I pad mini latest version of itunes installed on my PC. Sync stuck at Step 2 of 6. Please Help!
Hi Everybody,
I have a new i pad mini and recently I installed the latest version of i tunes on my PC(windows 7). However, the i pad refuses to sync and is stuck at step 2 of 6. This is the first time I am syncing my device with i tunes. I tried to sync only a few songs to test it.. to be precise 6 songs!!
Today,I went to the i store and even they weren't able to help me with it.
Can somebody help me with this ?
Thanks in advance
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
I have the iphone 5S and it doesn't seem to even connect to my macbook because when i connect it to my phone, a message on my laptop shows that I have to install he new version of itunes on my phone. How on earth do I do that??? I Already have the latest version of itunes installed on my laptop already.
It should be telling you to download the latest iTunes on your computer... you can't install iTunes on your iPhone.
-
I cannot play the m4v movie (Linear) I downloaded with the U2 album "No line on the horizon". I have the latest versions of itunes and quicktime. I have a windows 7 computer. Can you help.
Hi whatisitagain,
Thank you for participating in the Apple Support Communities.
If the movie you downloaded from the iTunes Store is not playing in iTunes for Windows, start with the troubleshooting tips in this article:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues - Apple Support
All the best,
Jeremy -
While looking to upgrade to a newer MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. Syncing of these must be done through iCloud. This is a deal breaker for me for several reasons. Are there any workarounds or do I have to go back to a PC with my tail tucked between my legs?
When you say wired syncing, are you meaning between an iphone and your mac?
-
How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
Can anyone please help me with this so I know how many music files or video files I have in my collection.Have a look here...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/ -
I can't get the latest version of iTunes installed on Mac.
I can't get the latest version of itunes to update correctly. It seems to hang up on installing 2 items, running package scripts.
I've tried downloading through the browser with no luck too. Suggestions?Have you tried removing your existing version of iTunes prior to doing the install, willie? See the following document for instructions:
Removing iTunes for Mac OS X -
I have ensured I have installed the latest version of iTunes and conducted everything to the point of burning from a playlist to a CD. When I do this the iTunes window states "Disc Burner or Software not found" "CD/DVD doesnt have connectivity to burn via iTunes".
I have checked my drive and it reads a pre-recorded disc correctly. Any help please ???I have the same problem as simtagman. Would you mind looking at my diagnostics?
Microsoft Windows 7 Home Premium Edition (Build 7600)
Dell Inc. OptiPlex 745
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00**********DA0
Current user is not an administrator.
The current local date and time is 2013-01-30 20:37:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) Q965/Q963 Express Chipset Family
Intel Corporation, Intel(R) Q965/Q963 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: SONY DVD-ROM DDU1615S, Rev EDS3
Audio CD in drive.
Found 12 songs on CD, playing time 47:22 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:58:33
Track 3, start time 08:07:13
Track 4, start time 11:52:03
Track 5, start time 17:18:13
Track 6, start time 20:39:28
Track 7, start time 23:42:71
Track 8, start time 28:40:61
Track 9, start time 32:44:72
Track 10, start time 37:00:26
Track 11, start time 40:09:35
Track 12, start time 43:05:43
Audio CD reading succeeded.
Get drive speed succeeded.
<Edited by Host> -
Authorize Computer with the latest version of iTunes installed?
I searched all the previous threads with detailed information on how to authorize your computer, and it goes like this:
1) Go to your library
2) On the menu bar, choose 'Store' and then from the drop down menu choose "Authorize Computer"
I just downloaded the newest version today (2/23/2013) and my Menu bar is now totally different than the previous version on my other laptop.
On one end it says MUSIC in the middle it says Songs, Albums, Artists, Genres, Playlists, Radio, and Match. And on the other end it says iTunes Store.
The old menu bar has vanished, the new menu has no place in the iTunes library to choose "Authorize Computer",. is there anyone who has the LATEST version of iTunes that knows where to go to authorize my computer?
