I phone 4s goes into continual boot after 8.1 update

I am wondering if I am the only one having this problem. I have a 4s that I would like to keep running at least till my 6+ shows up. Ever sense I update to 8.0 I lost the panorama feature, and now that I have upgraded to 8.1 my phone continue to reset over and over again. I was able to remote wipe the phone as I have find my I phone and restore from back up. Things went well till my apps auto updated right as the restore was finishing. Now after 20 min of the loop it just now popped back to normal. This is not an old phone I replaced it through apple in May. Out of warranty replacement. This is crazy and I don't think it is just my phone I had to restore my wife's 4s after the 8.1 update also. She chose to leave all the apps off just to make sure she had a phone, and to set up her 6+ off of my now questionable back up.

Hi!!!
I believe I didn't understand your issue. Have your iphone been stuck in bootloop. If so, have you managed to restore it??
I'm asking this because my iphone 4s is having the same problem. I had the IOS 8.0.1 installed and for no apparent reason it entered in a bootloop state. I'm trying to restore it to the newest iOS but iTunes always returns error 9.
After reading other iPhone users and Apple experts, I believe that this is concerned with hardware malfuncion and not what they say about this particular error. Moreover, most of the cases seems to be with iPhone 4S using some ioS 8 version. Strange...

Similar Messages

Has anyone else experienced the iOS going into recovery mode after the latest update?

I had a notification stating a update of iOS 6.1.1 was available. I started to install the software OTA. after about 10mins, my phone turned off, and when turned back on, showed a picture of a cable and the word iTunes.
I plugged it up to my computer which told me it was in recovery mode. its reinstalled the new software but I've lost everything. Photos, Videos, Apps, notes, Music, Messages.
I back it up regularly, but when i tried to restore the backed up file, Ive still lost a 80% of my photos, no videos have been readded, and all my Apps I have had to redownload from the App Store.
Needless to say, it's things like this that make me really wish I had re-upgraded to an Android!
Has anyone else experienced this issue with this update?

I am also experiencing the same problem, but strangely only with my iMac!
iPhone and iPad running iOS 7.0.6 working OK
MacBook Air running OSX 10.9.2 (and Intel HD Graphics 5000 1024MB) working OK
iMac running OSX 10.9.2 (and NVIDIA GeForce GTX 680MX 2048 MB) working NOT OK
Not sure if this may be a problem with NVIDIA graphics after upgrading to OSX 10.9.2?
When I try to connect to AirPlay Display via my iMac, it says it's connected, but my TV goes into a full black screen mode. Despite it says it's connected to AirPlay display, I cannot actually change from Extend Desktop (my default) to Mirror iMac for example, as it doesn't allow to select it. Also, if I "open display preferences" I don't have any "Arrengement" tab as I have on my MacBook Air where it is working ok.
Thanks.

HT4061 My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

Maybe you should consider that new phone recommendation you got...
Who told you that?
Is the phone jailbroken? Was it hacked to unlock it? Has it been physically damaged? Did you get it wet?
You haven't provided anywhere near enough information.

Mountain Lion going into safe boot

Hi, I downloaded mountain lion and it started intstalling. When it restarted to install the upgrade, it starts in safe mode..i tried shutting down and restarting few times but every time it starts installing the updates and then goes into safe boot mode..
Note: yesterday I got a problem with my key board, there was a spill into my mbp keyboard and most of the keys are not working. Right now i am using my Bluetooth keyboard now.
Pls let me know how to fix this safe boot issue with the installation.

A problem with a keyboard will cause your Mac to startup in Safe Mode.
If you can, use a USB keyboard instead of Bluetooth.

Mac won't boot after the latest update. It is loading the update and suddenly shuts down

My MacBook Pro won't boot after a minor update. The update was all fine and my Mac acted like it used to but when I tried to boot my Mac it just loads the the update then goes back to the Apple logo and then shuts down.
I hope that someone has got a solution because I do not want to restore my Mac for the 4th time.....

Hello JonasHallund,
We've an article that contains information and steps that can help get your MacBook Pro to boot again.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Cheers,
Allen

So my phone is plugged into the computer for a software update and the update went halfway through and hasnt made any advancements. how do i get my phone back without losing anything?

so my phone is plugged into the computer for a software update and the update went halfway through and kind of stopped. it says its still updating but I cant figure out how to stop it and just get my phone back. how do i get my phone back without losing anything?

