I paid for the entire second season of Homeland but only 4 episodes have downloaded. I have an email confirming my purchase and giving me a receipt number so what should I do now?
I paid for the entire second season of Homeland but only 4 episodes have downloaded. I have an email confirming my purchase and giving me a receipt number, so what should I do now?
If you click the Store > Check For Available Downloads menu option on your computer's iTunes does that download them and/or do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes (TV programmes won't show in all countries) ? If other TV programmes show there but not those then check to see if they are hidden : http://support.apple.com/kb/HT4919
If the above doesn't find any extra episodes (and I assume that there are more than those 4 episodes available in your country's store) then you could try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Similar Messages
-
I paid for the movie " mud" from apple store but now it says download error. What should I do?
You'll have to appeal to Apple and explain what happened: https://expresslane.apple.com/GetproductgroupList.action is a place to start.
-
Hey, my iPhone 5 gets switched off on its own. Couldn't switch it on immediately. Have to put it for charging and gets switched on... What should i do now for this??? when evr i go out this is one big problem i get... Couldn't use my fone.... Have to wait until i go back home...
Start here www.apple.com/ca/support/ or call 1-800-263-3394.
-
Hi ,
I fixed the wallpaper for the entire domain and It was applied to entire domain.
After some day, I have changed the domain wallpaper. Then some systems are showing New wallpaper and some systems are showing old wallpaper.
I have applied the gpudate /force command for those system who didn't get wallpaper.
Could you please suggest.Hi Srikanth,
First, please make sure that the GPO is applied to client properly.
To check that, please follow the steps below:
gpupdate /force
gpresult /h C:\report.html
Note: This procedure needs the privilege of the Administrator.
If the GPO is applied properly, please try to reboot the client.
If issue persists after reboot, please check if the following link is helpful:
The "Desktop Wallpaper" Group Policy setting is not applied in Windows 7 or in Windows Server 2008 R2
https://support.microsoft.com/en-us/kb/977944
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I don't understand how to get the remaining episodes of Downton Abbey. When I purchased Season 3, I downloaded all episodes successfully. However, the only ones I could watch were the ones that have appeared on US tv so far. Supposedly I would be notified when new episodes became available (supposedly after they air?). However, I still do not have episode 5, which has aired. How do I get it? I can't find any clue within the apple store or itunes.
What series of the programme is it, how many episodes have you downloaded, and what country are you in ? There are only 9 episodes in series 4 (8 episodes plus the 2013 christmas episode), so if you've downloaded all 9 then you have the full series
-
When I open Bridge it comes up with an error saying:
Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in the cache preferences to correct the situation
I have tried to purge it but it freezes, also how do I stop this happening again?Hi Mize,
I have been reading this post with great interest and have had exactly the same problem with Bridge CS4, when I downloaded from adobe the photography plan, which includes, Bridge CC and PS CC which I wanted to upgrade to. I downloaded as exactly what adobe said. All was well until I tried to open Bridge CC and got a message not compatible. Ended up downloading Mavericks OS and it worked with that. Managed to use Bridge CC for two days until I tried to download photos from my camera when my MAC Book Pro lost power due to battery problem. Just out of interest I will say while Bridge CC was not working Bridge CS4 did work. Bit strange I thought. Anyway having seen your thread I thought I had nothing to loose.
So thanks Mize I would like to thank you for solving my problem with this suggestion of new cache folder and hey presto ! it works with Bridge CC
Regards
Carl -
I will try this again, the dialog stated I did not have permission to access.
I refreshed FireFox because I was having some lag issues with the browser. After it was reset I now get the following:
"Looks like you’re using an older version of Firefox." FireFox
"You have been redirected to the basic HTML version because this browser is not supported. To use standard view please upgrade to a supported browser." Gmail
"Oops, your web browser is no longer supported.
YouTube works with a wide range of browsers. However, if you'd like to use many of our latest and greatest features, please upgrade to a modern, fully supported browser.
Find the latest versions of our supported browsers below." YouTube
I have version 36.0 and it shows my browser is currently up to date in the "About FireFox" (see attached photo).
