I phone 4 backlight only, phone rings but touch sreen dosent work, help please
right, about two months ago my phone was just black with a backlight.the phone still rung and the touch still worked, i was going to take it to the shop but diddnt have time and just forgot about it and got a new phone. now its the same but i cant touch the screen to unlock it to back it up. it has been smashed twice but fixed could that be to do with it...any body know what has happened or how to fix???
The LCD display has failed. From the way your post reads it's time to let go of the past and move on with the future.
Hope that helps
Similar Messages
-
All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!
Ok. You don't have to select your number. Just check your email under your "grey" number and then at the bottom of this page you will see the option "Start new conversations from". Select your number.
-
my itunes won't recognise my ipod touch, I've had one before and there was no problem, but this one is brand new, my computer recognises it but my itunes doesn't, help please? I've followed the steps on the support but it won't work, I've updated my iTunes and everything..
So yu tried everthing here included here including removing and reinstalling all the Apple software?
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Next I would try another computer to rule out an iPod problem. -
Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPalFile Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator] -
Wi-Fi is on Internet works perfectly fine but BBM is not working, Help Please
Hello i'm abroad right now and eyesterday the phone was working fine and all of the sudden bbm wasn't working but everything else is fine and i have almost full bars but my connections look like this
Mobile Network x
Wifi (TIPIA) -
Bluetooth x
The day before beside the Wifi i had a check mark and bbm worked fine but not today.
does anyone know why?
please helpnothign my bbm just wont work i doesn't have a chekc mark beside the wifi connection page...
it is still showing like this:
Mobile Network x
Wifi (TIPIA) -
Bluetooth x
(internet still workin fine)
yesterday it was like this
Mobile Network x
Wifi (TIPIA) check (yes)
Bluetooth x
(both BBM and internet worked perfectly)
is there a setting i have to change or that i may have changed -
I have just downloaded a £55 app but it doesn't work, help please???
I have just downloaded an app but when I open it It just comes up with a white screen. I have no idea how or where to go to try and reinstal it, at £55 I do not want to have to re-pay for it, can somebody help me please.
Hi..
Helps to tell us which app you downloaded ...
You can try re downloading. You will not be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
If that didn't help, if you have anti virus software installed, disable that.
Turn off the Firewall in System Preferences > Security & Privacy
If you have an app called Little Snitch installed, that can prevent apps from downloading. -
HELP MEEE!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HOw do I switch from headphones back to regular volume.if I use my headphones I cannot get the volume to work for incoming calls the phone rings but I cannot communicate
Do you have a screen protector on? At times of poorly made it will cause problems with the sensor for the screen lighting
-
How do I turn off Headphones? My phone rings but all other alerts have been changed to headphones, so no sound. (tried sounds, settings, manual side buttons)
As was already said: the camera's interpretation of the raw data is just one interpretation, and not the same as Adobe's. Don't confuse it with "exactly how they were shot", as this doesn't apply when shooting Raw. Granted it IS the manufacturer's interpretation, but you wouldn't be shooting Raw and using Adobe Camera Raw if you thought the manufacturer was always right.
One thing nobody has mentioned is Adobe's "baseline exposure" compensation factor. Camera Raw adjusts the default preview exposure by a factor of EV based on their measurements of the camera sensor. My present camera is boosted by 0.35EV and my last camera by 0.5EV. There is a way of determining this using EXIFTOOL, but I can't remember how to do it offhand. For the last few years, I have adjusted my own Camera Raw defaults by reversing this compensation, so it more closely matches the exposure I was expecting.
EDIT: here's the procedure, if you're interested. Re: Baseline Exposure -
My screen is not displaying it is black. The phone rings but nothing displays, The same is happening when I receive a text.
Hi there Mrunner,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
-Griff W. -
When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!
I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty. -
i was updating my iphone 5 to ios 7 but i cancelled it by forcing a shut down as there was not much battery left so now its in restore mode and i cant restore my phone now it says error 3194 and ive tried the sudo code but it still doent work help?
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these steps for assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow the advanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!
Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.
-
I just bought a iPhone 4s from someone on-line, everything is working correctly however i cannot connect to any wifi, it says that it is unavailable, i know that it could be the wifi chip damaged but the phone is in almost perfect condition. Help please?
Help with what? If the WiFi radio is broken, there's nothing any of us on this forum can do help you. Either go to Apple and pay for an out of warranty replacement, or find a 3rd party repair shop and get the phone repaired.
Maybe you are looking for
-
How do I manage apple id on multiple devices
How do I manage Apple ID on multiple devices. I changed on my iMac but can't change on my iPhone or iPad.
-
Using skype on skype wifi while in Japan for calls...
I am subscribed to us and canada plan here in the U.S. I always call Japanese number from here with skype to go number (U.S. number) and it will charge a couple of cents/minute. If I take my iphone to Japan and call on skype wifi, does it still work
-
UCCX 9.0.2 set agent to "Ready" after initial login
I am trying to get agents to go "Ready" automatically after login. I tried to do a workflow macro in "Agent Managment Workflow" - Start-Up but it doesn't seem to work. [DELAY] 17000 [APPLICATION:AGENT_DESKTOP=NOT READY - CISCO AGENT DESKTOP] [CONTROL
-
Hi. I just created a photo book with 100 pages, but I have still have several hundred unplaced photos in my book. I want to create another book using only the unplaced photos from the first book. Does anyone know how to do this? Thanks.
-
Photoshop Elements 10 menu' in Italiano
Ho acquistato in un negozio in Italia Elemets 10 da caricare con DVD. Dopo averlo installato ho constatato che non esiste il menu' in italiano. Esiste un aggiornamento/applicazione che mi consenta di visualizzare le funzione del menu' in italiano???