I phone 4 when face timing i can hear people but they cant hear me

i phone 4 when face timing i can hear people but they cant hear me. help

Having similar problem here only the other way around. The people on the other end of the phone can hear me but I get no sound at all. I can communicate if I plug in the earphones or put the caller on loud speaker. When this fault is occurring I also lose most sounds from my phone. Instead of getting an incoming message noise it only vibrates. I also lose all keypad and lock etc sounds. This problem comes and goes and is truly annoying. The phone is still under warranty but it will be an inconvenience trying to have this problem rectified. It would be interesting to know if it is a hardware problem or another problem created by the upgrade to this os system to 4.1. Either way it is a problem that Apple need to look at urgently as it appears to be fairly wide spread from my research on these boards. I suggest everyone who is having this problem also reports it via the feedback page on the apple site
Message was edited by: Shemax

Similar Messages

  • Hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

  • I have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    Hi gallimore1998,
    It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • When i facetime someone, I can hear them but they cant hear me. What should I do?

    When i facetime someone, I can hear them but they cant hear me. What should I do?

    Hi 196000,
    Welcome to the Support Communities!
    The following article offers some troubleshooting steps for this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Cheers,
    - Judy

  • I can hear caller but they cant hear me

    Hi
    When I receive a call on my iphone 4s i can hear the caller but they cant hear me.
    When I call the caller back there are no problems.

    i dont want to use the earphone with a mic though, i want to be able to receive and to make calls without the earphone with a mic. but my problem is, there is no sound at all coming from the speakers that you put near your ear when your calling

  • TS3406 when i call someone i can hear them but they cant hear me.viber and facetime perfect?

    when i call someone i can hear them perfectly, they cannot hear me. facetime and viber ssuld perfect??

    Hi micheleforde!
    I have an article for you here that will help you troubleshoot this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • My iPhone 3G can make calls and i can hear them but they cant hear me......

    I just got my iPhone 3G yesterday and when I make calls, that person can talk to me and I can hear them, but when I talk they cant hear me. It has nothing to do with the mute button though. But if I use the headset or a bluetooth device I can talk to that person. How can I Use the phone itself without a headset or bluetooth. HELP ME PLEASEEEE!

    Sorry to bump a really old thread, I'm a bit behind the times considering I just got my iPhone on Monday so please excuse...
    I'm having the same exact problem with my new iPhone but I bought mine at an AT&T store, can I still take it to the Genius bar to be replaced?
    I dread going to the AT&T store like no other, but all of the LA and OC area Apple stores had been out of the 8g iPhone for days and I couldn't wait any longer to get one. I'm hoping this doesn't mean I have to take it there...
    Thanks in advance

  • No outbound sound on skype i can hear them but they cant hear me

    I have a satellite l505-s6946 laptop ,skype will only let me hear them they cant hear me ,windows 7

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails and your model has a removable battery, then you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works. If your model does not have a removable battery, substitute holding the up/down arrow keys until the device fully shuts down.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Whenever someone calls me i can hear them but they cant hear me

    most of the time when i receive a call i am able to hear the person on the other side but they cannot hear me at all. Restarting the phone used to solve the problem...but now even that doesnt work... help!!!

    hey i had the same problem, look and i fixed it just slightly tighten the 2 screws on the bottom of the phone with the tip of the knife or a small screw driver!! and now my phone works perfectly
    guys it really worked trust me

  • Have an iphone 3gs on 5.01 unlocked, was working perfect untill yesterday it started pl;aying up only makes calls when it feels like it and when i get a call out or in i can hear thm but they cant hear me, the mic is working cause i can make a voice note,

    need help

    Have you restored as a new device and tried your phone before you add any apps back?  If you do this and you're still having problems, then you are having a hardware malfunction and will need to bring your phone into Apple for evaluation and possible replacement.

  • When I make a call I can hear the person I call but they cant hear me. But when I put my phone onto loud speaker they can hear me then ?

    Hi I have recently had a problem with my Iphone 5. When I make a call to someone I can hear them fine but they cant hear me unless I turn it to loud speaker then they can hear me, I can still talk to siri and on face time but not for a normal call. What would be making this happen ???

    Hi Kel134,
    Welcome to the Apple Support Communities!
    I understand that you are having microphone issues on your iPhone when you place a call to someone and they cannot hear you unless you activate the speaker function. In this situation I would recommend the steps in the following article to help isolate and resolve the situation. 
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Resolve the issue
    Follow these steps, testing after each.
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
    Dirt or debris
    A screen protector or case
    When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
    Turn the iPhone off and then on.
    Update to the latest version of iOS.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    I hope this helps,   
    -Joe

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • When i make a call i can hear perwson on other end but they cant hear me,i works breifly if i turn phone on

    I can hear the person on the other end but they cant hear me,sometimes i works sometimes it does not,any ideas?

    Try this
    Updated tests here: https://discussions.apple.com/thread/5136434

  • Phone cuts out in middle of conversation, I can hear other person, they cant hear me, any clues?

    Phone cuts out in middle of conversation, I can hear other person, they cant hear me, any clues?

    I had the same problem with mine.  It had a faulty proximity meter.  When in a conversation, the screen should go black when it senses it's near your face.  Test it by calling someone and placing your hand over the phone.  If it doesn't go black, you may have the same problem.  When that happens, your cheek can hit the mute button..

  • TS3406 When i answer a call they can hear me but i cant hear them until i put it on loudspeaker . How can i resolve this

    When i answer a call the person on the other side can hear me but i cant hear them unless i put the loudspeaker on. So how can i resolve this

    Hi Bignut69,
    I recommend the troubleshooting steps in this article if the microphone on your iPhone is not working:
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    You can find these steps and more information here:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best,
    Jeremy

Maybe you are looking for

  • Partner Change Event not working

    Hi, I have created a WF which has start event as Attribute change and Partner Change. 1st when i save the details on UI the WF triggers but next time if i add any partner functin on UI only partner function and no change in attribute the WF does not

  • Error while running creating repository in OWB

    Hi All, I am facing problem while creation of repositiory in OWB, at 31% OWB repository creation gets failed. Error message is "Process element SeedData.xml" 36% The warehouse builder repository Owner installation failed on user REP_OWNER INS0017: In

  • My trash can shows empty and other issues with it...

    Ok basically, if i delete anything on my mac it should go to my trash can right? Well i have a few problems with that as follows: 1. Everytime i delete something or move something to the trash it asks me to enter my password everytime, then deletes i

  • How to send an email with from address not as a SAP user id

    Hi, sender = cl_sapuser_bcs=>create ( pv_user ). I am using the above piece of code to send an email. In the method "CREATE" , I CAN PASS ONLY THE SAP USER ID. But i want to pass the email address (user) which does not  a SAP user id? how to do this.

  • Help with Blackberry

    So i bought 2 blackberrys Curve's from ebay, cant seem too get them working on internet, bbm etc, been told i need a blackberry internet service, problem is i'm on a three contract simcard and dont seem too know if its possible and how, and if i do g