I pad has no sound

Hello my i pad has no sound,I have tried the home double click,slide left to right but the volume slide on the right does not show up,it seems to work ok via headphones? Please help

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • My I-pad has no sound! checked everything! try resetting to no avail?  Help??

    My I-Pad 2 has no sound.  Have checked setting, tried holding the home and off button and restating, or just turning off and leaving awhile , still nothing.  Any ideas or help?

    This is my standard boilerplate set of suggestions to try if you lose sound on the iPad. Don't dismiss something just because you said that you tried it before. Make sure that you are resetting as described here and so on. Also, double check the settings- there is more than one way to mute system sounds.
    1. If you have no sound at all, even in the Music App, try resetting the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    2. Reset all settings. Settings>General>Reset>Reset all settings. No data will be lost but you will have to enter all of the device settings again.
    3. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    4. If you still have no sound, try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

  • My i pad has no sound yet i can hear with ear phones

    I have tried a reboot and changed language but fear the speakers are no good. Does anyon
    e have any suggestions?

    It sounds like your speaker is broken. It could also be a (unfixable) software issue. Neither issue can fixed by replacing a part or by software support. If you are under warranty (and there is no liquid damage to the device), then Apple might be able to replace the iPad. I highly recommend seeing an authorized Apple service provider ASAP.
    I hope you find a solution!

  • My i pad has sound but when it comes to all the applications they dont have volume. I go to the settings of the applications but it still does not work.

    i pad with no sound on applications

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • TS3992 I have a pre paid Wi Fi with telstra for 12 months and yet I get the message of this I pad has not been backed up I have no idea how to back it up can you help. I have the same problem with my I phone withTelstra please tell me how to back them up

    Hi I have an I pad 64 gig and internal wifi bought about 2 months ago. it keeps coming up with a message "this i pad has not been backed up" I have no idea how to do it can you help.
    I also have an I phone 4s with the same message both are with telstra the I pad has a 12 month pre paid wifi contract and the phone is on a monthly contract.

    Sounds like you actually paying for cellular service and you really need to be on wifi to backup your ipad/iphone.
    Normally you have to be connected to wifi and you can do manual backup by going to Settings- icloud- storage and backup and pressing backup now button. Start with your ipad, usually size of the backup smaller and return here if you encounter a problem.

  • My iPod touch has no sound when I play music or use the iPod touch at all.  Yes, the volume in the "sounds" is all the way up.  It has not been dropped or gotten wet.  I turned it off and on.  now what?

    My ipod touch (4th generation) has no sound.  I have turned it off and on.....I have the volume up in the "sounds" area.  When I push the side volume button, there is no image that appears in the screen that shows that I am either raising or lowering the volume.  Do I need to just rest the ipod touch as a new device? Or is there someting else I can try?

    And, now when I do press the side volume buttons, the image appears but with the words' "sound effects."  what does that mean?

  • My 4s has no sound on most outgoing calls. i constantly have to turn my phone off and on more than once a day to get it to work. how can i get this fixed?

    My 4s has no sound on most of the outgoing calls i make. It will ring the other phone I am calling but I cannot hear it nor can they hear me when they answer. Its just dead air but my phone timer is in use. How can this be corrected?

    It's very possible that you have stuff running in the background that you don't even realize you have running. For example the default is for all notifications to be on and you usually need few to none of them.
    That said, while an iPad can run warm, too hot to handle isn't right. ALso you should get about 10 hours....depending on what you're doing of course. If you're doing processor intensive stuff, like gaming and videos it can drain faster and generate more heat.
    I would say if you have an apple store near by, make an appointment and have them check it out. If the issue is due to what they determine to be manufacturer's defects then it could fall under the warranty. But that's up to the store to determine.

  • My iPod touch has no sound from music and videos help please

    My iPod touch has no sound at all, help please guys.

    - The restore from backup
    - If still problem restore to factory defaults/new iPod.
    - Last, make an appointment at the Genius Bar of an Apple store.

  • My iphone 5 has no sound

    My iphone no longer has any sound at all through the speakers or the headphone.  I can't hear ring tones, any tones, music, videos, use of the speaker phone during phone calls, nothing. This phone is only 2 months old and I just did a software upgrade and that didn't help.

    i have a macbook so sometimes this happens to it as well. what i found to help a lot is if you stick a sewing needle into the headphone jack. similar to the macbook, i feel like the connection thinks it's still plugged into something (notice that when you're adjusting the volume it says volume (headphones) not just ringer). unlocked, and while adjusting the volume, probe around with a needle, pushing it as close to the center all the way in. you may have to do this a few times. the first time i did it it worked, but went back in a few seconds. i did it again and it worked!
    no need to drive to apple!

