I Pad won't connect. I choose my own home network and get "unable to join"
My new Ipad 2 won't connect to my home network. I get an "unable to connect' error message. Frustrating.
i got the same promble.at home too.. i got no promble at work.. why?? someone help..
Similar Messages
-
HT1695 I can't connect my Ipad2 to my home wifi it says "unable to join rge network"
I can't connect my Ipad2 to my home wifi it says "unable to join rge network" eventhought my Iphone and MacBook are connected!!!
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
IMac won't connect to the to the wireless network and internet when a laptop is connected
When a windows laptop is connected wirelessly to my router and the internet my Imac won't connect. If the Imac is connected wirelessly first it turns off when I connect the laptop. the iMac has once given me a message about the laptop using the same IP address. Can anyine help, I have been putting up with this for a year now and it's a real pain. Any help appreciated Many thanks
JoelCheck the company that you get your internet service from. High speed internet through a phone service modem allows for one connection as the modem is controlling the IP addresses. If you add a wireless to this connection, your modem will still allow for only one connection at a time. The wireless modem should be "in charge". Call the internet service provider and see if they will walk you through how to give permission to your wireless to assign IP addresses and not the modem they supplied.
If your Mac and PC both want the same address, you can tell your Mac to use a manual IP address. Go to:
system preferences/network
write down the IP address, subnet mask, and router numbers. On dropdown Configure IPv4 choose "using DHCP with manual address". Now put back in all the numbers you wrote down except in the IP address box, change the last digit to a higher or lower number.
Now the PC will be happy with the IP it chose and the Mac will, also. -
My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end.
You can't change it - just try aagain.
https://discussions.apple.com/index.jspa
Where you find these options:
Notebooks
MacBook Pro
MacBook Air
iBook
MacBook
PowerBook -
my iPhone 4 won't connect to our WiFi at home, but will at other WiFi spots. However, my parent's iPhones work and connect just fine at home using WiFi. I have called and talked to several people and no one seems to be able to help me.
The two things to try first are renewing your network lease, forgetting the network and if that doesn't work to reset all networks. You might have tried one of these but I'll repeat the steps just to make sure.
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Renew Lease
If that doesn't work then
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Forget this Network
If that doesn't work
Settings > General > Networks > Reset All Networks > then reset your iPhone by
Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
I hope one of these will help. -
Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My iPhone 4s won't allow me to scan for any networks and won't even pull up wifi networks near by. How do I fix this?
Settings > General > Network > Reset Network Settings.
If that does not resolve the issue...
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried? -
Can I connect two apple tv on same network and same apple ID at a time ?
Can I connect two apple tv on same network and same apple ID at a time ?
Welcome to the Discussion Forums.
Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though. -
Connecting HP Laserjet P1102W to wireless network (then getting drivers!)
Hi,
My macbook pro and HP LASERJET P1102W seemed to be communicating just fine when I had snow leapard. Post update to Mountain Lion, problems.
I have gotten the printer to work when connected via USB, however not consistently. (Often it cannot recognize when paper tray is filled, cannot do two sided printing and has other issues perhaps connected to the fact that software is missing?)
I have read the documentation on HP site, noting that the only way to install drivers is via a network connecton and airprint which requires a network connection.
Not sure this is the right place to ask this, but I will for now:
How do I connect my printer to my network, which is a new home network as I just changed from DSL to Cable?
Note: I had not previously ever connected my printer to my wireless network and set it up to work with Airprint, though that is one of the reasons I bought it.
Once I do connect the printer to my wireless network, perhaps then I can try to follow the steps on the HP site http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=4142&product=4110396&sw_lang=
If anyone has experience with the above, I would love to hear it!
Final question: Is plugging the printer into the back of the new cable modem via ethernet or USB perhaps a way to put it on the wireless network? Not a convenient location, but if only alternative, I would try it.
THANKS!
AniDear Happy-to-Help,
I appreciate you logging in to help. I shall give this a shot in the next couple of days when I have more time and let you know how it goes.
I have been quite frustrated by the fact that HP says if the HP Laserjet P1102W has worked fine with Snow Leapord and one upgrades to Mountain Lion, all the drivers will be automatically upgraded/updated (or whatever the term). That has not been the case at all. It took quite a bit to even get my computer and printer to talk to one another via a USB connection—with none of the functions of the printer (as noted above) working properly to this day.
I hope your suggestion works. Will be back in touch to let you know.
Ani -
I've connected my device through a wifi network and i accidentally signed out my apple ID for imessage then when I signed back in i cant seem to get connected though my wifi connection is working just fine. can anybody help me?
I am having the same problem with my ipod nano
I have been trying since Xmas -
I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!! -
Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?
I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
Connect Fios to Cat5e home network AND Coax connections?
My Verizon fios system was recently installed. My home is wired for a Cat5e home network and standard Coax in all rooms. The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine. Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router. Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both. Any suggestions?
One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal. In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router). Or do I need to get another router from Verizon?DC_Sox_Fan wrote:
I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections. So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
Depending on how your house is set up this can be accomplished many different ways.
I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
====================================================================================
Error exists between keyboard and chair. -
iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode via itunes, it trys to extract the data and then says the phones memory is full- cant seem to get it sorted, any ideas? I have an ipad mini if that helps?!
Hey craigfromsheffield,
I would suggest that you use the following information in order to help you resolve this issue:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
Any help would be appreciated, thanks. I already have purchases linked to my existing NZ Apple ID, and will still be using them. However, once the US Apple ID is set up I will use that predominantly from both devices for any new purchases (and Apple
-
why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year
-
Web Service operation not in SOAP request
Hi There, I have a problem with the SOAP receiver adapter. I have created an external definition and uploaded a wsdl file. Several messages have been created out of the file. In my mapping I fill the message structure from the wsdl file. When I send
-
Validate f-22 and f-27 reference field
Hi, Which user-exit should I use when I want to validate for duplicate reference field value and fire a warning message when the reference entered by the user is already posted? Thanks. Regards, Vale
-
Dear Gurus, i installed a new machine. i install oracle db and then apply patch 10.2.0.4. on oracle leverl sql everything work fine. see i have restart the os/linux machine, after restart a few things noted. - listener did not start automatically - o