I Pad PS touch doesn't seem to do what is expected

Just downloaded I Pad touch , started tutorials only some worked for example STOP sign would not change color.
Also cannot select scribble tool .
Will I have to re download app.
Any help .
Black & tan

black&tan wrote:
Thanks for your help.
I have found the scribble tool,but still having trouble with tutorials ,have deleted app and reloaded but "STOP" tutorial changing colors etc still doesn't work
Did you follow the tutorial instructions step by step? You're supposed to first select the red color of the sign with the Magic Wand tool, then use the Color Balance tool under Adjustments to achieve the blue color.

Similar Messages

  • My Ipod touch doesn't seem to charge no matter what I do

    I need help my Ipod Touch doesn't seem to recharge
    I plug it on my computer it show's the logo when it charges I left it there for over a 1 hour but same result
    I plug it on my xbox the same thing it doesn't seem to charge on whatever I do

    sounds like it had an hardware or software clash and it's easy to fix it 2ways
    1st was isan soft reset no data on the ipod will be lost
    press and hold both the power and home for 15-30 sec's till the apple logo shows and it should reboot if that does not work
    2nd is an restore to factory setting all data u downloaded to the ipod will be lost
    this can be done in two way's
    first way it to connect to itunes click on the ipod tab and restore
    2nd way hold the power button for 3 sec's keep it held in now hold in the home button and keep both held in the screen goes black let go of the power and keep the home held in till the screen on the ipod will go blue and show the itunes logo with cdan up arrow and the usvb cable plug in to computer and open itunes and itunes willl start the restore

  • 1.burned a hole in my screen can I get this repaired?  2. Even though I have it set to open up to a blank screen, no web pages, my computer (safari) continuously opens with multiple safari sites open. It doesn't seem to matter what I do, it just reverts

    1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me...      "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks

    Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
    As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
    And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
    Good luck,
    Clinton

  • TS1702 I'm trying to down load iMovie to my ipad, but it doesn't seem to download, what do I do?

    Subject:
    I'm trying to down load iMovie to my ipad 2, but it doesn't seem to download, what do I do?

    You did, an iPad is a tablet.
    Anyway, no Flash based games like those cannot be played because iPad does not support Flash.  In fact, pretty much no tablets short of the ones running Windows 8 Pro will run Flash based games as Adobe has ceased development of the  Mobile version of flash.
    It would be better for Farmville and the like to move over to HTML 5 based games that cna be run on most tablets and smartphones

  • My iPod touch doesn´t react to anything what I do. Theres just a black background and this white loading sign but it doesn´t move. can anyone help me? thank you!

    my iPod touch doesn´t react to anything what I do. Theres just a black background and this white loading sign but it doesn´t move. can anyone help me? thank you!

    Oh Guten Tag.
    If your Home Button works, you should be able to reset - press the Home and Main button at the same time for 15 sec. Then press the main button for 2sec to have it restart.
    Do what I said earlier:
    I would advice you to go to the link I sent you above: https://selfsolve.apple.com/GetWarranty.do and ask for an exception.
    I don't promise that they'll change it but they may, mainly if the problem of the Home Button is going on since more than half a year (still within the one year warranty) and you just explain that you did not know that you could have changed it at the time and now it's completely dead.
    If you really want to recover all your stuff and are living in the US, you should go to the nearest Genius bar and see what they can do.

  • How can I bind danish letters to my shortcuts? After Effect doesn't seem to care what I put in my shortcuts txt file.

    As stated.
    I want to use the letters "æ" and "ø" to replace the brackets that the american keyboards use for trimming and cut at trim. It seems like such a nice feature.
    I've tried putting in unicode with UX00E5 format and so forth like I'm supposed to, but it just doesn't seem to work.
    How should I proceed, and what can I provide you folks with to help me with this?

    It would be fine if at least After Effects would honor my new bindings, but it just doesnt work.
    What could be common problems?

  • HT5622 In trying to update my iphone 4 my WHOLE system was erased, what do I do now? Also it doesn't seem to matter what I use for a password my phone won't accept it, says dismiss!

    My iphone 4 is gone! I was updating it via my laptop and when I came back to it everything had been erased, and I mean everything, now I have no activation, no phone and until just a few minutes ago it wouldn't accept any password I used, so now what do I do? Should I take my phone to Verizon and let them take care of it? I seem to be getting nowhere on my pc. Thanks for the help!

    Is your iPhone 4 GSM type or CDMA ?

  • Noise reduction (audio) doesn't seem to work - what am I missing?

    Hi,
    In a clip that I'd really like to use, there is a pervasive buzzing hum throughout, especially noticeable in long shots where there isn't any competing or overriding sound.
    I've read the instructions in the manual for taking and saving a noise print of the noise itself (there is a perfect segment in the clip to use for this), and for applying it to the entire clip by Selecting All and going to Process>Noise Reduction>Reduce Noise, then applying the saved Preset.  Also watched the video, which gave exactly the same directions.  The Noise Reduction line appears in the Actions tab underneath the clip name, and it looks like it's processed, but when I bring the HUD up and hit the Play button, nothing has been removed.  The offending sound is still there.
    If I click on the Noise Only box in the HUD, there is no sound at all, which seems to indicate that Noise Reduction hasn't actually been applied.
    I've deleted the file from Finder and started from scratch twice, but still can't get it to work.
    Obviously the Noise Reduction can't just "not work" - so as a new user of Soundtrack (3.0.1), what have I not understood?
    Thanks,
    Marg