I actually authorized it by using "Home Sharing" feature,and I'm not sure how I found this but when it asked if I wanted to authorize the computer, I chose it, but that was not found in the instructions anywhere, so does anyone know what the deal is? Do they need new instructions for this latest version, or am I just an idiot?If you're using Mac OS X, move the cursor to the very top of the computer's screen.
If you're using Windows, press the Alt and S keys.
(77505) -
My pc will not let me download latest version of iTunes therefore I cannot sync with my iPod or iPad. Help...
Are you having trouble downloading the installer for iTunes? Or are you having trouble installing it?
-
I have had to restore my pc to a place back in time when it worked correctly. This meant that iTunes was deleted. I have now downloaded the latest version of iTunes but I cant sync my iPad with it. I get the message that this iPad is synced with another iTunes Library and cant sync to this one. Thankfully all my music library is on iPad. I would be grateful for some help on this issue
Its solved I just restored it to that point
-
I just upgraded to the latest version of iTunes and can no longer sync
Worked fine before upgraded of iTunesto the latest version now cannot sync iPod touch. error message is that will be wiped and replaced by library which is too big for the device so I have to wipe it and reinstall manually which takes at least four hours. Cannot backup as not able to in iTunes and do not haveiCloud. Use win7
Again:
You said: " Cannot backup as not able to in iTunes" What happens when you try to backup?
What are you doing when you get this message: "I have followed the solution but am not given the choice to select the device."?
What do you mean by: "The dates and times on both match."?
You are not telling use what you are doing and what happens when you do it. -
I cannot update the latest version of iTunes. I seem to get stuck in a loop of pages
Someone please help! Cannot update to 11.1 or higher so cannot sync music off my laptop. Tells me I have to update. I email myself the link and it is just a link back to the help page. Cannot find (on my iPad iTunes page) a help button. What on earth am I doing wrong??
Check for updates on iTune (computer)
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%204/a298c11a55205eed00d 100464de7ab43_zpsc302be89.jpg -
We also have an ipod touch and my new ipad - which I have not attempted to sync yet until this issue is resolved.
Most USB port do not supply enough current to charge the iPad.
-
Do I have to un-install and re-install iTunes or do I have to restore my iPod Classic (I don't want to lose everything in my music library)?
Clicking sounds from an iPod that has a hard drive for storage is not a good thing. It usually means the hard drive is faulty. That is the likely reason for getting an error during the attempt to Restore.
If you use a Mac, you can try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility. Does the iPod appear in the Disk Utility sidebar? If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one). Go to the Erase tab. Set the Format to Mac OS Extended (Journaled). Name does not matter. Click on Security Options and choose to write a single pass of zeros over the entire disk. This serves as a good "stress test" for the iPod's hard drive. Back on the main window, click Erase.
This takes longer than a regular erase, but you should see steady progress. If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore -
Error report Detials:
Process:
Adobe Edge Animate CC 2014 [2421]
Path:
/Applications/Adobe Edge Animate CC 2014/Adobe Edge Animate CC 2014.app/Contents/MacOS/Adobe Edge Animate CC 2014
Identifier:
com.adobe.Adobe Edge Animate CC 2014.application
Version:
4.0.1 (4.0.1.0)
Code Type:
X86 (Native)
Parent Process: launchd [147]
Responsible:
Adobe Edge Animate CC 2014 [2421]
User ID:
501
Date/Time:
2014-09-17 15:12:54.365 +0800
OS Version:
Mac OS X 10.9.4 (13E28)
Report Version: 11
Anonymous UUID: 3C9F4CB0-A7C7-FB06-15AC-56B46C9D393B
Sleep/Wake UUID: 17323D0B-01FE-4E0F-BD7D-EE003004002E
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
terminating with uncaught exception of type dvacore::filesupport::file_exception: $$$/dvacore/filesupport/error=Error with file: '@0'.
