I pad not recognized in i tunes

i pad not being recognized in i tunes

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Similar Messages

My I phone and I pad are not recognized by I tunes anylonger. Why? Waht to do?

My I phone and my I pad are not recognized by I tunes anylonger (it used to be, I do not know waht happened). Why? What to do?
Help, please.

Hello Dora Lucia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

Ipod touch is not recognized by I tunes so cannot sync. It has worked ok previously

My Ipod touch is not recognized by I tunes when plugged in on a lead. It has worked previously but has just stopped. This means I can no longer sync.

Go though here:
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

My i pod touch is not recognized by i tunes. i have uninstalled and reinstalled i tunes as advised. the computer (vista) seems to think the i pod is a camera.

my i pod touch is not recognized by i tunes. i have uninstalled and reinstalled i tunes as requested by i tunes. but still no luck. my computer recognizes the i pod as a camera. HELP

iPod thinks it’s a Camera Windows
https://discussions.apple.com/message/10848866

2 of my i touch not recognized in i tunes tried everything they tell you to do hheeelllpppp

2 of my 3 i touch not recognized in i tunes did everything they say to do did it done it need real help

If the iPods have NOT been jail-broken, this will help. If they HAVE been jail-broken, buy new ones.

I pad is not recognized in i tunes

I am unable to get the ipad to be recognized in itunes; it is fully charged and connected via the usb cable provided. I have an iphone and have had not had this problem with that device. I tried shutting off/rebooting/resetting the ipad as instructed on the support page, but I can't get the red arrow to show up and can't get the apple logo to shut off when pressing the arrow and the home button. What next?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

My new ipod nano is not recognized by i-tunes

Just purchased Nano 6th generation. I-tunes not recognizing. Have gone thru all steps provided by support. Help!
Thanks!
Deb

What shows up on the iPod's screen when you plug it in? Are you plugging the iPod into a USB port located directly on your PC versus a USB hub?
What happens if you reset the iPod with it still connected to your PC? To do this, press and hold both the Sleep/Wake and Volume down buttons long enough for the Apple logo to appear.
Do you have any USB devices plugged in? If so, remove them all, minus your keyboard and mouse and reboot your PC. Then open iTunes and connect your iPod Nano once again.
B-rock

Numbers for dial pad not recognized connected to o...

Hi,
When being connected to a bank (fixed line) support number through Skype I have to choose an option in their systems menu through the dial pad to be connected to the right department. However their system is not recognizing numbers picked from the dial pad and asks again after which the call is disconnected.
Please advise?
Thanks in advance ErikT

You can uninstall current version of Skype from the control Panel and you can install Special Version.
http://www.skype.com/go/getskype-sse
and disable automatic updating of Skype.
In Skype, Tools >> Options >> Advanced >> Automatic updates >> Click on Turn off automatic updates >> Save Changes.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Shuffle not recognized by i-tunes

My daughter's shuffle is no longer recognized by i-tunes. When iI look in MY COMPUTER shuffle shows up as "removable disk". Any ideas

I have the very same problem and I am discovering a trend here. I would like some accountability from Apple on this. Its not a small issue- this is so basic. iTunes simply does not show my iPod - and I've owned 4 of them! I cant see a pattern to it but its really flaky, esp. for the worlds best selling MP3 device it is shameful really. That and Apples support is one of the weakest I've seen.

IMac powers up fine. Wireless keyboard and tracking pad not recognized. Power lights blink twice, repeatedly. Any ideas?

My iMac was off during a recent thunderstorm. When I power up the computer all is fine. However the wireless keyboard and track pad are not recognized by the computer. Their power lights blink twice, go off, then blink again. Any suggestions?

Turned out that I had to disconnct the keyboard from the new iMac in order to show in the old iMac.

I pad not recognised by i tunes

Need help to rectify this

Hi..
If you are using a Windows based computer, try here > iOS: Device not recognized in iTunes for Windows
For Mac here > iOS: Device not recognized in iTunes for Mac OS X

I pad not recognized by pc ....... Help.... Please.

