I pad error msg: cannot read contents of ipad.

Everytime I try to connect my Ipad mini to Itunes via my PC- I get an immediate error message saying that the contents on my Ipad cannot be read and that I should restore it.
I'm very reluctant to do this, as it's a hassle to have to replace all my apps and music. Plus my ipad isnt even two months old! I have tried re-booting my ipad/ turning my PC on and off etc- but still no luck- has anybody any suggestions that could help me please?
Thanks

This article tells you exactly how to restore your iPad:
http://support.apple.com/kb/HT1414
Will you lose information?  Well, that depends on how much information you saved when you did your last backup.  You can retrieve that information - the rest will be lost.  You will certainly lose all email messages.

Similar Messages

  • Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

    having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

    Hi George ,
    Is it happening with all the PDF' or any specific one?
    Could you please share the error message so that we can replicate at our end ?
    Try repairing reader  once and see if that fixes the issue.
    Launch Reader>Navigate to Help>Repair Adobe Reader Installation
    Regards
    Sukrit Dhingra

  • Error message on Itunes. Cannot read contents of Ipod....

    I forgot to eject my sons Ipod touch before I unplugged it from the USB. Nowwhen I plug it in it tells me itunes cannot read contents of ipod must restore to factory settings.. Please help?! I've tried restarting my computer and Ipod. I've updated Itunes. I used a different cord and I went into settings and reset everything. I'm affraid to restore th Ipod because he has bought games that I don't want him to loose.... Any suggestions?

    That happens when you do not eject the iPod and the iPod is syncing.or upddating.
    Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Itunes cannot read contents of the ipod.  go to summary tab in ipod preferences and click restore to restore to factory settings

    I plugged in my ipod to install the latest version of itunes on my computer and I got this message:  "itunes cannot read contents of the ipod.  go to summary tab in ipod preferences and click restore to restore to factory settings".  I can't get rid of it and now have zero songs on my ipod but all of my songs are in my library.  Help, please.

    Sorry, my mistake, the nano has a flash-based drive so most of that post won't apply, although you might see if the DFU restore section works.
    Try also suggestions from iPod nano: Error message saying that iPod 'could not be identified properly'
    tt2

  • Itunes cannot read contents of IPOD, please restore to factory settings...

    And I'm pretty sure I've done it like... 10 times now.
    This is starting to drive me nuts... Im not sure when exactly the problem started, but my IPOD (30gig video) has been working fine since I got up... Up until now. I Believe it was just after updating to the newest version of ITunes, but Im not 100% sure.
    Since then, almost every time I plug my IPOD into my laptop, ITunes pops up with this message and asks me to Restore my IPOD using the IPOD Updater. The IPOD is recognized by Windows Explorer every time, and is always recognized by the IPOD Updater.
    Every time I Restore it, and rename the IPOD, recopy all my music, etc... It works fine until I use the IPOD for some extended period of time... I've tested it just using it for a few minutes then plugging it back in and it tried to update my music fine, but If I use it for a few hours, the next time I go to plug it in, I get the same ITunes Cannot Read Contents of IPOD error.
    I've done the Five R's numerous times, Reinstalled both ITunes and the IPOD Services numerous times... Everything shy of formatting the system to get this to work, but it just keeps happening...
    What's also weird is that when I DO Restore it, and set it to Update My Library in ITunes, It says the IPOD is linked to another library and then I have set it to link to mine? Could this have anything to do with it? For the record I have not been switching computers with it or anything lately... so I'm not sure if that has anything to do with it...
    Anyone have any idea, or should I take out a Service Order?
    Please let me know,
    -Stef

    I've got a brand new iPod Video 60Gb and i have had this message since the first time i synced it. I think i restored the iPod about 10 times but it's always crashing when i unlupg it. It try to listen to something, the musics are on the iPod but they aren't listed in playlists or under artists or songs.
    Then i plug it to iTunes and i got the message: iTunes cannot read the content.
    I've bought a Belkin card just for it, the one recommended for iPod USB 2.0. Doesn't change anything. I've tried different USB ports, again, nothing new.
    I was just going to try using USB 1.0 but it's sooooooooooooo slow that it will take me like 12 hours to sync the iPod!
    I don't know what to do now, as i can't find if it's a computer problem or an iPod problem...

