I pad not recognized by pc ....... Help.... Please.

Hi to all my I pad 3 will not be recognized by my pc I have temporarily disabled my anti virus , and re booted both & made sure all drivers are up to date .
I have made sure iTunes is the latest version & changed USB ports ...... Man I'm getting frustrated now dammit ......what to do next????
I'm in need of some advice can any one help it would be greatly appreciated by myself .
REGARDS
NTBLTRT

Try putting the iPad into recovery mode.
First plug the USB end into the computer, but DO NOT plug the other end to. The iPad just yet. Second, turn off the device. Third, hold down the home button and then connect with the dock connector still holding down the home button. Fourth, your iPad will turn on, and a Connect to iTunes message will be displayed, and iTunes will detect your iPad is in recovery mode. Restore it with your backup.

Similar Messages

  • External hard drive not recognized... help please.

    okay, well here is the story:
    my iBook G4 had its stock 30gb hard drive in it and it was running extremely low on space. so i figured i didn't want to carry around an external hard drive, therefore i would buy an internal hard drive an install it. so i purchased a new 2.5" 80gb hard drive and called up the local apple store. they told me that although it was under warranty, that it did not cover hard drive installation. so i looked it up online and found step by step instructions to install the hard drive. so after lots of hard work and many screws, i installed the new hard drive successfully... but i still had this perfect 30gb hard drive. i thought maybe to save a few bucks i could turn it into a usb external hard drive. i found an enclosure for the hard drive and a usb 2.0 cable and plugged it into my ibook. it was recognized and everything. i put some files on the external hard drive and transferred it to another mac. this is where the trouble started. i plugged the hard drive into a PowerMac G4, and it was not recognized... so i tried it on a different mac. this time on a PowerBook G4, but no luck. this issue has been troubling me for a few weeks. but then i tried it on a similar iBook G4... and it was recognized. but i don't know why it was only recognized only on the iBook G4 (not the same iBook G4 it was pulled out of) and no other macs.
    does anybody have any ideas what we can do to get this hard drive to be recognized by other macs?
    any of even the smallest ideas would be greatly appreciated.
    thanks,
    tyler
    iBook G4   Mac OS X (10.4.3)  

    I can walk you through formatting the hard drive:
    1. Hook it up to an iBook that recognizes it.
    2. Go into your Applications folder, then scroll down to Utilities. Open Utilities and scroll down a bit and you should see Disk Utility. Double-click.
    3. On the left side you should see your internal hard drive and your external one. Each hard drive will have a sub-catagory with the partition indented.
    4. Your external hard drive will probably be the second catagory. Click it.
    5. In the center-top you should see the tabs First Aid, Erase, Partition, RAID, and Restore. Click the Erase tab.
    6. You should see Volume Format: and then a drop down menu, and Name: and a text box. Type in the name you want the external hard drive to be named.
    7. In the drop down menu, select Mac OS Extended (Journaled).
    8. Then, simply click Erase, watch the progress and it should be good to go!!
    Hope I helped you out. Oh, and it might be the enclosure...and also what OS's? Since it's USB it is probably using a USB Mass Storage driver. Mac-wise, if formatting doesn't help, I would get a FireWire enclosure because FireWire is much faster than just USB 2.0. Oh, thats nother thing...Is the enclosure Hi-Speed USB? If it isn't, I would definitely get a FireWire one...If it is, the PowerMac G4 doesn't have Hi-Speed so you're not taking full advantage..Just some insight
    iBook G4   Mac OS X (10.4.3)   512 MB Ram, CD-RW Combo Drive, 40 Gig HD, bought in October of 2005...
    Message was edited by: Hilary_Rose

  • Found an Ipod mini, my computer is not recognizing it.. help please!

    Hello everyone
    I had a 2004 20G Ipod, but it has since died. Lucky me, I found an Ipod Mini in the street! I connected the new Ipod to my computer and when I open Itunes, Itunes is not responding as having an Ipod plugged in. How can I get Itunes to recognize this new Ipod?
    Please help! Thank you!!

    Call Apple (1-800-myapple) and give them the serial number.
    They can notify the last registered owner and pass on your contact info to them so it can be returned.
    Thanks for being a good person!

  • Adobe Elements 12 not recognizing DVD drive, Help please!!

    In my Adobe Elements 12 for some reason when I go to burn, it saying no burners detected. Has anyone else had this problem and if so how can it be fixed. Thank you so much in advance.

    cricketsw08
    What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 using an opened project's Help Menu/Update? Please do so.
    Assuming a Windows compute for now.
    Is this "no burner found" situation described as "it never worked before" or "it worked before but not now"?
    If it has worked before, then I would ask
    1. Do you have iTunes on your computer? Have you recently updated it?
    If so, you might consider uninstalling both Premiere Elements 12 and iTunes, and then reinstalling only Premiere Elements 12. I would go through the scenario
    1. Uninstall Premiere Elements 12 and iTunes via Control Panel
    2. Do a ccleaner run through (regular and registry parts)
    CCleaner - PC Optimization and Cleaning - Free Download
    3. Reinstall of Premiere Elements 12 only.
    We will be watching for your results.
    Thank you.
    ATR

  • Nano won't charge/turn on/not recognized by computer help please

    i have a new nano, i installed the software, but when i plug the nano in the computer acts like it does not even recognize it, it won't charge, nothing appears on the screen, i tried to install software and connect to another computer doesn't work either i tried all usb ports on baoth computers but nothing help please

    i have tried just about everything i could find on the website i am just really confused and hoping it is not something i'm doing but since i pulled it out of the box nothing has came up on the screen and it will not charge when plugged into the usb the comuter does not even recognize

  • My ipod 3rd generation is not recognized by windows/itunes,please help

    My ipod 3rd generation is not recognized by windows/itunes,please help. Have tried restoring a number of times but did not work, any suggestions?thanks

    Start with this Apple support document.
    http://support.apple.com/kb/TS1369
    B-rock

  • My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

    My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

    It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
    You can try an SMC Reset.
    So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

  • I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

    I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
    Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
    I'm at a loss as to what to do. Any advice would be helpful.