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib
0x91ede952 __pthread_kill + 10
1 libsystem_pthread.dylib
0x95e5c167 pthread_kill + 101
2 libsystem_c.dylib
0x9c20f29c abort + 155
3 libc++abi.dylib
0x97e1c6c9 abort_message + 169
4 libc++abi.dylib
0x97e3d47d default_terminate_handler() + 264
5 libc++abi.dylib
0x97e3ac30 std::__terminate(void (*)()) + 14
6 libc++abi.dylib
0x97e3a64b __cxa_throw + 116
7 com.adobe.dvacore.framework
0x003d0c3b dvacore::utility::ThrowIfCopyError(long, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 331
8 com.adobe.dvacore.framework
0x003d0a22 dvacore::utility::FileUtils::Copy(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 290
9 com.adobe.Adobe Edge Animate CC 2014.application 0x000250e3 helium::FolderCopy(dvacore::filesupport::Dir, dvacore::filesupport::Dir) + 723
10 com.adobe.Adobe Edge Animate CC 2014.application 0x0000e092 helium::App::MigratePrefs() + 1058
11 com.adobe.Adobe Edge Animate CC 2014.application 0x0000d4a9 helium::App::PreInitialize(exo::app::AppInitArgs&, boost::program_options::variables_map&) + 425
12 com.adobe.Adobe Edge Animate CC 2014.application 0x00046fb4 main + 532
13 com.adobe.Adobe Edge Animate CC 2014.application 0x000035a5 start + 53
Thread 1:
0 libsystem_kernel.dylib
0x91edf046 __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x95e5cdcf _pthread_wqthread + 372
2 libsystem_pthread.dylib
0x95e60cce start_wqthread + 30
Thread 2:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x91edf992 kevent64 + 10
1 libdispatch.dylib
0x90171899 _dispatch_mgr_invoke + 238
2 libdispatch.dylib
0x90171532 _dispatch_mgr_thread + 52
Thread 3:
0 libsystem_kernel.dylib
0x91edf046 __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x95e5cdcf _pthread_wqthread + 372
2 libsystem_pthread.dylib
0x95e60cce start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xa18e0c0c ecx: 0xbfffef6c edx: 0x91ede952
edi: 0xa094d1a8 esi: 0x00000006 ebp: 0xbfffef88 esp: 0xbfffef6c
ss: 0x00000023 efl: 0x00000206 eip: 0x91ede952 cs: 0x0000000b
ds: 0x00000023 es: 0x00000023 fs: 0x00000000 gs: 0x0000000f
cr2: 0x0041a7c0
Logical CPU:
0
Error Code:
0x00080148
Trap Number:
132Hi,
Please try recreating edge preferences, check the link below.
Restore preferences | Edge Animate
Apply this and let me know if helped.
Regards,
Devendra
Maybe you are looking for
-
Not able to see the values properly
Hi,, I am using Jdev 11.1.1.5. I see the value of "val.toString()" is correct and the Sql of the view is fine. Then what can be the reasons that no values come out in the popup? Why do I get "No data to display" within the popup once I clicked the li
-
Interproject relationships in P6
I am a relatively new P6 user; I have a problem I cannot solve. I want to view interproject relationships (predecessors and successors) either: --in the tabular view in P6, --exported to Excel, or --in a report. I suspect the tabular view within P6 i
-
How do I replace one vector mask with another?
I have a template for a web site that I'm trying to figure out as I learn CS5. The template has a vector mask created out of some writing that was converted into an object/vector mask. I would like to replace with a layer I created that has differe
-
Fx Print - not remembering settings though i saved them
Hello: I am not sure why, but the Fx Print Dialog is not remembering my settings. see screenshot: I desire the settings: > print selection only > and I choose print to PDF I am a bit bored of having to choose these 2 settings EVERY single time i prin
-
USB-GSM internet doesn't work on my new iMac but works in other Macs
Hi! I have a Sierra Wireless USB - GSM internet device and it works perfectly on my laptop. I just got my new iMac and I plugged the device in as normal... Once I introduce the USB modem, the iMac opens the installation program included on the device