I-Phone 5 Problems

My phone has NEVER given me problems until about a week ago....With ALL bars and 4G, I'm still hit and miss on calling and texting...."Call Failed"...What the ****? AT&T says there is no problem on there end. Also, My battery won't last a full day now. Used to go 2 days with no problem?

Call Failed is normally a network problem, either an overloaded tower or network node failures. It can also be a side effect of a jailbroken phone or a defective SIM. You can try settings/general/reset - reset network settings. If that doesn't fix it, and a new SIM from your carrier doesn't help, and it isn't localized to a small area geographically, take the phone to an Apple store for diagnosis. Make an appointment first.

Similar Messages

Iam using 3g with the software 4.1.2 .. my phone undergoing problems like .. struck, slow op-eration... is this version supports 3g... or else wat should i do now to keep my phone safer and faster

iam using 3g with the software 4.1.2 .. my phone undergoing problems like .. struck, slow op-eration...
is this version supports 3g... or else wat should i do now to keep my phone safer and faster

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

I was lost my pad ios7.1 find my phone was activated lost mode enabled i recieved e mail when this action done also sound play was done also i recieved picture from i cloud on my i phone the problem is that i didnot recieve the place althought the icon no

i was lost my pad ios7.1 find my phone was activated lost mode enabled
i recieved e mail when this action done also sound play was done
also i recieved picture from i cloud on my i phone
the problem is that i didnot recieve the place althought the icon notify me when found was turned on ????

Ahmed elsaed abdelgalil wrote:
also i recieved picture from i cloud on my i phone
If you received a photo stream photo on your phone, save it to your camera roll, then locate the photo in the Photos section of the Photos app, tap the location listed above the photo in Moments and it should show you where it was taken on a map (assuming location services was enabled for the camera on your phone).

I have i phone 5 problems is when my phone battery left 20% then phone automatic shutter down plz tell me solution for this

i have i phone 5 problems is when my phone battery left 20% then phone automatic shutter down plz tell me solution for this

It seems like if you have a calibration issue with your battery percentage indicator.
To recalibrate the indicator, charge your battery to 100% then let it drain completely until the iPhone shuts down then charge it to 100% again and do not disturb it until it reaches 100%. This will reclaibrate your battery indicator.

Nokia Asha 206 Phone memory problem.

I have a Nokia Asha 206. Recently I updated it. After the update now out shows phone memory full all the time though I don't have any file in phone memory accept those which I could not delete. Please tell me how to solve this problem cause even if anyone sends me text msg it does not come to my phone cause memory is full. Even I can't send any msg. Everytime I try to send or receive something it showed memory full.i have external memory having 700mb free space but only 37kb internal free space.

Hi, wasimul. Welcome to our community. We suggest deleting some of your files like photos, videos, and text messages that you no longer need. You can also save your contacts directly to the memory card to avoid such issue. Another option is to reset it to its original settings. Here's how: Restore factory settings. The link is still applicable regardless of your location. We look forward to your reply.

I Phone 4 - problem with bluetooth after upgrading to ios 4.2.1

Since I have upgraded the software on my I phone 4, I have noticed a problem with my hands free kit in my car using bluetooth. When I make a call the sound comes through the system ok, but if I dial to voicemail the sound doesn’t come through. I never had this problem prior to the upgrade. Any suggestions?

At least there is a way! only problem by doing this is, on the vodafone network you have to input your phone number followed by a pin every time if you access using +447836 121 121. The short key 121 is the way forward! Will this be fixed? is there a way of taking the I phone 4 back to previous version of software?

One Apple ID two phones big problem.

Hi guys,
Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
I deleted user and created my user which was synced with iCloud and worked without any problem.
Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
So I have two doubts:
- I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
- another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
PLEASE HELP, in my country we have awful support !

Just left the Apple store with an official answer. You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.

Cell phone charging problem

Hi,
My Nokia 6234 is about 2-3 years old. And in the last few months I've started noticing a problem. When I fully charge my phone and it's at work, it loses charge in about a day... even when I don't use it much at all, and I don't use bluetooth, play games etc. The signal strength/network is fine.. so it shouldn't be because it's searching for a signal constantly. And this never happens anywhere except at work, ie. at home a full-charge lasts 3 days easily if i don't use it much. What could be the problem here? Something to do with the environment perhaps? Any ideas will be much appreciated

Yes.. Environment has its effects on the battery.. especially extreme Cold and extreme Hot temperatures.. but do you have remarkable difference at home and at work?