    Shalese wrote:
    Have you ever tried the FW 400 to 800 adapter?
    I have used them on multiple occasions and they work just fine.
    Try this (maybe you already have):
    -Boot Mini with drive disconnected.
    -Do not connect drive but turn it on
    -wait a few seconds for drive to spin up
    -plug cable into the Mini then into drive.
    This is an old drive and may have some timing
    issues.
    I had an Acomdata drive a long time ago.  It
    worked fine with FW but USB was flakey.

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

  • Mail will not send messages. Help please: it receives OK but parks my outbound stuff in either Drafts or Outbox

    Mail will not send messages. Help please: it receives OK but parks my outbound stuff in either Drafts or Outbox

    Thanks for your answer. Apprciate it very much. Just prior to receiving your email, I got back online. However, as I had tried what you suggested (and a lot more as I am 'reasonably' competent), and had been so doing since yesterday afternoon, I do believe that what you suggested was correct - that it was my third rate ISP that was at fault.
    Nevertheless, many thanks once again.
    MJ

  • I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

    I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

    Your sister can go to https://iforgot.apple.com/ and see if she can recover her password.
    There is nothing anybody else can do.

  • I cannot upload an exel file from lap top to numbers in iPad, message says file not supported.   Any help please?

    I cannot upload an exel file from lap top to numbers in iPad, message says file not supported.   Any help please?

    File Sharing lets you transfer files between iPad and your computer. You can share files created with a compatible app and saved in a supported format.
    Apps that support file sharing appear in the File Sharing Apps list in iTunes. For each app, the Files list shows the documents that are on iPad. See the app’s documentation for how it shares files; not all apps support this feature.
    Connect iPad to your computer.
    In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
    In the File Sharing section, select an app from the list on the left.
    On the right, select the file you want to transfer, then click “Save to” and choose a destination on your computer.
    Transfer a file from your computer to iPad:
    Connect iPad to your computer.
    In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
    In the File Sharing section, click Add.
    Select a file, then click Choose (Mac) or OK (PC).
    The file is transferred to your device and can be opened using an app that supports that file type. To transfer more than one file, select each additional file.
    Delete a file from iPad: Select the file in the Files list, then tap Delete.
    or use dropbox

  • Toshiba External Hard Drive not recognized by computer. Please help!

    I was wondering if anyone could help me. I have an external hard drive and it will not show up in "My computer" when I plug it in. I have tried other USB drives and other computers. I am starting to think it is a hardware issue but I don't want to lose hope. The blue light is coming on when you plug it in but it doesn't blink and there is no noise whatsoever. Is there anything I can do to fix this issue so that I can recover the information on it? Thanks in advance for any help. It is greatly appreciated.
    Additional information: I'm not sure how old this thing is but the model number is HDDR160E03X.

    Same problem: I can't see my Toshiba PH3100U-EXB (Gen 2) external hard drive when I plug it in. After awhile I get this error message (see attachment): USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. FOr assistance in solving this problem, click this message."
    When I click it, I get a list of USB ports and devices, with Unknown Device in bold face. No real information there.
    Yes, I ran Disk Management and the Toshiba did not show up when I plugged it in and hit Refresh.
    Does it make a difference that the last time I used the external hard drive, we were in Windows XP and now we're in Windows 7?
    Please help! It's not just the backing up I'm worried about...it's being able to retrieve files later!
    Thanks!
    Attachments:
    USB-NotRecognized.jpg ‏28 KB

  • I now own a second hand unit ipad3 but I cannot activate because the original ID and password is not recognized by itunes. Please help me activate my ipad3?

    I now own a second hand unit ipad3 but I cannot activate because the original ID and password is not recognized by itunes.

    renefromnl wrote:
    I now own a second hand unit ipad3 but I cannot activate
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • Nano not recognized by Windows, help!

    I just got a second generation Nano, but whenever I plug it into my USB port it will say the following message:
    USB Device Not Recognized
    One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
    I had a first generation Nano that had no problems syncing with iTunes, but that one got corrupted, so I resorted to getting a new one.
    I have tried the Five Rs, erased iTunes entirely and redownloaded Version 7.3 by way of the Apple website, and I have gone to the Genius Bar at my local Apple store only to have them give me another Nano with the same results. I don't know what else to do! Please help!
    Dell   Windows XP  

    http://docs.info.apple.com/article.html?artnum=305136
    Even if no new drivers are available for your computer, read the last section and update your USB driver.
    Also: http://docs.info.apple.com/article.html?artnum=93499
    Try a drive letter Z and do this with all other USB devices other than your keyboard and mouse disconnected (this includes disconnecting your printer).

Maybe you are looking for