See Recover your iTunes library from your iPod or iOS device.
tt2

ITunes goes into (not responding) when tries to update library

How can i get my mac around this problem? iTunes goes into (not responding) when tries to update library

I just posted with the same question

Imessage only displays the phone number instead of the name after the last update. any idea how to fix it?

imessage only displays the phone number instead of the name after the last update. any idea how to fix it? All messages had the names displaying correctly before the last update.

From the menu bar, select
 ▹ System Preferences... ▹ Language & Region
From the Region menu in the window, select one of the preset regions. If one is already selected, choose a different one, then change it back. Close the preference pane and test.

My Iphone 4s goes into recovery mode after doing the IOS 6 update.

I just tried doing the IOS6 update and after about 2hrs into it my phone goes into recovery mode. The Itunes icon appeared on the phone. When i connected it to Itunes, I tunes said i had to restore and update my phone.
BTW my son did the update in about 15 minutes i tunes says my phone will take 7 HOURS!!!
HELP!!!!

Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
I hope this will help those whos undergoing this horrifying iPhone problem.
Just additional info.
Issue: Sticked with USB & Itunes Logo during upgrade attempt to iOS 6.0
Iphone 4S (iOS 5.1.1.(9B206)
32 GB
Official Factory Unlock
PC-Win 7 Home Premium 64bit
iREB Download Link:
http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads:
Message was edited by: johnsawan79

IPhone 3G goes into Recovery Mode after every restore

Every time I restore my iPhone 3G, it goes into recovery mode right after an error-less restore has been completed. Yes, I've tried using tools such as TinyUmbrella and RecBoot and iRecovery. The device was not jailbroken when I tried to update it to 4.2.1 yesterday. They all reboot the phone and just throw it back into recovery. I have no idea what to do. Searching is futile. I thought I might as well do what I almost never do and ask these communities for support.
I hope they don't disappoint.

I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
1) Download and install TinyUmbrella for your PC/Mac.
2) Make sure iTunes isn't running and connect your device via USB.
3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
4) Profit.

Why iMac goes into coma booted in Ext HD Tiger hot plugging USB cable?

Folks:
Had this question posted as "iMac goes into deep coma w/hot plugging USB cable??" on the "using your iMac G4" forum, got 63 views but have not received any replies there. Since I was booted up in Tiger 4.11 on my FW Ext HD, thought I'd try to post over here to see if I get some sage advice from this forum.
Was trying to experiment with ways to get my scanner to work if I finally decide to upgrade my iMac to 10.4.11 by booting up Tiger using External HD by firewire and then plugging in the scanner after that. As soon as the USB plug touched the port the computer "went black"--total crash. Took about 5 mins before I was able to resuscitate the machine with the power button. I repeated my experiment in the same manner and down she went again, down and out . . . . Tried to start it for a few minutes, nothing, went to dinner, came back, nothing. Finally, unplugged it for a minute and then she came back to the land of the living . . . .
When I restarted from the 10.1.5 internal HD I plugged the scanner in and opened the scanner app in Classic and all was fine. I like being able to use Classic apps and if it wasn't for the fact that my Camino browser is starting to crash when browsing the newer websites I'd have no reason to upgrade. Even if I get a new Intel computer I won't be able to boot back into the Power PC operating systems, right?
Anyway, would like to know if it is "well known" that you can't hot plug peripherals when booted up in external HD or if this is a "special problem" that only I am experiencing?
Thanks,
e.e.p.