Free phone memory problem

i have a problem with my nokia 305 with freeing space at the expense when there is nothing to delete on phone

Plug your phone in to your PC and open BlackBerry Desktop Software. Once your phone has connected to it, click Device at the top of the software then Restore. A list of previous data backups will appear. Simply choose the second-most recent one (because the most recent one should be the one you're currently running on your phone) and load it. If you ever decide you wish to revert back to your current version of OS, simply follow those steps but pick the backup file at the very top of the list.
Please post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Nokia N91 phone memory problem

I have owned this Nokia N91 for a year and 9 months. Phone memory is a problem as i cannot recieve any messages. The message, not enough memory to recieve message(s), delete some data. I have taken absolutely everything off the phone memory except messages, contacts, and calender data, yet i still have something taking up 14 of my 15MB's of memory. What can i do as i can't recieve any messages. I have tried allocating messaging memory to the hard drive but i am presented with the same problem. Please help as i need to keep this phone working till May.

19-Apr-2008 06:11 PM
os2lover wrote:
Hi,
No the *#7370# doesn't affect your harddisk, only the phone memory.
Best regards,
Olivier Baum
ohh thanks for this info... Im just curious, how do we format the hard drive? Thanks
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

Solved Bluetooth cell phone pairing problem after 10.4.8 update

I am not sure why it works this way,but I tested it a few times and it was consistant.First I updated to version 10.4.8 . The 3 motorola razor phones I have were not able to pair anymore at all.Under 10.4.7 file transfers were no problem and pairing always occured.I use the d-link dbt 120 bluetooth adapter and until now (with 10.4.8) communication was never a problem when the adapter was attached to my belkin hub where it has a docking area for flash drives and mp3 players etc... .
When I now try to use the adapter on the usb hub it doesn't work now at all.I get messages that communication is not possible etc... . When I put the adapter on the one usb port on the front of my powermac g5 then I get very quick pairing ,file transfers etc... . I moved the bluetooth adapter back and fourth between the hub and the front of the computer and the result was always the same.The port on the mac works and others don't anymore.
The other ports on the usb hub worked fine with 10.4.7 but not with 10.4.8. It seems like the hub fell from grace or something with the new update. I felt better when I could get it to work. I wish I would have found this out before I did the archive and install though to go back to 10.4.7 .
I reupgraded to 10.4.8 then found the solution to my problem maybe 10 minutes away from a second archive and install to take me back to 10.4.7.

Hi Ralph,
Thanks for your response! Unfortunately I am enough of a newbie not to understand the implication of what you said Where should I look for these devices, and are they conflicting with iChat somehow? Do you mind telling me what action to take to fix this?
In the meantime I did a 10.4.9 update and airport stopped working completely. I talked to Apple support and they had me do a factory reset on my airport extreme basestation and reconfigure it in order to get to work again, and I have not tried video iChat since that happened.
Thanks!
Seleya
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.9)
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.9)

How do I get an unlocked iPhone 3GS out of recovery mode (connect to itunes error) on screen. Cannot do anything on phone until problem is fixed ...

After putting phone into DFU mode and attempting to restore and update the phone, at the end, an error message came up saying: "the iPhone could not be restored. An unknown error occured (1)."
How do I go about fixing this problem. I need to get my phone out of this (connect to itunes) mode. Everything I've tried does not work ! By the way, I have the latest version of itunes .. (iTunes 11)

Error 1 basically means you need to try two more times, and if the issue remains unresolved, contact Apple Support.
Resolve specific iTunes update and restore errors - Support - Apple
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

N73 phone freeze problem

Hi,
I am wondering if anyone could help me out.
My phone was working fine before..But suddenly one night,when I tried to dial a number, the screen freeze. I had to take off the battery then restarted again. At first, I could turned it off, but after 30sec, the screen blink onece and freeze and the screen became all black and turned off. Now, when I turn on the screen, only the word"NOKIA" appears, then the phone freeze. and I have to take off the battery to turn it off.
Does anyone know what problem is it? Hardware?Software?Firmware?
I would be reaaly appreciated if anyone could help me out...
Thanks guys...