  • Ipod classic music erased, with "iTunes cannot read contents of iPod"

    I went to sync my ipod classic 120GB and before it began, a message popped up telling me that there was a problem with my devices and that they should be scanned and fixed. I went to scan and fix them, but it failed each time. It started syncing but then an error message came up saying, "iTunes cannot read contents of iPod, go to summary tab in iPod preferences and click restore to restore this iPod to factory settings. I took my ipod out of the usb cable and looked to see that my music had all been erased! I went to the preferences tab that it told me to go to and if I restore the iPod to factory settings then all my media will obviously be erased. I have tried a few times since then to re-sync it but it is coming up each time. I had previously had another iPod with this same iTunes account, but it was lost. I bought this new one about 7 months ago and I have had no problem syncing until now. I also had to get a new hard drive for my computer, but that was about a year ago and I illegally saved the music files from my itunes to my new hard drive so I could have all the old music from my ipod on the new one. Is there any way I can get my music back onto my iPod or do I really have to set my itunes back to factory settings and erase all my media?

    I've got a brand new iPod Video 60Gb and i have had this message since the first time i synced it. I think i restored the iPod about 10 times but it's always crashing when i unlupg it. It try to listen to something, the musics are on the iPod but they aren't listed in playlists or under artists or songs.
    Then i plug it to iTunes and i got the message: iTunes cannot read the content.
    I've bought a Belkin card just for it, the one recommended for iPod USB 2.0. Doesn't change anything. I've tried different USB ports, again, nothing new.
    I was just going to try using USB 1.0 but it's sooooooooooooo slow that it will take me like 12 hours to sync the iPod!
    I don't know what to do now, as i can't find if it's a computer problem or an iPod problem...

  • IPod nano help - "cannot read contents of..."

    Hi,
    I have a new iPod Nano and it currently has no songs on it. Whenever I plug it in, this message comes up on iTunes: "Cannot read contents of the iPod "DON". Use the iPod Updater to restore the iPod to factory settings."
    I have two iPods, one is my new nano and one is a regular iPod. My regular iPod works fine on iTunes, but I just can't seem to get my iPod Nano to be recognized by iTunes. Any help is appreciated. Thank you.

    I actually tried via sharepod, and iexplorer, but it still had the error telling me theres no data on the device the ipod on its own functions normally and still has all it's data on it. the only last thing i could come up with is redownload all my songs its taken me a long time but i hope restoring it will solve my problem!

  • Itunes cannot read contents of iphone

    For some reason, my wife's iPhone will no longer synch w/ iTunes.
    When I plug in the phone, I get an error message saying "itunes cannot read contents of <my wife's name>'s iphone". The only apparent solution to this is to "Restore the iPhone software" in iTunes.
    I can back up music, Outlook, etc, but I'm worried about the applications and any other customization/settings done on the phone. If I restore the phone, will my apps be intact afterwords? What else, if anything, might get lost?

    Hi,
    The apps are stored in iTunes. Select Apps under Library on the left side of the iTunes window. Those apps are available to resync under the Apps tab in the iTunes menu between Info and Music.
    If you can restore from a backup, then the customized settings may still be intact but no guarantees. Best to make note of those settings before restoring.
    You can see if there's a backup available from iTunes / Preferences then select the Devices tab.
    Carolyn

  • M90p - Error 0189 Cannot read the security EEPROM

    Hi,
    I have a Thinkcentre here that says during POST:
    Error 0189 Cannot read the security EEPROM
    It then prompts me to enter the BIOS, but no matter what I try, I cannot get rid of the message and boot to the OS.
    What should I do?
    BTW, what is the header labeled "ME_Disable" on the motherboard?
    Thanks,
    Smith

    Hi! I with have problem 0189 Error. How to fix it? Pls.

  • Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG)

    Hi,
    We are running a depriciation report in our test instance which is on 12.0.6 Oracle Apps
    While report executes we get this error:Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG)
    Can u please highlight where the error lies.

