera then when i change it to rear cam it shows the shot of my face but blurry totaly baffled by this need advice plz thanks

    Hi, kejanine2013.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are having an issue with images out of focus on the camera.  Here is a troubleshooting article that I would recommend going through.  
    Get help with the camera on your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT203040
    Cheers, 
    Jason H.

  • Helix Touch pad - right click issue

    Hi,
    I bought my Helix about a year ago.
    Today, suddenly the right click just stopped to work (I mean the button on the right-down area of the touch pad).
    It's a HARDWARE problem: first it was not clickable, and now the button goes down, but without the normal "click" sound. Seems like it is stuck down and the area around the right button isn't functional to click anymore.
    First I thought it was some dirt inside, but it doesn't seems to be a dirt problem... the button just stuck
    Any thoughts?
    Should I open it? If so, what are the procedure?

    Hi AndScientist,
    Thank you for the reply!
    I am glad to know that the issue has been resolved. Please feel free to post in Lenovo Community Forums if you have any further queries!
    Have you done any troubleshooting for the issue if yes, we request you to provide those steps so that this will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Verizon Cloud Issues on S6 Edge

    I am having issues with Verizon Cloud not restoring all of my messages, photo's, and contacts.  Is anyone else having this issue and what is the remedy?  I have tried doing a factory reset to no avail and I'm getting pretty frustrated as when I upgraded I made sure everything was backed up to the cloud before I even walked in the store.

    Not only are my contacts stuck in the trash on verizonwireless.com, but every couple of days Verizon Cloud syncs to my phone and removes all of the contacts from my phone, and this has happened three times now! I never had this problem when using backup assistant, but now that I have the cloud instead it is causing this major problem.! Also, I downloaded the Cloud desktop application on my PC, and even though my username and password are both correct, it will not let me in no matter what.
     Please get back to me asap, I am extremely frustrated right now

  • Why has Apple always had sync/cloud issues?

    I've been using Mac computers (and phones) for decades.
    I can't remember a time there was no issues with Apple syncing to the cloud and across devices.
    Today I discovered yet more sync problems with the lists in the Reminders app not syncing their position properly across devices.
    I've re-booted, turned on/off, etc. etc. bla bla... I don't even want to fix it... it's just the same story... decades on.
    I-disk, Mobile Me, iCloud.
    Why can't Apple figure it out?

    I have no such problems.

Maybe you are looking for

  • Looking for a Photo App recommendation.

    I am looking for a site forum or where I can ask to see if this type of Photo Editing App exists? I need one that can paste one photo on top of another, or similar? More or less, a pic in a pic type. I have tried some collage apps yet they only place

  • Safari Crashing - Mavericks 10.9.2 - Help appreciated!

    I am realatively new to OSX but have used Linux and Windows for years.   New Macbook w Mavericks.  I am getting the following crash report with Safari.  About 1 in 10 times I see it load sucessfully for a second and then it crashes.  Usually I get th

  • What is the price of Windows 8 if bought from Parallels Desktop 8

    What is the price of Windows 8 if bought through Parallels Desktop 8 ? I know Parallels 8 cost $79 but what's the additional cost to download the full version of Windows 8 ? Also if its downloaded do I get a CD also sent to me at no additional cost ?

  • Exporting from Final Cut Express HD (3.5) to Quicktime 7.6

    I have a video compose of stills and some video. Some of the stills have movement and others do not. Also to the 12min video I have added Nattress special effects so the video can look "film like" After the video is done I ended up exporting it to QT

  • Internal Message Code: MESSAGE G:N

    Hi, We have upgraded from 4.7 to ECC 6.0.  We are executing the Code Inspector transaction to correct the syntactical Errors occuring in Programs.  When we try to execute this transaction for User exit,  i am getting the following message.  Please he