you could try if a hard reset works
press and hold "green phone" +(3) +(*) and when they are pushed in press th "ON" button. i think this is the correct way
the phone should be turned of
This will reset all in phone so everything save in phone will get deleted. But as it seems you wont be able to save any information no matter how you do it.
If this dont work i guess that a Service point is your chance

I phone 5 problem with SIM

i bought a iphone 5 should have been unlocked to accept any sim in any country. the Cyprus sim i put in allowed me to open it after inserting my pass key and it shows a signal. then it comes up with this message and wont let me go any further.. "only compatible SIM cards from a supported carrier may be used to activate the iphone. pleaee insert the SIM card that came with you your iphone or visit a store to receive i replacemrnt SIM card". the phone didn't come with a SIM so what would the problem be? it seems like it may be still locked to a service provider......

Try taking the sim card out and re-inserting it and seeing if this helps or try and get hold of another sim card.
If any of these don't work then your only other option is to take the phone back to where you purchased it and check if it is truly unlocked or not.
Noone here can help you with that unless you go back to the place where you bought the phone in the first place.

New C6-01 user/phone and problem with backup/resto...

Hello everyone.
I recently purchased a new C6-01 (and first-time Nokia owner) and having trouble with getting maps restored onto a new 32GB uSDHC card and need some help.
It is my understanding that I can backup and restore all my phone contents and settings to a new memory card using Nokia Suite. So what I did is performed a complete backup using Nokia Suite, ejected the old uSD card (that came with the phone), put in the new uSD card that I had purchased and format it, then performed a complete restore to the phone and the new memory card.
During the restore, I saw errors on the phone display that said something like disk write error and gave me the option of stop or retry. I hit the retry a few times and still getting the error. Thinking it may be a bad uSD card, I returned/exchanged for another identical one. With the 2nd new card, I still get the same error message so I rebooted the phone and ran restore again but this time instead of restore everything all at once, I selected a few items at a time and eventually got everything restored, at least without errors this time.
When I ran maps after the restore, it told me that I needed to download the maps, and when I tried to download it thru a WiFi connection (at my house), I keep getting Disk error - cannot complete write. Retry or data will be lost. At this point if I run Files, it will show drive E but not any free space number (and selecting it will show free space not available). A reboot will bring back drive E and show 29.4GB free. So I am completely stumped at this point and believe that for whatever the reason I can not get maps loaded onto a non-Nokia-provided memory card.
I am running Nokia Suite 3.5.34 on WIndows XP w/SP3. The new 32GB uSDHC card is a class 4 card made by Sandisk. The phone is running the Belle Refresh v111.040.1511 dated 7/28/2012. Map version: v3.09 12wk20 b01-MW OpenGL MN-Map version 0.2.46.103
Sorry for the large amount of information posted here, but I wanted to provide enough details for you to look at. Please feel free to ask for more information and thank you in advance for your help.
Bill

yes I reformatted the card, and after it was finished, I ran Maps. When it told me I need to download the maps (and gave me 3 options), I exited and connected the phone to my computer, browsed and deleted the cities folder and the qf file. Waited a little bit and reran Maps. This time I used the WiFi connection from the phone to download.
I gave me an error when I tried to download the entire USA maps, so I selected Texas and Pennsylvania state maps. Those downloaded ok. Next when I tried to download New Jersey, it started a little bit and the disk error message came up again so I hit stop. Ran Files and saw the memory card is grayed-out (did not indicate and free space), I know the same problem is happening again.

H.323 endpoint to analog phone call problem

I have Tandberg H.323 endpoints registered in gatekeeper, Callmanager 4.2(1) and MGCP voice gateway to classic telephony. There is a problem, when I try to set up a call from H.323 endpoint to the analog phone through voice gateway. The call is set up but disconnets after about 3 seconds alerting signal. However you can have normal connection, when you answer the phone during theese three seconds of alerting. When it disconnects it says: 'Resource unavailable, unsecified'.
What can cause such problem?
Thanks in advance.

NO, I was using an Sx-20 as the H323 endpoint. I tried a different video confernece unit.The other confernce unit worked with out any issues. Sorry I wish I new what was wrong with the sx-20. What kind of h323 endpoint are you using?

I-Phone 5 Problems

Similar Messages

Maybe you are looking for