    Hi;
    Please see:
    Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG) When Viewing the Concurrent Request Output [ID 466410.1]
    Regard
    Helios

  • I am unable to copy my contact which are in *.vcf format in my pc to my icloud. error shows cannot read the vcard. help

    i am unable to copy my contact which are in *.vcf format in my pc to my icloud. error shows cannot read the vcard. help

    Hey guys,
    So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
    Aaisha

  • My notebook gives me an error msg disk read error

    Hello
    i Have HP G7 Notebook
    whenever i turn on my notebook it gives me an error msg disk read error
    tried running the test by F2 Got the failure iD short test Passed short dst software failed
    when ran the diagnostics frm the Bios test Has been passed?
    what Can B Done Now ????
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    This question was solved.
    View Solution.

    Hi,
    The short Disk Self Test error would indicate a problem with the Hard Drive - is your G7 still under warranty?  You can check your warranty status Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player.  i downloaded the free Burn program since i don't have idvd on my new mac  the dvd comes up disk error or cannot read

    created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player.  i downloaded the free Burn program since i don't have idvd on my new mac  the dvd comes up disk error or cannot read.  I am using a dvd-r dvd and my dvd player says that it uses this type of dvd.  Any suggestions.  I spoke to an Apple Support person who helped me burn the dvd but it still didn't work...help???

    There's a difference between a data DVD, and a DVD-Video.  I believe you made a data DVD, which can't be played in a video player.  The Burn feature of the Finder can't author a DVD-V, just data discs.   
    I assume you made a Project, and put clips from your Event Library into the Project.  But then, how did you output your Project, using the SHARE menu? 
    When I pull down iMovie '11s SHARE menu, "iDVD..." is one of the options.  It's the job of iDVD to make the menu that appears when you insert a DVD into your player (that says the title, and chapters, and extras, etc.).  You need software that will made a DVD-V disc.  Lacking that, you might be able to go to Share/Export Movie... or Share/Export using QuickTime... to get your video into a format that software like Roxio's Toast could burn. 

  • ITunes cannot read contents & lost iPod content

    As an update to an unanswered post last week:
    Following the upgrade to iTunes 7, I now get the 'iTunes cannot read contents of iPod' message when I plug in my iPod. The message tells me to 'restore factory settings' but I can't do this (because the iPod isn't recognised) & don't want to do this because I don't want to lose what is on my iPod (it wasn't backed up & isn't in sync with iTunes).
    Any suggestions?
    In addition, all playlists have disappeared from my iPod menu along with a few thousand tracks. I believe the music is still on there because when I look at it via Windows, all the files seem to still be there.
    Any ideas on how to restore these?
    Cheers

    Hi tc2000,
    You'll have better luck at finding the help you need in the appropriate forum.
    5th Gen Ipod
    http://discussions.apple.com/category.jspa?categoryID=157
    Sorry I can't help.

  • Itunes cannot read contents of this phone

    I updated my iphone 6 to the ios 8.1.3. it rebooted the phone while still connected to the computer and itunes and now all of a sudden, itunes says "it cannot read contents of this phone" and the only option it's giving me is to restore to factory settings. unfortunately, i didn't back up first before updating. HELP! I'm going nuts here.

    This solution worked for me:  http://youtu.be/TeHiwRZbcho
    Before doing it, though, I updated my Time Machine backup manually, just in case.  I also added one step not in the video.  The file I was told to delete I first copied to my desktop and confirmed that it could be put back on my device.  It literally took one minute.  As I type this, my phone is doing its first backup in two months and iTunes didn't give me any heartache.
    FYI:  I don't know why iTunes doesn't seem to allow multiple backups anymore but once I finished my phone's initial setup I backed it up to the cloud as a safety precaution so I would never have to start from scratch again.  I do regular backups to my computer so that if one becomes corrupt, I can turn to the other.
    I've had this same problem since the last update (12/15/15 -- almost two months ago) and was hoping this latest would fix it.  It didn't.  Factory reset was not a viable option.  Finally, this morning I did one final search before piecing together what backups I could (photos, exporting from what few apps offer exports, etc) and tried one last search.  Using the exact wording in the iTunes warning led me to the video.

Maybe you are looking for