Since the issue could be in the peripherals or the computer involved, this could
be a hardware failure of some kind. If you have replaced the USB cable, and all
other variables have been double or triple-checked, even a problem with the
computer's power supply could be at fault. Or there may be a partial short in one
of the electrical circuits involved with this USB cable and whatever it supports.
Please re-explain these other operating systems and their locations, since the
10.1.5 and other stuff seems irrelevant. Unless there is a hardware failure.
And that is a possibility.
If you got an old early model Intel mac with 10.4.11 running in it, that would not
support Classic OS9 based apps directly. However, there are several sources
for replacement parts and also complete repaired and guaranteed PPC Macs.
There are limits in some, in what OS X versions and practical uses they may
allow now, with less online support & dwindling apps to run on the older OS X.
You may be able to look into the system logs and crash reports, via Console
Utility, to see what kinds of errors reports & crash logs the computer created.
Also, in System Profiler, there should be a Software> Logs section and it may
have some recent activity logs there. You can compare log creation times with
the intervals of these failures and see if a report matches your experience in
a real-time error log or other.
Is this USB port where the failure occurs, located in the external drive enclosure
or in the computer attached to it? What kinds of external FireWire devices and
USB devices are involved? Have you ran just the bare-bones computer & seen if
there are problems in just that, by itself? Troubleshooting invites checking it alone.
If there is an overload of some kind regarding a power supply failure under
only some circumstances, you could try a powered USB hub when using
several items attached to the computer; so it would carry that load.
Anyway, it sounds like a magical mystery tour is in store, in there.
Good luck & happy computing!
{ edited }

IPod touch 1st gen goes into recovery mode after shut down or lock

Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

Welcome to Apple Discussions
Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
http://support.apple.com/kb/HT1808
As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

How can I stop my phone from going into the lock screen while talking on it? (New issue with ios 6)

Prior to ios 6, I could talk on my phone and have the mute button available. Now it goes into lock mode while speaking on the phone. This is terribly annoying when on conference calls and you want to mute/unmute, or just hang up a call. I now have to swipe to unlock, go to phone, and hang up or unmute. I've tried upping my timeout, but that just delays the inevitable.

Yep, it's a pain. What's even more concerning is that at the Genius Bar, he was trying to tell me that this is the was it was supposed to be, so they probably fixed it in OS 6. He said it is for people that are using "Bluetooth" and want to keep the phone in their pockets". Ridiculous! What compounds the issue is that the Apple Reps have no clue as to what's going on, and either do the senior tech's on the phone. As I said in my message, this has made it very cumbersome, and makes it very difficult for those who need to use wired headsets.

[Solved] Gnome 3 goes into fallback mode after graphics card upgrade

Hello,
I have been using Arch with an AMD Radeon HD 4670 and open source drivers for the past couple of months together with Cinnamon, everything was working well. Recently I have upgraded to an AMD Radeon HD7750 which is not supported by the open source drivers, I have removed the open source drivers and installed the catalyst-total package from the AUR. After doing so Cinnamon failed to start and gave me an error, I have decided to try Gnome 3 and it just goes into fall back mode which I assume Cinnamon cannot work with.
XFCE however works. There is one small issue with it though, the left and right borders of windows are missing (borders of context menus are missing too). Other than that it seems fine however.
What is the problem? Is Gnome 3 support for Catalyst just simply very bad? or have I installed something incorrectly?
Any help would be greatly appreciated, thanks.
EDIT: Catalyst 12.9 recently came out and a corresponding catalyst-total package was released, intially it broke my X install but after re-running aticonfig --initial it worked fine. I have uncovered an option in the Catalayst Control Centre which lets me use two screens without Xinerama, doing the following: Display Manager -> Multi-display -> Multi-display desktop with display(s) 1, allows me to use compositing and my two screens, and I am still able to drag windows between the screens. After I have saved these new settings I have reloaded Cinnamon and it worked perfectly.
Last edited by dom96 (2012-10-15 15:41:28)

Another thing that I have noticed is a strange X error when launching 'xsane': https://gist.github.com/7f28ac7cd393c8671ed3

Macbook pro goes into sleep mode after few minutes and won't wake up

Since yesterday my MB pro suddenly goes in sleep mode while working and won't wake up. After reset the MB Pro goes into Sleepmode befor I get the log in screen. After resettin SMC and PRAM I can log in but after a few minutes, againg deep sleep. I'ts not a software isue I think because when I use my MB Pro's harddrive by firewire as the startup disk on an other macbook it works fine. anyone knows about this problem?

It sounds obvious but are you sure your power adapter is ok and the battery is charged. The behaviour sounds a lot like low battery sleep.
Press the check button on your battery pack - do you get plenty of lights?

I phone 4s goes into continual boot after 8.1 update

Similar Messages

Maybe you are looking for