  • I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...

    I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...
    help please!

    Are you going to Movies - Purchased or Computers - Movies ?
    If you go to iTunes Store  on your computer - Quicklinks - Purchased. Is it showing up there?
    Is this a purchase or a rental?

  • After updating to 6.1.3 my phone has no sound, no ringtone, no keytone, after updating to 6.1.3 my phone has no sound, no ringtone, no keytone. How can I fix this?

    After updating to 6.1.3 my phone has no sound, no ringtone, no keytone, after updating to 6.1.3 my phone has no sound, no ringtone, no keytone. How can I fix this?

    This happened to me too, so I took it to the Genius Bar at my local Apple Store. They said it was coincedental and the speaker needed to be replaced. They did so and the problem was solved!

  • Brand new iMac 27 has no sound

    A buddy just got a brand new iMac 27, out the box last night. It has no sound.
    He went to Systems Preferences and the Sound page provides no solution. Nothing can be clicked.
    I know the solution is probably insanely simple, but cannot figure it out.
    Help please.

    The simple solution is take it back to Apple and ask them to fix it.
    Allan

  • My iphone 4s no longer has any sound expect with headphones.

    My iphone 4s no longer has any sound expect with headphones. I have cleaned the head jack and dock connector, restarted, and reset the phone. This occurred after updating to ISO 6. What else can be done? Thanks!

    If you are near one, make a reservation at the Genius Bar at the Apple Store.

  • HP pavilion dv6000 with windows 7 64 bit has no sound after disassembl​ed.

    Hello there,
    I have an HP Pavilion dv6000 and after i disassembled and reassembled it to clean the fan, the lap top has no sound. In the device manager an error on ''PCI bus9, Device 9, function 2 & 3'' was appeared but after i installed new drivers the errors was fixed and it was written that the device was working properly. but unfortunately the device is not working properly because i stills have no sound. I also disassembled and reassembled for second time to find out if the problem was minor like an unplugged cable but everything was completely fine. Operation system: Windows 7 64 bit.  Can someone please tell me what to do?

    Dragon-Phoenix wrote:
    I was looking for the driver download for the webcam in my laptop, the only drivers I found works on Windows XP or Windows Vista.... Please help me in downloading the web cam software that would work with Windows 7 ultimate.
    Looking forward for your fast reply
    Thank you
    Dragon-Phoenix wrote:
    I was looking for the driver download for the webcam in my laptop, the only drivers I found works on Windows XP or Windows Vista.... Please help me in downloading the web cam software that would work with Windows 7 ultimate.
    Looking forward for your fast reply
    Thank you

  • IOS 7.0.4 on iPhone 4S has caused sound to go on and off? Has anyone else experienced this? Is it fixable?

    Also the animation of the bell with a sound bar underneath is not working properly. Sometimes it pops up with the bar under the bell and sometimes the bar is missing and just the square with the bell is all you see. The side sound buttons are still functioning, just an animation glitch. When head phones are plugged in there is no change in the strange sounds going in and out. Videos are the worst and not only do they not play sound but thy also pause themselves??? The typing has intermittent sound. I have hard reset and rebooted my phone about 8 or 10 times with only temporary relief. I connected to iTunes and toatlly reset everything once, still no change??

    Are you connected to wifi?
    If you can't do it on the phone, you can most certainly do it via itunes.

Maybe you are looking for

  • GF3Ti200 and high voltage

    I have card GF3Ti200 (8850) and 3D!Turbo submit problem  ***MSI VGA Monitor Warning Message***  Memory voltage is unusual  Now memory voltage is : 3.29 Volt question: 1. How much volt must have card? 2. How can i change this voltage?

  • Itunes library will not close down all the way

    My iTunes library will not close down all the way.  When I close the library I am unable to log back in or turn my computer off because itunes is still running although I x'd it out.

  • BitmapData.draw Security error

    I am drawing to bitmap from MediaContainer: var mediaContainer:MediaContainer = new MediaContainer(); bitmapData.draw(mediaContainer); This works, but when I switch video, an error occurs: SecurityError: Error #2123: Security sandbox violation: Bitma

  • Multiple Artists for one so

    Hi all, Kapyrna here. I just bought a Zen Vision:M 30GB and I love it, for one exception: I have a lot of video game remixes and such that have more than one artist as filed in Windows Media Player (like this: [artist]; [artist2];...). I'm using ID3

  • Tables to find breakdown information for External Process

    Dear all, may i know is there any tables which i can used to look for the breakdown information of external process (In production order -> Goto -> Cost analysis)? Currently i only able to find the summarise data in table COSP. Pls kindly advise. Tha