Hi to all my I pad 3 will not be recognized by my pc I have temporarily disabled my anti virus , and re booted both & made sure all drivers are up to date .
I have made sure iTunes is the latest version & changed USB ports ...... Man I'm getting frustrated now dammit ......what to do next????
I'm in need of some advice can any one help it would be greatly appreciated by myself .
REGARDS
NTBLTRT

Try putting the iPad into recovery mode.
First plug the USB end into the computer, but DO NOT plug the other end to. The iPad just yet. Second, turn off the device. Third, hold down the home button and then connect with the dock connector still holding down the home button. Fourth, your iPad will turn on, and a Connect to iTunes message will be displayed, and iTunes will detect your iPad is in recovery mode. Restore it with your backup.

I pod not recognized by i tunes

Hello this is in regards with the i pod and i tunes. Recently had to make i pod into enable disk use for data now the options on the i tunes arent there because the computer things its a usb storage device. Now it wont let me change it back to music storage etc in options. Went to restore it the same thing happens. The computer usb hubs are working ok because they find the i pod as a storage device but the same thing happens. Go to restore as i said and ive updated it using the download nothing. Orange and green lights are flashing on it and now its locked me out. Added the new hardware with the driver for the i pod the same thing happens. It says no i pod connected or no i pod detected. This has gone on for so long now i want my i pod back please can someone help me. I tried to install and uninstall i tunes its same things HElp!!!!

Hi, Im 11 Years Old And I Have A Black iPod Nano 3rd Gen I Got It From My Mom On Chrismas And My Mom Put My iTunes On A Disk On Accedent And I Plugged My iPod In My Compaq Windows Vista Yesterday And i Put The Disk In And iTunes Pops Up, My iPod Is Plugged In. It Shows This Weird White iPod And Its Not Mine So I Eject It Even Tho Its Not Mine And My iPod Screen Says Its "Connected Eject Before Disconnecting" And On The I Tunes I Doesnt Even Show My iPod To Eject So I Cant Eject It I Cant Do Nothing I Love My iPod But i Think Its Broken....Please Help Me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless You If You Have The Solution ~Alexis behr

We have Topaz BSB signature pads not recognized in virtual environment

I'm wondering if anyone else is having this problem. Windows 7 recognizes the device. Device lights up, captures the signature and puts it on the document.
If you change the signature pad, the new one won't work. However, if you log in as another user that hasn't had a signature pad associated with it then the sig pad operates properly.
My theory is once a user profile has an established sig pad it won't accept another even though Windows registers the device. The program we are trying to use it with is Meridian Link.
Any feedback on this issue would be appreciated.

Hello Jack McM,
About hardware devices not working or not detected issue, please download and run the fix tool from the following KB to diagnose and fix the issues.
https://support.microsoft.com/en-us/mats/hardware_device_problems
Additionally, please contact the manufacturer as Rick Dee mentioned.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Keyboard number pad not recognized through bootcamp windows 7

Running windows 7 through bootcamp, the number pad on my keyboard does not respond.

I had the same thing as you (that my BT mouse & keyboard were working but then after a while they started to act up -mouse freezing on&off, keys sticking-).
In my case the 'before' and 'after' was actually running the setup on the Bootcamp Utility disk that contains all the Bootcamp drivers. There must be a rogue driver on there that messed up my system. I ended up doing a reinstall and only installing the bluetooth drivers (that are also on the same Utlity disk, but in the $WinPEDriver$ folder. This at least worked for me.
However, by doing so I did not get the handy Bootcamp utility in the lower left corner of Windows that allows me to conveniently reboot and switch from Win8 to MacOS. I am trying to figure out if I can install that utility separately without all the drivers being automatically installed as well

I pad not recognized in i tunes

Similar Messages

Maybe you are looking for