    When you get to Process > Noise Reduction > Reduce Noise, usually a preset isn't the answer, but some manual fiddling. 
    Here's the way I approach this:
    1. When I set the noise print, I play/loop the clip and note the level of the noise in your meters. When I get to the threshold in the noise reduction window, that level will be the extreme highest threshold I use, only going lower from there.
    2. When it comes to the reduction, I check the Noise only box while I'm setting it, and boost the reduction until I'm getting noise, but not too much signal I want to preserve. If I hear voice in there, I'm doing too much. And I rarely end up going beyond 60%.
    3. Uncheck the noise only box, and listen to the signal with noise reduced to fine tune further.
    Remember this is noise reduction, not noise elimination. And, the STP tool is pretty good for what it is, but it's not anywhere near the best out there.
    Good luck, and I hope this helps!
    Matt

  • My photoapparel of myIPod Touch doesn't work anymore. What's up ???

    The photoapparel of myIpodTouch doesn't work anymore. It doesn't appear when i open it...?????

    Hi!
    Nice to meet you here. Im very new to here and joining here yesterday, so please bear with me. So since you say that your iPhone 5 home button not working or broken so time to call Apple Support or make a appointment at your location nearby Apple Store by calling 1-800-MY-APPLE so they could get a replacement for your phone so you would not have any this kind of problem anymore!

  • My line in sound doesn't seem to work, what's wrong with it?

    I've tried plugging in several mircophones with 1/8" jacks ( I think that is the small standard headphone ones.) The thing is none of these work. The problem is they all say they work with mac. I need to get one of these to work. I've  gone to the system prefs and go to the sound settings and I don't get any farther in my mission to get this to work. Please and thank you to the help I get.

    Hi
    First up when you go into Speech you are using the built-in microphone which has sufficient 'gain' in the circuit in order to work.
    When you plug an external microphone into your PB you are actually plugging a microphone into a 'line input' that is an input designed to accept signals at 'line' level not microphone level. So you either need to get yourself a microphone amp to boost the signal before the input to the PB or a 'line' level microphone. Same thing really except the amp is included in the microphone.
    Hope that helps.
    Phil

  • Tried making brush but doesn't seem to be what I need, is there something else I can do?

    I have a psd image of the top of a tree. I made a brush from this image and have played with it changing colors  etc., but I can’t get the look I want.
    Is there a way to keep the original image and be able to make one tree or drag to make a forest?
    Thanks,
    Del

    I don't use Illustrator. Painter has something called the Image Hose.
    On reflection you might get something reasonable with a Photoshop brush set to Scatter in the Brushes Panel.
    This is a maple leaf set to scatter:

  • USB Numeric Pad doesn't seem to work in "Screen Sharing" app.

    I have a MacBook Pro running Mountain Lion. Recently, purchased a new Targus AKP10AP USB Numeric Pad however, it doesn't seem to work in "Screen Sharing" app but seems to work fine in other apps. Screen\ Sharing.app doesn't seem to be able to recognise the numpad. If I connect a regular usb keyboard all seems to work fine - just the numpad doesn't seem to be recognized.

    First and foremost, XP SP2 is EOL on security updates. If possible I would strongly recommend Windows 7 instead.
    When you install XP, or Windows, fully upgrade first, then add Apple drivers, get it working fine. They say that 15 minutes is enough time to compromise a default XP install, and used as a "honey pot" to test what malware is circulating.
    I don't know about McAfee (I guess Google must) but for now or next time, try with just MS Security Essentials, free and gets high marks, it works.
    There are probably a lot of things to learn on a daily basis.
    But make sure what you install is current and compatible. And have backups and restore points so you can go back to earlier stable system state.
    And yes seems like the Windows partition or OS is not functional.

  • The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either. HELP!

    The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either, so I can't even turn it off since you need to "slide to power off." HELP! I'm leaving on Thursday morning for six and a half weeks, and I absolutely need my iPod with me. I was just at the Apple store today for problems I was having with ANOTHER product, and I don't really want to drive all the way out to where my nearest store is (which is not very near) if I can figure this out at home. My iPod was working totally fine earlier today and last night, so I don't know what happened! Please, please, PLEASE HELP!

    Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.

  • Have Ipod Touch 2nd Gen. I noticed that my music will not play alphabetically anymore. Don't know exactly when this occured. I checked all my settings so doesn't seem to be that.Apple no longer is upgrading this unit..Thank u for your help.

    Have Ipod Touch 2nd Gen. 64 gig. I noticed that my music will not play alphabetically anymore. Don't know exactly when this occured. I checked all my settings so doesn't seem to be that.Apple no longer is upgrading this unit..I use windows XP but don't believe this is an issue since i have read posts saying this is not the problem..right now am converting my higher bit rate music to see if that changes anything. I also turned off my unit and the next thing am going to do is a restore if this doesn't work. Anyone find a fix for this yet? I also see that this is not a unique problem to Gen 2 units and is occuring on newer units as well..thank you all for any advise...

    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • My itouch seems to be unresponsive after it turns on. It says slide to unlock, but doesn't seem to recognize any touch. I slide my finger and nothing happens.

    My itouch seems to be unresponsive after it turns on. It says slide to unlock, but doesn't seem to recognize any touch. I slide my finger and nothing happens.

    Try this...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

Maybe you are looking for