I PAD NOT GETTING OPENED FOR WANT OF EXCHANGE ACCOUNT PASSWORD WHICH I LOST

Pl give me help/guidelines
vgkm

''""Enter your password for -- [email protected]@imap.gmail.com:"" ''
on imap & smtp servers:: Change user name from [email protected] to pvedxxxxx
Try another client. Perhaps [http://www.seamonkey-project.org SeaMonkey] (requires manual configuration of accounts).
Since this is IMAP your messages are stored on the server, so the following should not cause you to loose any e-mails. Try the following as a last resort.
Delete the account from Thunderbird and then add it; starting over from scratch.

Similar Messages

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work.

thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

How do I get my money refunded? I am not getting what I want from this, cannot email anyone for help, cannot get someone on the phone I can understand, and keep getting disconnected. I just want my money back.

How do I get my money refunded? I am not getting what I want from this, cannot email anyone for help, cannot get someone on the phone I can understand, and keep getting disconnected. I just want my money back.

"this" being what? You posted in the Workspaces.acrobat.com forum, which is a free service.
If you subscribed to any of the paid services see Cancel your membership or subscription | Acrobat.com online services

PF not getting deducted for the mid month joinees.

Hi,
The problem is coming in the PF deduction of the employees who have joined in the mid of the month.
For ex if an employee's basic salary is 7000 and the emp joined in the mid of the month , the system is taking PF from RS 3500 , where PF deduction is not applicable. Now the result is PF is not getting deducted for that month which should not happen.
So kindly guide me how to apply a check in the system so that it deducts the PF of those employees who are joining in the mid of the month and their basic salary is above Rs6500.

check
INPA4
INPA3
INPA2
INPA1
tables V_INPA1 check the configuration once
if u dont want f

Java.lang.Exception: Could not get name for DC project

Hello Experts,
We have a code which is downloaded from SVN repository.
I have imported the code from my desktop into NWDS and when I try to deploy it throws,
java.lang.Exception: Could not get name for DC project
I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
Kindly help me on how to fix the error.
Thanks, Swarnaprakash

Dear Swarnaprakash,
The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
the related package for DC is missing once check it after try to import.
Depending on which Java compiler preferences are set, you may see some
warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
Thanks & Regards,
Durga Rao.

CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC

Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
Partha

Hi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga

What causes "report could not be opened for writing . . ." message

"This report could not be opened for writing. Any changes must be saved to a new file." The version is CR 2013 SP1. Win 7 Pro. I'm new to CR and can't figure out why I get this error. I've verified all Windows permissions. It's an SAP error message - not a Windows message. Thanks in advance.
rd

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

Could not get response for challenge?

I could succefully use podcast capture to post video to groupblog.
But when I used command line "pcastaction groupblog", it always said that
"ERROR: could not get response for challenge"
But "pcast_post2groupblog" works well for me. I wonder why this happened?
P.S:
I've updated my server to the latest version.

If you look at the workflow, there is probably something in there like this:
<string>--otp=##Groups Administrator Username:Groups Administrator Password##</string>
That's a one time pad. I ran into this when troubleshooting our iTunes U workflow from the command line. To get my iTunes U stuff to work from the command line I had to generate a OTP each time, like so:
$sudo pcastconfig --add_access "token" --properties "iTunes U Shared Secret"
Except yours will be different because it's for group blog.... if indeed this is your problem. I only guessed this looking at the stock blog workflow, it uses an OTP.
Hope that was helpful and not way off the mark.

TP_domain_bd1.pfl could not be open for writing(invalid argument)

Dear All,
I have configure new the transported domin (STMS) and getting an error
TP_domain_bd1.pfl could not be open for writing(invalid argument)
Please suggeest how to salove this problem and i can see this flie there.
Regards,

Hi,
Did you configure the STms Porperly.
Did you Distribut the System
overview -> extras->press distrIbute and activate
Set the Transdir path in the new system
Check the domain controller system is accessiblefrom this system especially
(/sapmnt/trans) and should have read,write permissions
SAP user IDs:
SIDadm
SAPServiceSID
These IDs must be able to have full control of \sapmnt.
Thanks Rishi Abrol

Document could not be opened for editing

Hi,
I'm trying to open Office documents from SharePoint 2010 on Google chrome browser and it throws the below error.
"The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document"

Hi Vinoth,
Thanks for your question. This is the forum to discuss questions and feedback for Microsoft Office client. Since your query is more about operating on SharePoint side, I'm moving it to the dedicated forum for better assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=sharepointgeneralprevious
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Value property not getting updated for edit on firefox

Der Sir/Mam,
I am a selenium tester and my test fails on moxila due to following issue,
Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath.
The test case run fine on IE.
I want to identify the object by its xPath saying value = "Some value"
I can not check thousands of object by looking in to its value attribute property.
Thanks in advance,
Rohit

I'm not sure whether we can solve your question here. We are mostly supporting the released version of Firefox (Firefox 20) for regular use rather than old versions in a test harness. You might need to reach out to the [https://groups.google.com/forum/?fromgroups#!forum/selenium-users Selenium Users Group] if you can't replicate the problem in Firefox 20.

NOT Getting Values for LOCATION...on MultiProvider REPORT

HI All,
I have a MultiProvider on 4 cubes.All these 4 cubes having object LOCATION. I can see data in all cubes for LOCATION. I am running a report on this MultiProvider.
Problem:
I am not getting Values for LOCATION. Why?
What I did:
I checked all location objects of all 4 cubes @ MultiProvider level .
I didn't use any Infoprovider in Qry designer sections.
Please suggest. What is the reason how to solve..
THanks & Regards.
Sri.
Edited by: siri26 k on Dec 5, 2008 10:41 AM
Edited by: siri26 k on Dec 5, 2008 10:41 AM

hello,
in the identification tab of the MP,make sure you have checked all four checkboxes across the 4 infoproviders.
then in Listcube T-Code, select your MP,display the records based on selection inputs and see if location is populated.
If the data is not coming in listcube, then it will not come in the Query too.
Reg,
Dhanya

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

RBA GATP check is not getting invoked for Sales Order

Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit Dutta

Hi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala.

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

I PAD NOT GETTING OPENED FOR WANT OF EXCHANGE ACCOUNT PASSWORD WHICH I LOST

Similar Messages

Maybe you are looking for