Please advisehi gibfish, your useragent (the information the browser sends to websites to identify its version) - apparently mistakenly - shows you're on firefox version 3.6.11. probably some sort of toolbar or adware has overwritten it.
please refer to this article in order to reset the user-agent settings in firefox: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]] -
Unable to run time evaluation for the entire year...
hi experts,
I'am unable to run time evaluation for the entire year, even though mentioned the date as Force calculation as of : 01.01.2010
and evaluation upto date : 31.12.2010. when time evaluation is run , the log is only run for Jan 2010.
Maintained IT2011 from 01.01.2010 to 31.12.2010
IT0050 from 01.01.2010 to 31.12.9999
IT0003 : PDC recalculation : 01.01.2010
Kindly advise.
Regards
PammiCheck if Time Management status is 1 or 9....
If it is 1 then it would not run for the entire year..It would run only till today. If it is 9, then the TE runs for future also...also check if in the schema it is activated for future runs or not... -
Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?
Go to Geekbench
http://browser.primatelabs.com/mac-benchmarks
and check out the relative values for the system you're currently using versus the one you're going to buy. My guess is a fullly spec'd MBP Retina will do the job, but you're undoubtedly better qualified than anyone on here to tell what kind of a machine you need. -
"An error has occurred" downloading Mountain Lion. What should I do now ?
"An error has occurred" downloading Mountain Lion.
I accidentally closed the application app during download of Mountain Lion and now it shows "An error has occurred"
In the application app there is a grey button next to the error message, if I click on it nothing happens
Mountain Lion is showing in Launchpad as waiting, if I click on it, nothing happens
What should I do now ?Launch the App Store.
From the App Store menu bar (top of your screen) click Check for Unfinished Downloads
If that doesnt help, try here > Mac App Store: How to resume interrupted downloads -
I purchased an upgrade inside the free app, however it shows I paid for the free app & now I can not download the full version. What should I do?
Thanks!
KristineFinish the download on your computer in iTunes and then sync the app to the iPad and then delete it. You will probably have to let it fully download before you can delete it.
You can try restarting the iPad and see if the download will resume - Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Yoy can try this as well and see if the download will resume. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Look in iTunes and see if there is a pending download in there that might be causing the delay. If there is a download there, try to finish that one first. -
I have creative cloud, I have photoshop and lightroom current versions installed - I was using the trial period. I paid for the 9.99 a month and now I'm trying to figure out how to update this.
You need to uninstall the trial applications and reinstall from the CC app.
-
after my 1 month trial verion expired, i paid for the Adobe XI month to month sub, downloaded the trial version again from the cloud and now when i try to use the month to month paid version it says my trial version has expired, an clues on how i access my paid version?
sign out and then back in to your cc desktop app, Sign out, Sign in | Creative Cloud Desktop app
when signing in, use the same adobe id you used to subscribe. -
I have paid for the app for 2 old masters puzzles. Says they are complete but will not open. What is the problem?
Thanks
RobinDoes this happen immediately after you log in? If so, one of your login items is probably causing it.
-
Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)
Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)
Maybe you are looking for
-
Error in account determination ( Created a new tax code for CST 2%)
Dear friends, iam facing a problem while doing vf01.the error is o account detrmination for jn7 which is for condition type CST. My customer master is also checked I have maintained the account key and GL a/c for ers,erl,erf,jn6,jn7 etc in tcode vkoa
-
Is there any way to remove "stitching" in Illustrator at all?
I've encountered a very common problem with thin white lines appearing in some of my vector imagery in Illustrator CS5.5. Like with most stitching errors, I get this when using shapes with gradient transparency. There's also some shape distortion hap
-
I know this has prob been covered a million times BUT I cant find the answer or solution. I am new to FCPX and I shoot video on canon xa10 using internal HD...When I go to import into FCPX the files are empty?? Why?? I can see the files on my HD but
-
Satellite L100 will not boot up if wi-fi is enabled
Hi Starting from the beginning, yesterday for first time my husband connected his Satellite Pro L100 PSLA4E to an LCD TV using a s-video cable. Everything seemed to work fine but thebackground on thedesktop had vanished, there was just a plain white
-
Local client copy error - Table "BKPF" not edited due to excessive number
Hi, I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 - === 2 ETA163 Table "BKPF" not edited due to excessive number of errors 2 ETA